(2)A 20 MVA, 3-phase, star-connected, 50HZ, salient pole synchronous generator with X =1 pu, X = 0.65 pu, and negligible armature resistance is delivering 15MW at power-factor 0.8 lag to an 11kV, 50HZ system. Find the load angle d and per-unit excitation voltage E, under these conditions.
Q: Q5. When we design a 100-kW, 10000-rpm synchronous generator, should we use laminated silicon steel…
A: QN5: The synchronous generator is a 100kW and 10000 rpm machine. If we assume that it is a four-pole…
Q: A 3 phase 4MVA, 12 kV star connected synchronous generator has Zs= 0.8+J30 ohm. Using circle diagram…
A: 3φ synchronous generator,4MVA,12kVZs=0.8+j30 ΩZs=R+jX ΩR=0.8Ω
Q: A 100-MVA 12.5-kV 0.85-PF-lagging 50-Hz two-pole Y-connected synchronous generator has a per-unit…
A: Impedance in ohms = per unit impedance × base impedance. Internal induced voltage= terminal…
Q: EITY OF GOLOAO DENVER A 1500kW, three-phase Y-connected 2300V, 30-pole, 60HZ synchronous motor has a…
A: Given: Line voltage = 2300 V, Terminal voltage per phase Vϕ=23003=1327.9 V, Synchronous reactance…
Q: Problem 4.7: A 80 MVA, 4-pole, 60-Hz synchronous generator operates at 0.90 power factor lagging.…
A: In this question we need to find a inertia constant H.
Q: A 1000 kVA, 6.6 kV, 3-phase star connected cylindrical pole synchronous generator has a synchronous…
A: Given values are - S=1000kVAVt=6.6kVXs=20ohmUnity power factor.cosϕ=1
Q: (2)A 20 MVA, 3-phase, star-connected, 50HZ, salient pole synchronous generator with X; =1 pu, X =…
A:
Q: A. A 20KW, 440V, SHORT SHUNT COMPOUND DC GENERATOR HAS FULL LOAD EFFICIENCY OF 87%. IF THE…
A: NOTE: We’ll answer the first question since the exact one wasn’t specified. Please submit a new…
Q: A three-phase Y-connected synchronous generator has rated values of 90 MVA, 15 kV, 0.6 reverse power…
A: “Since you have posted a question with multiple sub-parts, we will solve the first three subparts…
Q: A 3-phase, Y connected, round rotor synchronous generator rated at 8KVA, 220V has a Synchronous…
A: Given synchronous generator details are S=8kVAVL=220V Synchronous reactance per phase is Xs=1Ω.…
Q: QUESTION 1:- (a) A 4-pole, 3-phase, star-connected, 50 Hz synchronous generator, with a…
A: “Since you have asked multiple questions, we will solve the first question for you. If you want any…
Q: A 3810 V, 50 Hz, Y-connected, eight poles synchronous generator has a per-phase synchronous…
A: In this question we will find phase induced emf and torque angle....
Q: A 3 phase 1.2 MVA, 10 kV star connected synchronous generator has Zs= 0.2+J10 ohm. Using circle…
A: Synchronous Generators, often known as alternators, are the most commonly used generators for…
Q: A 480 V, 50 Hz, Y-connected six-pole synchronous generator has a per-phase synchronous reactance of…
A: The synchronous generator is rotating at the synchronous speed. Thus, the speed of the rotation of…
Q: A 70-MVA, 69.3-kV, three-phase round-rotor synchronous generator has a synchronous reactance of 14…
A: (1) KVL equation to the above system Given rating of the machine is 70MVA power factor 0.87lag…
Q: EMachines A 100 MVA, 11.5 kV 0.8 pf lagging 50-Hz two pole Y-connected synchronous generator has a…
A:
Q: Question 3: A 3-phase, 11 kV, 10 MVA synchronous generator is connected to a load that has a power…
A: An alternator/Synchronous generator is a type of electrical machine that converts mechanical energy…
Q: 400 V 50 Hz, Y-connected, 6-pole synchronous generator per phase synchronous reactance 1.0 Ω at back…
A:
Q: A 480-V, 60-Hz, Y-Connected synchronous generator, having the synchronous reactance of 1.04 ohm and…
A: Generator is a device to convert a mechanical energy to electrical energy. It is work on the…
Q: A 3 phase 1.2 MVA, 10 kV star connected synchronous generator has Zs= 0.2+J10 ohm. Using circle…
A: A Synchronous Generator is also known as the alternator, the most widely used generator for power…
Q: |--E Q3) In a long-shunt compund generator, the terminal voltage is 230 V, when it delivers 150 A.…
A:
Q: A 50 Hz, 4-pole, Y-connected synchronous generator is supplying a load with Vt = 220-V /phase at…
A:
Q: Problem: A 30 kW, 250 volts shunt generator is overloaded by 30% by maintaining its emf at rated…
A:
Q: A shunt generator supplies a 24kW load at 230V through cables of resistance, R = 106mo. If the field…
A:
Q: A shunt generator supplies a 33kW load at 210V through cables of resistance, R = %3D 122m2. If the…
A:
Q: Q4 )) A 10-MVA three-phase, Y-connected 13800V two-poles, 60 Hz turbogenerator has an armature…
A:
Q: ase the speed slightly or decre shunt-field-circuit resistance slightly. Example 8.21(a). A 6-pole…
A: In this question we will find flux per pole , pole arc length and average air gap flux density....
Q: A long-shunt compound generator delivers a load current of 50A at 500V and has armature, series…
A:
Q: 4. (c) A 3-phase Y-connected synchronous generator supplies current of 15 A having phase angle Of…
A: A synchronous generator is a device that uses electromagnetic induction to transform mechanical…
Q: (a) A short shunt cumulative compound dc generator supplies 8kW at 235V. The Shunt field resistance,…
A: In this question we need to find a Induced EMF and load resistance of a short shunt compund genrator
Q: A three phase, 50 Hz, 4800V, 6 pole Y-connected synchronous generator connected to an infinite bus…
A: from given electrical power output we will find out the Excitation voltage. From excitation voltage…
Q: A 3-phase, Y connected, round rotor synchronous generator rated at 8KVA, 220V has a Synchronous…
A:
Q: 11 What is the dq component - Park transform The effective stator field current is I, = and the…
A: The direction of the direct-axis current is along the direction of the rotor magnetic field and the…
Q: A 287 -MVA, 115 -kV, 0.9-PF-lagging, 50-Hz, two-pole, del-connected synchronous generator has a per…
A:
Q: A 480-V, 50HZ, Y-connected, 6-pole synchronous generator has a per-phase synchronous reactance of…
A:
Q: Q6/ When a 50-k VA, 3-phase, 440-V, 60-Hz synchronous generator is driven at its rated speed, it is…
A: The solution is given below
Q: It has been determined by test that thesynchronous reactance Xs and armature resistance raof a…
A: Given: The Synchronous reactance, Xs=j8Ω The Armature resistance, Rs=0.1Ω The Line to line voltage,…
Q: A 4 pole lap wound shunt generator delivers 200A at a terminal voltage of 220V. Ra and Rsh are 0.02Ω…
A: For this problem, given terminal voltage is 220V, armature resistance 0.02ohms.
Q: (2)A 20 MVA, 3-phase, star-connected, 50HZ, salient pole synchronous generator with X =1 pu, X =…
A:
Q: Q-1. A 3 phase, 0.8 MVA, 3.3 kV, star - connected synchronous generator has 5 N/phase synchronous…
A:
Q: 4-A long shunt compound DC generator delivers a load current of 150A at 230V and has armature,…
A:
Q: Q1. Long-shunt generator delivers a load current of 30 A at 220 V. it has armature and shunt field…
A:
Q: A shunt generator supplies a 33kW load at 225V through cables of resistance, R = 100mΩ. If the…
A:
Q: Compare and contrast a cumulative compound DC generator and a differential compound DC generator in…
A: In cumulative compound DC generator series the series and parallel field flux are summed up whereas…
Q: A shunt generator supplies a 32kW load at 220V through cables of resistance, R = 128mΩ. If the…
A: A shunt generator supplies 32kW load at 220V through cables of resistance, Cable resistance R =…
Q: A 440 V, 3-phase, delta connected cylindrical synchronous motor with synchronous reactance of…
A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…
Q: Find the load angle and the components of armature current Id and Iq
A:
Q: shunt generator with a capacity of 250 kW and a voltage of 250 V has an armature circuit resistance…
A: Given, A shunt generator has, Terminal voltage (Vt)= 250 V Output power (Pout) = 250 kW Armerture…
Electric Machines2
Step by step
Solved in 3 steps with 3 images
- A 3 phase, star connected synchronous generator supplies current of 10A having phase angle of 20º lagging at 400V. Find the load angle and the components of armature current Id and Iq if Xd = 10 ohm and Xq = 6.5 ohm Assume armature resistances to be negligiblea) 3-phase star-connected synchronous generator supplies a current of 10A having phase angle of 20° lagging 400V (phase voltage). Given the direct and quadrature axis reactances as 10ohms and 6.5ohms respectively and neglecting armature resistance, Find: 1. The load angle 2 The direct and quadrature components of armature currents 3. Voltage regulationA 3 phase 4MVA, 12 kV star connected synchronous generator has Zs= 0.8+J30 ohm. Using circle diagram only, find: 1. The output power developed at unity power factor with excitation equal to 1.25 of rated voltage. 2. The load angle and power factor if the generator supplies (1500 KW) at rated voltage and excitation lequal to (1.2) of rated voltage. 3. Repeat part (2) when .armature resistance is neglected
- A 70-MVA, 69.3-kV, three-phase round-rotor synchronous generator has a synchronous reactance of 14 ohm per phase and negligible armature resistance. 1) The generator is delivering rated power at 0.87 power factor lagging at the rated terminal voltage to an infinite bus bar (Fig. 1). Determine the magnitude of the generated emf per phase and the power angle δ. 2) The generator is delivering 53.5 MW to the bus bar at the rated voltage with its field current adjusted for a generated emf of 46 kV per phase. Determine the armature current and the power factor. Is the power factor is lagging or leading? 3) Given that the generator is operating at the excitation voltage of Part (1), determine the maximum steady-state power which the machine can deliver without losing synchronism. Find the armature current corresponding to this maximum power.A shunt generator supplies a 31kW load at 230V through cables of resistance, R = 122mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =51mΩ. Determine the following below: The terminal voltage is, Answer and unit for part 1 The e.m.f. generated in the armature is,(a) A short shunt cumulative compound dc generator supplies 6kW at 235V. The Shunt field resistance, Series field resistance and Armature resistances are 8012, 0.192 and 0.22 respectively. Calculate the induced emf and load resistance.
- electrical machines 3. 400 V 50 Hz, Y-connected, 6-pole synchronous generator per phase synchronous reactance 1.0 Ω at back power factor of 0.9 full load armature current 50 A, friction and wind losses 1.25 kW and core losses at 50Hz full load 1.0 kW and armature resistance and loss are neglected. The excitation current is adjusted so that the no-load output voltage is 400V. According to this; a) Calculate the rotation speed of the generator. b) find the terminal voltages at load with rated current at 0.8 back power factor and unit power factor . c) Calculate the voltage regulation of the generator for power coefficients of 0.8 back and 1.0.4. A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder resistance of 0.10 ohm. Armature, shunt field resistance and series field resistance are 0.10 ohm, 52.5 ohms and 0.10 ohm, respectively. If the core, friction, and windage losses amount to 631 watts, determine (a) HP of driving engine (b) commercial, electrical and mechanical efficiencies.A shunt generator supplies a 20kW load at 200V through cables of resistance, R= 100mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =40mΩ, determine (a) the terminal voltage, and (b) the e.m.f. generated in the armature
- A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder and series field resistance 0.10 ohm. Armature resistance, shunt field resistance and series field resistance are 0.01 ohm, 52.2 ohms and 0.10 ohm, respectively. If the core friction and windage losses amount to 631 watts, the BHP of the driving engine is nearest toQUESTION 1:- (a) A 4-pole, 3-phase, star-connected, 50 Hz synchronous generator, with a synchronous impedance of j24.5 Ω/phase and negligible resistance, delivers 5 MW of power to a 13.8 kV busbar. At this operating point, the excitation is equal to 1.8 p.u. Calculate the phase value of the generated emf (E) and hence calculate the electrical load angle, δ, at which the machine is operating. (b) Sketch a typical operating chart for a salient pole synchronous generator and on the chart identify the following; The Apparent Power limit, The field (excitation) limit, The Real Power limit, A line which represents a constant lagging power factor, The rotor angle for operation at any given point of operation, e.g. rated power and 0.9 power factor lag. (c) A Stamford HCI534F framesize generator has been selected for a stand-alone diesel-generation application. The generator is to operate at 400 V, 50 Hz, with the self-excited (SX) excitation scheme. Datasheet information can be…A 20KW, 440V, short shunt compound dc generator has full load efficiency of 87%. If the resistance of the armature and interpoles is 0.4ohm and that of the series and shunt fields 0.25ohm and 240ohms respectively, calculate the combined bearing friction, windage and core loss of the machine A 10 kW 250 volts self-excited generator, when delivering rated load, has an armature-circuit voltage drop of 5% of the terminal voltage and a shunt field current equal to 5% of the rated load current. The resistance of the armature is 0.02 ohm. Calculate the voltage generated and power output.