4. A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder resistance of 0.10 ohm. Armature, shunt field resistance and series field resistance are 0.10 ohm, 52.5 ohms and 0.10 ohm, respectively. If the core, friction, and windage losses amount to 631 watts, determine (a) HP of driving engine (b) commercial, electrical and mechanical efficiencies.

4. A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder resistance of 0.10 ohm. Armature, shunt field resistance and series field resistance are 0.10 ohm, 52.5 ohms and 0.10 ohm, respectively. If the core, friction, and windage losses amount to 631 watts, determine (a) HP of driving engine (b) commercial, electrical and mechanical efficiencies.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder and series field resistance 0.10 ohm. Armature resistance, shunt field resistance and series field resistance are 0.01 ohm, 52.2 ohms and 0.10 ohm, respectively. If the core friction and windage losses amount to 631 watts, the BHP of the driving engine is nearest to
Q23) A shunt generator supplies a 20KW load at 200V through cables of resistance, R = 100mΩ. If the field winding resistance ,Rf=50Ω and the armature resistance, Ra=40mΩ, i) Estimate terminal voltage across the load. ii) Calculate the emf generated in the armature.
Show that an alternator running in parallel on constant-voltage and frequency bus-bars has a natural time period of oscillation. Deduce a formula for the time of one complete oscillation and calculate its value for a 5000-kVA, 3-phase, 10,000-V machine running at 1500 r.p.m. on constant 50-Hz bus-bars. The moment of inertia of the whole moving system is 14,112 kg-m2 and the steady short-circuit is five times the normal full-load value. ANSWER IS [1.33 second]
A 4 pole lap wound shunt generator delivers 200A at a terminal voltage of 220V. Ra and Rsh are 0.02Ω and 55Ω respectively. Neglecting brush drop, determine (i) armature current (ii) current per parallel path, (iii) generated voltage and (iv) Power developed.
A short-shunt compound generator delivers a load current of 30 A at220 V and has armature, series-field and shunt-field resistances of 0.04Ω, 0.20 Ω and 100 Ω respectively. Calculate the generated emf and thearmature current. Allow 1.0 V per brush contact drop.
A 25kW, 250V DC shunt generator has armature and field resistances of 0.06 ohm and 100 ohm respectively. Determine the total armature power developed when working (i) as a generator delivering 25kW output and (ii) as a motor taking 25kW.
10. A short shunt compound dc generator supplies 7.5 kW at 230 V. the shunt field, series field and armature resistance are 100, 0.3 and 0.4 ohms respectively. Calculate the induced emf.
A 3 phase 4MVA, 12 kV star connected synchronous generator has Zs= 0.8+J30 ohm. Using circle diagram only, find: 1. The output power developed at unity power factor with excitation equal to 1.25 of rated voltage. 2. The load angle and power factor if the generator supplies (1500 KW) at rated voltage and excitation lequal to (1.2) of rated voltage. 3. Repeat part (2) when .armature resistance is neglected
A short shunt compound DC generator delivers a load current of 30 A at 220 V and has armature, series field and shunt field resistances of 0.05, 0.3 and 200Ω respectively. Calculate the induced emf, the armature current and the voltage regulation. Allow 1 V per brush for contact dro
A DC shunt generator supplies a load of 27 kW at 210 V through the cables of resistance, R = 126 mΩ. If the field winding resistance, Rf = 62 Ω and the armature resistance, Ra = 35 mΩ, Determine (a) the terminal voltage, and (b) the E.m.f. generated in the armature. The terminal voltage is = The E.m.f generated in armature is =
the armature series field and shunt field resistance of a 125 kw, 250V long shunt cumulative compound DC generator are 0.025ohms, 0.01ohms and 30 ohms, respectively. If the stray power stray loss at rated load is 25 kW, determine the power in the shunt field. Assume a astray load loss of 1% of the load power output (note: Input power generator is equal to the motor brake horsepower, Pin=Pl+Plosses) Choices A. 2034.5 W B.2082.5 W C. 2065.5 W D. 2053.5 W
A shunt generator supplies a 30kW load at 215V through cables of resistance, R = 110mn. If the field winding resistance, Rf =680 and the armature resistance, Ra =45mn. Determine the following below: The terminal voltage is, The e.m.f. generated in the armature is,