4. Name the reference electrode of choice in the following applications: a. Measurements at 100° C. b. Non-halide tolerant system c. General purpose applications in turbid and/or precipitate containing systems 5. Describe the possible construction of an indicator electrode of the 2nd order for detection of sulfate ion.

4. Name the reference electrode of choice in the following applications: a. Measurements at 100° C. b. Non-halide tolerant system c. General purpose applications in turbid and/or precipitate containing systems 5. Describe the possible construction of an indicator electrode of the 2nd order for detection of sulfate ion.

Principles of Instrumental Analysis

7th Edition

ISBN:9781305577213

Author:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Publisher:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Chapter25: Voltammetry

Section: Chapter Questions

Problem 25.13QAP

See similar textbooks

Similar questions

A 40.00-mL aliquot of 0.05000 M HNO2 is diluted to 75.00 mL and titrated with 0.0800 M Ce4+. The pH of the solution is maintained at 1.00 throughout the titration; the formal potential of the cerium system is 1.44V a. Calculate the potential of the indicator electrode with respect to a saturated calomel reference electrode after the addition of 5.00, 10.00, 15.00, 25.00, 40.00, 49.00, 49.50, 49.60, 49.70, 49.80, 49.90, 49.95, 49.99, 50.00, 50.01, 50.05, 50.10, 50.20, 50.30, 50.40, 50.50, 51.00, 60.00, 75.00 and 90.00 mL of Cerium (IV). b. Draw a titration curve for these data. c. Generate a first- and second-derivative curve for these data. Does the volume at which the second-derivative curve crosses zero correspond to the theoretical equivalence point? Why or why not?
What Range of cathode potentials versus the saturated calomel electrode can be used to quantitatively separate Ag+ and Ni2+ by electrolytic deposition? Assume that the sample solution is initially 0.1000M in each ion and the quantitative removal of an ion is realized when only 1 part in 10000 remains undeposited. ESCE = 0.244V E0Red (Ag+) = 0.8V E0Oxid (Ni) = -0.25V
Given the following: A cell SCE // Ag2CrO4 (saturated), CrO42- (xM) /AG is used for the determination of pCrO4- (ESCE = -0.244 V at 25 C). The half reaction at indicator electrode is: Ag2CrO4(s) + 2e-   2 Ag(s) + CrO42- (E0 = +0.446 V) What is pCrO4, given the cell potential of 0.402? What type of indicator electrode is Ag in this situation?
In the analysis at 25 ° C of chloride using an ion selective electrode (ISE), two 100 mL solutions were prepared. These contain 1.0129x10-2 M and 1.01239x10-3 M Cl- and yielded a potential of 20.3 mV and 79.5 mV, respectively. The value of the electrode slope in mV is:
The following data were obtained using a nitrate electrode for a series of standard solutions ofnitrate: [NO ](M)E (mV)10–1 8510–2 15010–3 20910–4 262 please help me how to solve these questions huhuhu
Calculate the potential of the indicator electrode at 25o C relative to SCE at the equivalence point of the titration of 25.00 ml of 0.010 Fe2+ with 0.010 M Cr2O72- in a solution that is buffered at pH 3.50.
What is the purpose of immersing the electrode in a saturated KCl solution? Is it proper to store the electrode in deionized water? Why or why not? Explain clearly and thoroughly.
A 1.000 g sample containing chlorides, iodides and inert materials was treated with dilute nitric acid followed by AgNO3. A precipitate of AgCl (143.32) and AgI (234.77) was produced and weighs 0.9238 g. On heating in a current of Cl2, the AgI is converted to AgCl, and the resulting product weighs 0.7238 g. Find the percentage of a) NaI (149.89) and b) NaCl (58.44) in the sample
Is a quantitative separation of Zn2+ and Ag+ by electrolytic deposition feasible in principle? If so what range of cathode potential versus that saturated calomel electrode can be used? Assume that the solution is initially 0.1000M in each ion and that quantitative removal of an ion is realized when only 1 part in 1000 remains undeposited E0reduction of Zn2+ = -0.76V E0oxidation of Ag = -0.8V
What is the aim of submerging the electrode in a potassium chloride solution? Must this be stored in a distilled or deionized water? What is the aim of measuring the pH meter utilizing reference buffers?
Use the shorthand notation to describe a cell consisting of a saturated calomel reference electrode and a silver indicator electrode for the measurement of (a) pSCN. (b) pI. (c) pSO3 (d) pPO. Then, generate an equation that relates pAnion to Ecell for each of the cells. (For Ag2SO3 Ksp = 1.5 * 10-14; for Ag3PO4, K,p = 1.3 *10-20 ).
why the reference electrode can serve as a probe to measure relativereduction potentials or even detect a change in pH of solution