A 0.2420 g sample cntg. Calcium is dissolver and the metal precipitated as CaC2O4. The ppt. is filtered, washed and redissolved in acid. The pH is adjusted, 25 ml of 0.0400 M EDTA added and the xcss EDTA titrated with 33.28 ml of 0.012102 M MG2+. Calculate the % Ca (40.078) in the sample.
Q: A 25.00 mL aliquot of sample containing Hg in dilute nitric acid was treated with 10.00 ml of…
A: The question is based on concept of complexometric titrations. we are titrating mercuric solution…
Q: A 2.559 g sample containing both Fe and V was dissolved under conditions that converted the elements…
A: According to the mole concept, in terms of mass, the amount of substance in moles is equal to the…
Q: A 0.5745 g sample of an alloy containing principally bismuth and lead is dissolved in nitric acid…
A:
Q: The bismuth (AW 208.98) in 0.7405 g of an alloy was precipitated as BiOCl (FW 260.43) and separated…
A: Quantitative analyses are the methods and techniques used to estimate the amount of unknown…
Q: An unknown solution containing 25.00 mL of Ni2* in dilute HCI is treated with a known excess of…
A: Introduction : This question is basically based on back titration concept . Given : Molarity of…
Q: Iron(III) is best determined by addition of excess EDTA, followed by back-titration with a metal ion…
A: Fe3+ + EDTA4- => Fe(EDTA)-Cu2+ + EDTA4- => Cu(EDTA)2-Total moles of EDTA = volume x…
Q: A 1.00 g sample of NaOH which has been exposed to the air for some time is dissolve in water and…
A:
Q: The bismuth (AW 208.98) in 0.6805 g of an alloy was precipitated as BiOCl (FW 260.43) and separated…
A: Analysis of an unknown concentration of a sample can be done using the method of titration. This…
Q: Standard CaCO, is used to standardize the EDTA solution prior to titration. Suppose 0.385 g of CaCO,…
A:
Q: What is the pCu of the resulting solution if 25.00 mL of 0.400 MEDTA is added to 15.00 mL of 0.250 M…
A: This is a method of quantitative estimation of concentration of unknown solution by titrating it…
Q: The amount of iron in a meteorite was determined by a redox titration using KMnO4 as the titrant. A…
A: Redox titration involves the determination of concentration of a given analyte by using the concept…
Q: A salt sample was analyzed for its purity. A 0.5000g sample was dissolved in water and diluted to…
A:
Q: 0.500 g of an impure ammonium sulfate sample is dissolved in water and treated with an excess of…
A: The reaction that takes place is following: (NH4)2SO4 + 2NaOH --> NH4OH + Na2SO4. Ammonium…
Q: A salt sample was analyzed for its purity. A 0.5000 g sample was dissolved in water and diluted to…
A: The number of moles of a substance is defined as the mass of the given substance upon its molar…
Q: An antacid tablet, weighing 1.25 g, was dissolved in a 1.0 L volumetric flask to allow for…
A: Given: Mass of tablet=1.25g Volume of solution=1.0L Volume of aliquot 10.0mL Molarity of…
Q: a) What are the advantages and disadvantages of using potassium permanganate as a titrant?
A: “Since there are multiple questions and it is not mentioned that which one has to be solved so I am…
Q: The sulfate in a247.1 mg sample was precipitated as BasO4 by addition of 25.00 mL of 0.03992 M…
A: Given: Mass of sulfate = 247.1 mg Volume of BaCl2 = 25.00 mL Molarity of of BaCl2 =…
Q: A 0.2054 g sample of CaCO, (primary standard) is dissolved in hydrochloric acid and the solution is…
A: Ca2++EDTA →Cu2+EDTA2- complexation reaction* Primary standards, Moles of CaCO3 = 0.2054 gm100…
Q: A solution was prepared by dissolving 2.8 grams of EDTA (Na2H2Y.2H2O) in 1 L of water. This solution…
A: Reaction taking place during the Standardization of EDTA is,
Q: To analyze the amount of iron (Fe; Mw = 55.85 g/mol) contained in an ore sample, the sample was…
A: Given in the question, Volume of EDTA = 25 ml Molarity of EDTA = 0.2922 M Total moles of EDTA =…
Q: A 0.5745 g sample of an alloy containing principally bismuth and lead is dissolved in nitric acid…
A:
Q: An antihistamine sample, brompheniramine maleate, weighing 5.01234 g was dissolved in alcohol and…
A: Mass of an antihistamine sample, Brompheniramine maleate = 5.01234 g Molarity of AgNO3 = 0.3121 M…
Q: A sample of pure CaCO3 weighing 0.2428g is dissolved in HCI acid and the solution diluted to 250.0ml…
A:
Q: A 1.509-g samle of a Pb/Cd alloy was dissolved in acid and diluted to exactly 250.0 mL in a…
A: The explanation is given below-
Q: 1.000-g sample containing bromide was dissolved in sufficient water to give 100.0 mL. A 50.00 mL…
A: Since you have posted multipart of question as per the guidelines i have solved one three subpart…
Q: The Cl– content of a solution was analyzed via an EDTA titration. 2.00 g of AgNO3 was added to 25.00…
A: It is an example of back titration. In such type of titration, two titrants are present, out of…
Q: To determine the amount of magnetite. Fe3O4, in an impure ore, a 1.5419 g sample is dissolved in…
A: The Fe2O3 formed is pure. Hence, we can use it to determine the mass of iron taken initially in the…
Q: 5. 0.1500 g sample of chromium ore was dissolved and the chromium oxidized to chromate ion. The…
A: Answer: This question is based on the stoichiometric calculation where we have to convert the number…
Q: The Telluride ion was determined by indirect titration with EDTA. To a solution conta 50.00 mL of…
A: Given Concentration of Zn(ClO4)2= 0.08664 M Given Telluride Solutions = 50 ml We have to calculate…
Q: 0.8153 g of a sample containing Pb(NO3)2 was taken, dissolved in water, and 40.20 mL of 0.06 M EDTA…
A: A numerical problem based on EDTA titration, which is to be accomplished.
Q: A 1.000-g sample containing bromide was dissolved in sufficient water to give 100.0 mL. A 50.00 mL…
A: The answer is attached below-:
Q: A 14.92 g sample of bacon is pureed in a blender with 100.0 mL of water. The suspension is filtered…
A: First we balance the redox reactions involved in the above process
Q: Volhard titration. A 30.00-mL solution of unknown I2 was treated with 50.00 mL of 0.365 0 M AgNO3.…
A:
Q: The concentration of a solution of EDTA was determined by standardizing against a solution of Ca2+…
A: Weight of CaCO3 = 0.4302 g. Volume of CaCO3 solution = 60 mL. The volume of EDTA used = 632 mL…
Q: The bismuth (AW 208.98) in 0.7405 g of an alloy was precipitated as BiOCl (FW 260.43) and separated…
A: The balanced equations are Ag+ + Cl- -------------> AgCl (s) Ag+ (aq) + SCN– (aq)…
Q: A 1.3174-g sample containing the chloride salts of magnesium, mercury(II), and zinc was dissolved in…
A: 1.3174-g sample dissolved in 250 mL A 50.00 mL aliquot was treated with 10 mL as NH3/NH4Cl buffer at…
Q: The concentration of a solution of EDTA was determined by standardizing against a solution of Ca2+…
A: EDTA forms 1:1 complex with Ca2+ ions.
Q: *SHOW COMPLETE SOLUTION* A 4.971g sample containing the mineral tellurite was dissolved and then…
A: Solution - According to the question - Given - 3TeO2 + Cr2O72- + 8H+ ---> 3H2TeO4 + 2 Cr3+ + H2O…
Q: Calculate pMn² when 50.00 mL of 0,100 0 M Mn² is titrated with 25.00 mL of 0.200 0 M EDTA. The…
A: Given: 50.00 mL of 0.1000 M Mn2+ is titrated with 25.00 mL of 0.2000 M EDTA Kf = 7.76 × 1013 α =…
Q: Chromel is an alloy composed of nickel, iron, and chromium. A 0.6418-g sample was dissolved and…
A: The 0.6418 g sample contains three metals: nickel, iron, and chromium. This total sample is…
Q: A sample of mineral water containing Ca and Mg was analyzed by a complexation titration using EDTA…
A: Hardness of Ca2+ ions of the sample in gram of CaCO3 in ppm = M(Ca2+) ×M.w.(CaCO3)×106103 Hardness…
Q: A 0.2420 g sample cntg. Calcium is dissolved and the metal precipitated as CaC,O4 The ppt. is…
A: Solution -
Q: The calcium content of a milk sample was to be determined by EDTA titration. A sample weighing 0.206…
A:
Q: A water sample was tested for hardness. To titrate Ca2* and Mg2+, a 25.00-mL sample needed 7.39 ml…
A:
Q: To a 50.00-mL aqueous solution containing Pb2+ is added a total amount of 5.000 mmol EDTA. The pH…
A: This is a method of quantitative estimation of concentration of unknown solution by titrating it…
Q: . The brine solution has a significant amount of chloride, and it is determined by the Volhard…
A: Volume of AgNO3 = 15.25 ml Concentration of AgNO3 = 0.1163 M Volume of KSCN = 3.28ml Concentration…
Q: An alloy containing Ni, Fe and Cr was analyzed by a complexation titration using EDTA as titrant. A…
A: Given : Weight of sample = 0.7176 g For 50.0 ml Volume 1)26.14 mL of 0.05831 M EDTA 2)0.05831 M…
Q: What is the % Ca of the limestone.
A: Weight of lime stone sample = 400 mg Sample dissolved in acid and treated with excess sodium…
Q: A sample of mineral water containing Ca and Mg was analyzed by a complexation titration using EDTA…
A:
A 0.2420 g sample cntg. Calcium is dissolver and the metal precipitated as CaC2O4. The ppt. is filtered, washed and redissolved in acid. The pH is adjusted, 25 ml of 0.0400 M EDTA added and the xcss EDTA titrated with 33.28 ml of 0.012102 M MG2+. Calculate the % Ca (40.078) in the sample.
Step by step
Solved in 3 steps with 3 images
- Chromel is an alloy composed of nickel, iron and chromium.A 0.6472 g sample was dissolved and diluted to 250 mL. When a50 mL aliquot of 0.05182 M EDTA was mixed with an equal volumeof the diluted sample and all the three ions were chelated, a 5.11 mLback titration with 0.06241 M copper (II) was required.The chromium in a second 50 mL aliquot was masked through theaddition of hexamethylenetetramine, titration of the Fe and Nirequired 36.28 mL of 0.05182 M EDTA.Iron and chromium were masked with pyrophosphate in a third50 mL aliquot and the nickel was titrated with 25.91 mL of theEDTA solution.Calculate the percentage of nickel, chromium and iron in thealloy.A 0.7352g sample of ore containing Fe3+, Al3+ and Sr2+ was dissolved and made up to 500.00 mL. The analysis of metals was performed by a chemistry using complexation volumetry. Initially, an aliquot of 50.00 mL had its pH adjusted to 1.0 and titrated with a standard solution of EDTA 0.02145 mol/L, requiring 6.95 mL to reach the end point. Subsequently, another 25.00 mL aliquot was buffered at pH=5 and titrated with the same EDTA solution, requiring 6.24 mL to reach the end point. Finally, a third aliquot of 25.00 mL was titrated at pH=11, requiring 11.10 mL of the same EDTA solution to complete the titration. Determine the percentage of each of the metals in the sample Given the molar masses: Fe=55.845 g/mol; Al=26.982 g/mol and Sr=87.620 g/mol.Chromel is an alloy composed of nickel, iron and chromium. A 0.6553-g sample was dissolved and diluted to 250.0 mL. When a 50.00-mL aliquot of 0.05173 M EDTA was mixed with an equal volume of the diluted sample, all three ions were chelated, and a 5.34-mL back titration with 0.06139 M copper (II) was required.The chromium in a second 50.0-mL aliquot was masked through the addition of hexamethylenetetramine; titration of the Fe and Ni required 36.98 mL of 0.05173M EDTA. Iron and chromium were masked with pyrophosphate in a third 50.00-mL aliquot, and the nickel was titrated with 24.53 mL of the EDTA solution. Calculate the percentage of Cr in the alloy. Express your answer in 2 decimal places.
- The bismuth (AW 208.98) in 0.7405 g of an alloy was precipitated as BiOCl (FW 260.43) and separated from the solution by filtration. The washed precipitate was dissolved in nitric acid and treated with 19.45 mL of 0.1498 M AgNO3, causing the precipitation of AgCl. The excess AgNO3 required 13.29 mL of 0.1008 M KSCN for titration. Calculate the % Bi in the sample.A 0.5745 g sample of an alloy containing principally bismuth and lead is dissolved in nitric acid and diluted to 250.0 mL in a volumetric flask. A 50.00 mL aliquot is withdrawn, the pH adjusted to 1.5, and the bismuth titrated with 30.26 mL of 0.01024 M EDTA. The pH of the solution is then increased to 5.0 and the lead titrated with 20.42 mL of the same EDTA solution. Calculate the percentages of lead and bismuth in the alloy.A 3.25 g sample of an iron-containing mineral was dissolved in an acid medium and calibrated to 500 mL. A 25.00 mL aliquot was titrated with 0.0025 M KMnO4 spending a volume of 9.32 mL. Subsequently, a 25.00 mL aliquot was passed through a Walden reducer to later titrate it with the same permanganate solution, using a volume of 14.15 mL for the titration. Determine the percentage of Fe(III) in the sample and report it as % Fe2O3
- An antacid tablet, weighing 1.25 g, was dissolved in a 1.0 L volumetric flask to allow for determination of calcium carbonate and magnesium carbonate contents. After preparing the solution, an aliquot of 10.0 ml was transferred to an Erlenmeyer flask containing a buffer solution with pH = 10. This aliquot was then titrated with EDTA 0.0040 mol/L and the average volume spent was 15.01 mL. To measure calcium after precipitation After the magnesium was fractionated, a second 10.00 mL aliquot of the stock solution was transferred to an Erlenmeyer flask. and the pH of the present solution was adjusted to a value of approximately 13. In EDTA titration, the volume consumed for observation of the end point was equal to 13.03 mL. Based on this information, (a) Outline the two steps involved, representing the related reactions. (b) Calculate the concentrations of CaCO3 and MgCO3 present in the initial solution. (c) Calculate the masses of CaCO3 and MgCO3 present in the pellet. (d) Calculate the…. An antacid tablet, weighing 1.25 g, was dissolved in a 1.0 L volumetric flask to allow for determination of calcium carbonate and magnesium carbonate contents. After preparing the solution, an aliquot of 10.0 ml was transferred to an Erlenmeyer flask containing a buffer solution with pH = 10. This aliquot was then titrated with EDTA 0.0040 mol/L and the average volume spent was 15.01 mL. To measure calcium after precipitation. After the magnesium was fractionated, a second 10.00 mL aliquot of the stock solution was transferred to an Erlenmeyer flask, and the pH of the present solution was adjusted to a value of approximately 13. In EDTA titration, the volume consumed for observation of the end point was equal to 13.03 mL. Based on this information, a) Outline the two steps involved, representing the related reactions./5 b) Calculate the concentrations of CaCO3 and MgCO3 present in the initial solution./6 c) Calculate the masses of CaCO3 and MgCO3 present in the pellet./6 d) Calculate…The bismuth (AW 208.98) in 0.6805 g of an alloy was precipitated as BiOCl (FW 260.43) and separated from the solution by filtration. The washed precipitate was dissolved in nitric acid and treated with 15.02 mL of 0.1498 M AgNO3, causing the precipitation of AgCl. The excess AgNO3 required 14.04 mL of 0.1008 M KSCN for titration. Calculate %Bi in the sample.The bismuth (AW 208.98) in 0.6805 g of an alloy was precipitated as BiOCl (FW 260.43) and separated from the solution by filtration. The washed precipitate was dissolved in nitric acid and treated with 15.02 mL of 0.1498 M AgNO3, causing the precipitation of AgCl. The excess AgNO3 required 14.04 mL of 0.1008 M KSCN for titration. Calculate %Bi in the sample.
- A 0.9352g sample of ore containing Fe³+, Al³+ and Sr²+ was dissolved and made up to 500.00 mL. The analysis of metals was performed using complexation volumetry. Initially, an aliquot of 50.00 mL had its pH adjusted to 1.0 and titrated with a standard 0.03145 mol/L EDTA solution, requiring 6.95 mL to reach the end point. Subsequently, another 25.00 mL aliquot was buffered at pH=5 and titrated with the same EDTA solution, requiring 6.24 mL to reach the end point. Finally, a third aliquot of 25.00 mL was titrated at pH=11, requiring 11.10 mL of the same EDTA solution to complete the titration. Given the molar masses: Fe=55.845 g/mol; Al-26.982 g/mol and Sr-87.620 g/mol. a) Determine the percentage of each of the metals in the sample. b) Explain why the change in pH allows the determination of the three ions in this sample.A 1.250 g sample of cheese was subjected to KKjeldahl analysis to determine the amount of protein. the sample was digested and the nitrogen is oxidized to NH4+ and was then converted to NH3 with NaOH., and distilled into a collection flask containing 50.00 mL of .1050 M HCl. The excess HCl is back titrated with .1175M NaOH, this required 21.65 mL to reach the bromothymol blue endpoint. What is the reaction for the back titration for this analysis and the %N of cheese sample.A solid containing tris was dissolved in water and brought to a total volume of 50.00 ml. A 10.00 ml aliquot of the solution was titrated with 0.09978 M HCl to a bromcresol green endpoint. The aliquot consumed 38.93 ml of titrant. Calculate the weight of tris in the original sample.