A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness and quantitatively transferred to a 250 mL volumetric flask, and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was performed and was determined to be 0.4 mL. What is the concentration of EDTA obtained (MW CaCO3 = 100.0869 g/mol)?

A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness and quantitatively transferred to a 250 mL volumetric flask, and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was performed and was determined to be 0.4 mL. What is the concentration of EDTA obtained (MW CaCO3 = 100.0869 g/mol)?

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter17: Complexation And Precipitation Reactions And Titrations

Section: Chapter Questions

Problem 17.31QAP

See similar textbooks

Similar questions

A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of Ca2+ (40.0780 g/mol) in ppm?
A 5.00 mL tap water sample was measured out with a volumetric pipette, and added to a 25 mL Erlenmeyer flask. It was then titrated with a 0.0100 M Na2EDTA.2H2O solution, and found to take 0.635 mL of the EDTA solution to reach the blue endpoint.
A 500.0mg of butter was warmed and shaken vigorously with water. The undissolved material was removed by filtering and the aqueous portion was made 1.0M in HNO3 and 0.025M in Fe(NO3)3. This acidified solution was treated with 10.00ml of 0.1755M AgNO3 to precipitate the chloride ion and, after the addition of a small amount of nitrobenzene, 14.22ml of 0.1006M KSCN was required to back titrated the excess Ag+. Calculate the % NaCl in the butter.
A 5.323 g of dried eggshell is transferred to a 250-mL beaker and dissolved in 25 mL of 6 M HCl. The mixture was filtered and transferred into a 250 mL volumetric flask and diluted to the mark. A 20.00-mL aliquot is placed in a 125-mL Erlenmeyer flask and buffered to a pH of 10. The mixture was titrated with 0.04992 M EDTA and 43.25 mL was consumed to reach the end point. Determine the amount of calcium in the eggshell as %w/w calcium carbonate.
[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness and quantitatively transferred to a 250 mL volumetric flask, and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was performed and was determined to be 0.4 mL. What is the concentration of EDTA obtained (MW CaCO3 = 100.0869 g/mol)? 5.050 x 10-3 M 0.1284 M 0.1262 M 5.135 x 10-3 M
[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of CaCO3 of the unknown water sample in ppm? (MW CaCO3 = 100.0869 g/mol)? 633.43 ppm CaCO3 626.71 ppm CaCO3 637.27 ppm CaCO3 644.11 ppm CaCO3
[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of CaCO3 of the unknown water sample in ppm? (MW CaCO3 = 100.0869 g/mol)?
The Tl in a 9.76-g sample of rodenticide was oxidized to the trivalent state and treated with an unmeasured excess of Mg/EDTA solution. The reaction is Tl+3 + MgY-2 → TlY- + Mg+2 Titration of the liberated Mg2+ required 15.34-mL of 0.08560 N EDTA. The type of titration involved in the assay is ___ (direct/indirect/residual) and the percentage of Tl2SO4 in the sample is ____%. Molecular mass: Tl2SO4 = 504.8
A solid containing tris was dissolved in water and brought to a total volume of 50.00 ml. A 10.00 ml aliquot of the solution was titrated with 0.09978 M HCl to a bromcresol green endpoint. The aliquot consumed 38.93 ml of titrant. Calculate the weight of tris in the original sample.
The concentration of ammonia in a cleaning product was determined by back titration.Firstly, 10.00 cm3 of the cleaning product was pipetted into a large conical flask,containing 250.00cm3 of 0.50 mol/l HCl to give Solution A.Following a period of reaction and shaking, 50.00cm3 of Solution A was removed anddiluted to 250 cm3 with water in a volumetric flask to give Solution B.20 cm3 samples of Solution B were titrated against 0.05 mol/l Na2CO3 solution, givingan average titre of 12.45 cm3. i) Write equations for the reactions that have taken place.ii) Determine the concentration of NH3 in the original cleaning product in mol/l,g/l, ppm, and % w/v.
A 5.00 mL tap water sample was measured out with a volumetric pipette, and added to a 25 mL Erlenmeyer flask. It was then titrated with a 0.0100 M Na2EDTA.2H2O solution, and found to take 0.635 mL of the EDTA solution to reach the blue endpoint. How many moles of the 0.0100 M Na2EDTA.2H2O were added in the titration reaction? Show calculation. How many moles of calcium ions were reacted? Show calculation.
A foot powder sample containing Zn was dissolved on 50.00 mL water and was titrated to the end point color with 22.57 mL of 0.01639 M EDTA at pH=4. (α= 3.61x109, KKzny2 = 3.2 x 1016). The pZn in the sample is: