A 7.50 cm high annular copper cylinder with an inner radius of 2.00 cm and outer radius cm of 3.75 cm is subjected to an tangential force of 3.5 x 103 N. Find the angle of shear if the shear modulus is equals to 42 GPa.

A 7.50 cm high annular copper cylinder with an inner radius of 2.00 cm and outer radius cm of 3.75 cm is subjected to an tangential force of 3.5 x 103 N. Find the angle of shear if the shear modulus is equals to 42 GPa.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.11.3P: A thin-walled aluminum tube of rectangular cross section (sec fig me) has a centerline dimensions b...

See similar textbooks

Related questions

Q: 2. A rigid bar, hinged at one end, is supported by two identical springs as shown in the Fig. Each…

Q: propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable…

Q: A 10cm long shaft of 90mm diameter is facing 1000 N twisting force. Modulus of rigidity of the…

Q: shaft of 53 mm diameter is subjected to a bending moment of 1477158 N-mm and a torque T N-mm. If the…

Q: A flanged bolt coupling consists of 20-mm aluminum bolts evenly spaced around a bolt circle 30 cm…

Q: The area of the upper face of a rectangular block is .5mx.5m The lower face is fixed. The height of…

A: To find: The strain, stress and shearing force. Given: The dimension of rectangular block is l=0.5…

Q: Determine the maximum shear force in kN in the figure below. 16 kN | 4 kN/m 20 kN 2 kN/m A D

Q: g x direction. The initial strain along y direction. The initial strain in z direction Additional…

A: Rectangular steel block Lx = 3 inchLy = 2 inchLz = 4 inch Fx = + 30 kipsFy = -60 kipsFz = 54 kips

Q: steel shaft with a diameter of 40 mm and the length of 1.1 m transmits 60 hp from an electric motor…

Q: A solid shaft of 150 mm diameter is used to transmit torque. Find the maximum torque transmitted by…

A: Given, Diameter of shaft = d = 150 mm Maximum shear stress = τ = 45 N/mm2 Polar moment of…

Q: A hollow shaft with outside diameter of 135 mm and wall thickness of 8 mm transmits 182 kW at 400…

A: L=5m 1psi= 6894.76 N/m2

Q: . Determine the torque applied.

A: Determine the torque applied.

Q: " A thick steel cylinder which has an inside diameter of 1m is subjected to an internal pressure of…

Q: 11 A rectangular bar section of aluminium alloy has outside dimensions 100 mm x 50 mm, as shown in…

A: As illustrated in the image, a rectangular bar section of aluminium alloy has outer dimensions of…

Q: Solid steel wrench (shown in Fig. 4) has a radius of 0.4 cm. and a length of 0.2 m. What is the…

A: Given, diameter of the wrench , d=2×0.4 cm=0.8 cm=8 mm Length, L=200 mm Allowable shear stress,…

Q: A thin triangular plate PQR forms a right angle at point Q. During deformation, point Q moves to the…

Q: Lets consider a solid circuar shalt subjected to the torque loads as shown. Determine the minimum…

Q: A drill rod with a diameter of 12 mm is made of high-strength steel alloy with a shear modulus of 80…

Q: A rigid bar, hinged at one end, is supported by two identical springs as shown in Fig. P-349. Each…

Q: A hollow aluminum tube used in a roof structure has an outside diameter of 104 mm and an inside…

A: Given data: τ=48 MPaD=104 mmd=82 mmL=2.75 mG=28 GPa Need to determine the angle of twist.

Q: A solid steel post is subjected to pure torsion. Given: -post Diameter = 65 mm -length = 2.75 m…

Q: A mild steel shaft of 50 mm diameter is subjected to a bending moment of 2000 N-m and a torque T. If…

Q: Q3: The web of a girder of I-section is 45 cm deep and 1 cm thick; the flanges are each 22.5 cm wide…

A: Given Data: The magnitude of shear force, F=200 kN

Q: Hexagonal nuts for 6.25mm diameter bolts have a height of 5.5mm. If the ultimate strength of the nut…

A: Write the given values along with suitable variables.

Q: The rotation or twist in degrees of a shaft, 800 mm long subjected to a torque of 80 N-m, 20 mm in…

Q: A hollow shaft with outside diameter of 165 mm and wall thickness of 8 mm transmits 192 kW at 400…

Q: Torsional Loadings A hollow tube having an outside diameter and inside diameter of 100mm and 80mm…

A: Given:do=100 mmdi=80 mmL=250 mmG=28 GPa

Q: An external pressure of 10 MPa is applied to a closed-end thick cylinder of internal diameter 160 mm…

A: External pressure P= 10 Mpa Di = 160 mm ;r = 80 mm Do = 320 mm ; R =160 mm σcmax = 30 Mpa E = 207…

Q: Copper has a rigidity modulus 45 GPa. A cube of copper with 500 mm sides i tubjected to a shear…

Q: Examples 2 : A tangential force of 300N affected the tangents on the upper surface of a parallel…

Q: Read the question carefully and give me all right solutions. Internal torque at rod 1 (kip-ft)…

Q: Maximum shear stress developed on the surface of a solid circular shaft under pure torsion is 235…

Q: Q3: The web of a girder of I-section is 45 cm deep and I cm thick; the flanges are each 22.5 cm wide…

Q: Prob. # 3] The torsional deformation of a steel shaft is 1° in a length of 2 ft when the shearing…

A: Given data, L= 2ft= 24in. θ= 1°= 0.0174533 rad S= 10000 psi G= 12*10⁶ psi

Q: The area of the upper face of a rectangular block is .5mx.5m The lower face is fixed. The height of…

Q: Gears b and c have diameters of 10 cm and 4 cm, respectively. The maximum shear stress supported by…

Q: A torque T applied to a 1.2 m long and 50 mm diameter solid shaft increases until the shaft is fully…

Q: Q5(a) Explain the shearing force with reference to a load diagram and suggest an example for the…

Q: A shaft ABCD 70 mm in diameter is subjected to torques of 1500 N-m at B and 1100 N-m at C acting in…

Q: A W310 x 52 beam is made with a material that has a maximum shearing stress of 90MPa. Determine the…

A: As Given in Question:- Shearing Force = 90 Mpa W310*52 depth from table = 318 mm Area for this =…

Q: A shaft is subjected to an axial pull of ___ and transverse shear force of ___ The yield strength of…

A: (As per policy, for questions containing multiple subparts, experts are allowed to answer only three…

Q: A circular shaft measuring 3 meters in length with an inner and outer radius of 30 mm and 60 mm…

A: Given data: Length of shaft, L =3 m Inner radius, r1=30 mm = 0.03 m Inner Diameter = 0.06 m Outer…

Q: A solid rotating shaft of 5.08 cm in diameter and 0.914 m in length has a central load of 362.87 kg…

Q: MECHANICS OF DEFORMABLE BODIES The butt joint shown in the figure is connected using five 20mm…

Q: A drilling riser is used to drill a 4km deep hole into the seabed. The riser can be approximated as…

A: Given. G= 89 Gpa , d_o = 185 mm d_i = 160 mm P= 230 Kw N= 75 rpm

Q: A hydraulic punch press is used to punch a slot in a 0.60-in.-thick plate, as illustrated in the…

A: GivenThickness pf the plate t=0.60inshear stress τ=31ksid=0.5ina=2.75in

Question

A 7.50 cm high annular copper cylinder with an inner radius of 2.00 cm and outer radius cm of 3.75 cm is subjected to an tangential force of 3.5 x 10³N. Find the angle of shear if the shear modulus is equals to 42 GPa.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A circular aluminum tube subjected to pure torsion by torques T(sec figure) has an outer radius r2equal to 1.5 times the inner radius r1. (a) If the maximum shear strain in the tube is measured as 400 × 10-6 rad, what is the shear strain y1at the inner surface? (b) If the maximum a1lo-abk rate of twist is 0.125 °/m and the maximum shear strain is to be kept at 400 × 10-6 rad by adjusting the torque T, that is the minimum required outer radius ( r2)Min?
-7 A steel tube (G = 11.5 x 106 psi) has an outer diameter d2= 2.0 in. and an inner diameter dt=1,5 in. When twisted by a torque 7", the tube develops a maximum normal strain of 170 x 10-6. What is the magnitude of the applied torque T?
A propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable stress in shear is 48 MPa, and the allowable rate of twist is 2.0° in 3.5 meters. (a) Assuming that the shear modulus of elasticity is G = 80 GPa, determine the maximum torque that can be applied to the shaft. (b) Repeat part (a) if the shaft is now hollow with an inner diameter of 5d18. Compare values to corresponding values from part (a).
A thin-walled aluminum tube of rectangular cross section (sec fig me) has a centerline dimensions b = 6.0 in. and b = 4.0 in. The wall thickness t is constant and equal to 0.25 in. Determine the shear stress in the tube due to a torque T = 15 kip-in. Determine the angle of twist (in degrees) if the length L of the tube is 50 in. and the shear modulus G is 4.0 x 106 psi.
A circular tube AB is fixed at one end and free at the other. The tube is subjected to concentrated torques as shown in the figure. If the outer radius of the tube is 1.5 in, and the thickness is 3/4 in., calculate the strain energy stored in the tube. Let G= 11,800 ksi.
(30%) A circular aluminum tube subjected to T pure torsion by torques T has an outer radius r2 equal to 2 times the inner radius r1. (a) If the maximum shear strain in the tube is measured as 500x10-6 rad, what is the shear strain y1 at the inner surface? (b) If the maximum allowable rate of twist (0) is 0.15°/m and the maximum shear strain is to be kept at 500x10-6 rad by adjusting the torque T, what is the minimum required outer radius (r2 )min?
The area of the upper face of a rectangular block is .5mx.5m The lower face is fixed. The height of the block is 1cm. A shearing force applied to the top face produces a displacement of 0.015mm. Find the strain, stress and shearing force. Modulus of rigidity 4.5 x 10¹0 N/m².
A steel shaft with a diameter of 40 mm and the length of 1.1 m transmits 60 hp from an electric motor to a compressor. If the allowable shear stress is 50 MPa and the allowable angle of twist is 1.50, what is the minimum allowable speed of rotation.
A bar of 6-mm in diameter is only allowed to decrease at a maximum of 3.96% of its total length. What is the maximum force (Newtons) that can be applied? Consider the shear modulus = 602 MPa, and the Poisson's ratio as 0.20. Express your answer in three decimal places.
Steel bar whose length of 1.31 m and a radius of 13 mm is subjected to torque which produce a shear. If the angle of twist is 30° and shear modulus of 203 GPa. Determine the torque applied.
PART 1 My answer Ay=14.38 Cy=13.62 Part 2 Determine the shear force acting at each of the following locations: (a) x = 4.25- (i.e., just to the left of point B.) (b) x = 4.25+ (i.e., just to the right of point B.) (c) x = 9.25-(i.e., just to the left of point C) (d) x = 9.25+ (i.e., just to the right of point C) My Answer: (a) V= 14.38 kN (b) V= 14.38 kN (c) V= 14.38 kN (d) V= 28 kN Part 3 Determine the bending-moment acting at each of the following locations: (a) x = 4.25-(i.e.. just to the left of point B.) (b) x = 4.25+ (i.e.. just to the right of point B.) (c) x = 9.25 m (i.e., at support C) (d) x = 8.25 m My Answer: (a) M= 61.115kN-m (b) M= -148.885 kN-m (c) M= -76.985 kN-m (d) M= -91.365 kN-m Part 4: Use your bending-moment diagram to determine the maximum positive bending moment, Mmax, pos, and the maximum negative bending moment, Mmax, neg. Use the bending-moment sign convention detailed in Section 7.2. The maximum negative bending moment is the negative moment with…
2. A rectangular key was used in a pulley connected to a line shaft at 23 HP and 10 rps. If shearing of key is 230 Mpa, determine the force acting on key length if key width is one-fourth of shaft diameter and key length of one inch.