A line shaft rotating at 200 rpm is to transmit 20 kW. The allowable shear stress forthe material of the shaft is 42 MPa. If the shaft carries a central load of 900 N and issimply supported between bearing 3m apart, determine the diameter of the shaft.oThe maximum tensile or compressive stress is not to exceed 56 MPa.

Answered: Image /qna-images/answer/d7dc960b-88c5-43b6-8638-3bb723429b82.jpg

A line shaft rotating at 200 rpm is to transmit 20 kW. The allowable shear stress fo the material of the shaft is 42 MPa. If the shaft carries a central load of 900 N and simply supported between bearing 3m apart, determine the diameter of the shaf The maximum tensile or compressive stress is not to exceed 56 MPa.

A line shaft rotating at 200 rpm is to transmit 20 kW. The allowable shear stress fo the material of the shaft is 42 MPa. If the shaft carries a central load of 900 N and simply supported between bearing 3m apart, determine the diameter of the shaf The maximum tensile or compressive stress is not to exceed 56 MPa.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.9.3P: A vertical pole consisting of a circular tube of outer diameter 5 in. and inner diameter 4.5 in. is...

See similar textbooks

Similar questions

A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer diameter of 4.5 in. and thickness of O.OS in. Calculate the longitudinal stress, the circumferential stress, and the maximum shear stresses (out-of-plane and in-plane) at the outer surface of the tank.
A vertical pole consisting of a circular tube of outer diameter 5 in. and inner diameter 4.5 in. is loaded by a linearly varying distributed force with maximum intensity of q0, Find the maximum shear stress in the pole.
A prismatic bar with a length L = 3 ft and cross-sectional area A = 8 in2 is compressed by an axial centroidal load P = 10 kips. Determine the complete state of stress acting on an inclined section pq that is cut through the bar at an angle W = 35", and show the stresses on a properly oriented stress element.
A mild steel shaft transmits 18 kW at 450 r.p.m. It carries a central load of 900 N and is simply supported between the bearings 2.5 metres apart. Determine the size of the shaft, if the allowable shear stress is 42 MPa and the maximum tensile or compressive stress is not to exceed 56 MPa
The drive shaft AB of an automobile is made of a steel having allowable shear stress of tallow = 8 ksi. If the outer diameter of the shaft is 2.5 in. and the engine delivers 200 hp to the shaft when it is turning at 1140 rev>min, determine the minimum required thickness of the shaft’s wall.
A line shaft rotating at 320 rpm is to transmit 35 kW power. The allowable shear stress for the shaft material is 56 N/mm2. Determine the diameter of the shaft?
(6) A key is to be designed for a 12.7cm shaft which will transmit power of 150kW @ 360 rpm. If the allowable compressive stress is 1,200kg/cm2, determine: (a) cross-sectional dimensions of the square key to be used; (b) length of the key.
A mild steel shaft transmits P is 18 kW at N is 525 r.p.m. It carries a central load of 900 N and is simply supported between the bearings 2.5 metres apart. Determine the size of the shaft, if the allowable shear stress is 42 MPa and the maximum tensile or compressive stress is not to exceed 56 MPa.
A thick cylinder internal diameter 240mm external diameter240mm internal diameter ‘D’ is subject to external pressure of 50MPa. Determinethe diameter ‘D’ if the minimum hoop stress in the cylinder is not to exceed200MPa.
two solid steel shafts of different diameters are joined together at point C. the diameter of the smaller shaft is 0.5 in, while the diameter of the larger shaft is 1 in. if the supports at both ends, A & B, are unyielding / rigid, and a counterclockwise torque of 500 ft lb at point D, determine the maximum shear stress in the shaft in ksi. The modulus of rigidity for steel is 10800 ksi.Show full solution please
A thick cylinder internal diameter 240mm external diameter 240mminternal diameter ‘D’ is subject to external pressure of 40MPa. Determine the diameter‘D’ if the minimum hoop stress in the cylinder is not to exceed 200MPa in mm.
The shaft is supported on bearings that do not resist axial load. If the allowable shear stress for the shaft is Tadm = 40 MPa, determine, to the nearest 1mm, the smallest diameter that will support the load.