A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 104 N/mm2 and length of the shaft 7.5 m, find the maximum shear stress induced in the material of the shaft and the twist in radians.

A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 104 N/mm2 and length of the shaft 7.5 m, find the maximum shear stress induced in the material of the shaft and the twist in radians.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.7.8P: A tubular shaft being designed for use on a construction site must transmit 120 kW at 1,75 Hz, The...

See similar textbooks

Related questions

Q: A hollow aluminum propeller shaft, 30 ft. long with 15 in. outer diameter and an inner diameter…

Q: A solid shaft is required to transmit 120 kW power at 200 rpm. Find the suitable diameter of the…

A: Power, P = 120 kW Speed, N = 200 rpm Tmax = 1.2Tmean Shear stress, = 70 N/mm2…

Q: A hollow steel shaft transmits 600 kW at 500 r.p.m. The maximum shear stress is 62.4 MPa. Find the…

A: Find the outside and inside diameter .

Q: A hollow aluminum propeller shaft, 30 ft. Ilong with 15 in. outer diameter and an inner diameter…

A: (a) The maximum shear stress, τmax = 3.8 ksi. (b) The angle of twist of the shaft, θmax = 0.052…

Q: A hollow shaft of diameter ratio 3/5 is required to transmit 400 kW at 140 r.p.m with a uniform…

A: Given that ; Power P=400kW=400×103WSpeedN=140 rpmshear…

Q: A hollow shaft has an inner diameter of 0.035m and outer diameter of 0.06m. Compute for the torque…

A: Answer: The torque transmitted by the hollow shaft is 4500 N•m.

Q: A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the…

A: Given: Power transmitted by the shaft P=75kWSpeed of the shaft N=200rpmModulus of rigidity…

Q: shaft of 53 mm diameter is subjected to a bending moment of 1477158 N-mm and a torque T N-mm. If the…

Q: A solid shaft in a rolling mill transmits 30kW at 100 rpm. Find the diameter in mm of the shaft so…

Q: A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the…

Q: 5 - Shaft ABC is fixed at both ends. Segment AB is solid core and segment BC is hollow-core, with…

A: Given:LAB=0.4 mLBC=0.5 mDAB=40 mmDBC=60 mmdBC=30 mmGAB=28 GPaGBC=85 GPa

Q: Problem 3. A solid circular shaft of steel is transmitting 20 kW of power at 120 rpm. Determine the…

Q: 4 kN m 1.5 kN m Aluminum Steel Bronze B 100 mm 75 mm 3m 2 m 1.5 m- C FIG. P3.12 FIG. P3.11 3.12 The…

A: For solution refer below images.

Q: Q3 A hollow shaft with an external diameter of 160 mm transmits a maximum torque of 16 kN.m. If…

Q: ches and length 4.25 feet transmits 75 HP from an electric motor to a compressor. The allowable…

Q: A solid shaft of 150 mm diameter is used to transmit torque. Find the maximum torque transmitted by…

A: Given, Diameter of shaft = d = 150 mm Maximum shear stress = τ = 45 N/mm2 Polar moment of…

Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…

Q: A solid shaft in a rolling mill transmits 20 kW at 2 revolutions per second. The length of the shaft…

Q: A stepped shaft with diameters D1 = 40 mmand D2 = 60 mm is loaded by torques T = 1100 N. m(see…

A: Given Diameter, D1 = 40 mm D2 = 60 mm Torque, T = 1100 N . m Find…

Q: The shaft of a motor has a length of 15 times its diameter and has a maximum twist of 1.5 degrees…

A: Given: The length of shaft of motor, L = 15d The maximum twist in shaft = 1.5o The torque applied, T…

Q: A solid shaft in a rolling mill transmits 30 hp at 100 rpm. Find the diameter in mm of the shaft so…

Q: A hollow steel shaft, 12 m long, is required to transmit 1000 kW when running at a speed of 300…

A: Given that , L=12m =12000mm P=1000 kW =1000×106N-mm/s

Q: A solid steel shaft A of 60 mm diameter rotates at 300 rev/min. Find the greatest power that can be…

Q: A hollow steel shaft is stressed to 55 MPa by a torque of 100,000 ft-lb. If the inside diameter is…

Q: Lets consider a solid circular shaft having a diameter D = 40 mm subjected to a triangular…

A: Given: The diameter of solid circular shaft, D = 40 mm The torque acting on shaft, t = 100 N.m/m The…

Q: A full quarter-circular fillet is used atthe shoulder of a stepped shaft having diameterD2 =1.0 in.…

A: Diameter of step 2 D2 = 1 in Applied torque T =500 lb-in let the maximum shear stress at the stress…

Q: Determine the minimum diameter that can be used for a solid circular steel shaft which is limited…

Q: When subject to an applied torque,a circular shaft of length 600mm twists through an angle of 2°,if…

Q: Q6. A hollow circular shaft has an external diameter of 120 mm and the internal diameter is…

A: The inside diagram can be determined as shown below.

Q: 1. The hollow steel shaft (G=12 000000 Psi) must transmit a torque of 300000 Ib-in. The total angle…

A: Given data: The transitted torque, T=300000 lb·in. The shear modulus, G=12000000 psi. The angle of…

Q: Consider the case of shafts when subjected to axial loads in addition to combined torsional and…

Q: 7. A shaft with a length of 5 m is subjected to a twisting moment of T=4x10 N.mm. If J=620x10 mm,…

Q: 2 A hollow simple supported shaft 3m made of steel with di/do of 0.6. e shaft is subjected to a…

Q: A hollow shaft and a solid shaft constructed of the same material have the same length and the same…

Q: A steel shaft with a diameter 1.95 inches and length 4.35 feet transmits 80 HP from an electric…

A: Given dataDiameter = d= 1.95 incheslength = 4.35 feetAllowable shear stress = τallow = 8600…

Q: A shaft has an external diameter (ED) of 350 mm and an internal diameter of 150 mm.…

A: Given that, External diameter of shaft, D=350 mm,Internal diamter of shaft, d=150 mm,Length of…

Q: 2. A compound shaft consisting of an aluminum segment and steel segment is acted upon by two torques…

Q: A steel shaft 50 mm diameter and 500 mm long is subjected to a twisting moment of 1100 N-m, the…

Q: A shaft is required to transmit 1 MW power at 240 r.p.m. The shaft must not twist more than 1 degree…

A: Find the diameter of shaft and shear stress in the shaft.

Q: • For the solid shaft shown in the figure, determine the maximum shearing stress. And the twisting…

Q: A 2-inch line shaft is transmitting 20 hp rotating at 200 rpm, carrying two pulleys spaced 30 inches…

Q: A solid circular shaft of steel is transmitting 20 kW of power at 120 rpm. Determine the minimum…

Q: An I-section has the dimensions shown in Fig. Q4 and is subjected to an axial torque, T = 5000 N.m…

A: Axial torque = 5000 Nm Modulus of rigidity = 82 GN/m2

Q: 4. A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 10 N/mm² and length…

A: P=120 kWRPM, N=160C=G=8×104 N/mm2D=125 mmlength, L=7.5 m

Q: hollow steel shafts transmits 200kW of power at

A: Given Data : Speed(N)=150 rpm Power(P)=200 KW Length(L)=5 m Angle of twist(A) =30 Permissible…

Q: A tubular steel shaft transmits a power of P = 450 hp at a speed of 3000 rpm. Determine the maximum…

A: Given data: P=450 hp=335565 WattN=3000 rpmD=2.25 int=0.150 in Need to determine the torque, polar…

Concept explainers

Bending Moment

In general, we can define the bending moment as the reaction induced when a certain amount of load or force is applied to an element which makes it bend.

Question

100%

A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 104 N/mm2

and length of the shaft 7.5 m, find the maximum shear stress induced in the material of the shaft

and the twist in radians.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A stepped shaft ACB having solid circular cross sections with two different diameters is held against rotation at the ends (sec figure). If the allowable shear stress in the shaft is 6000 psi, what is the maximum torque (T0) that may be applied at section C? Find (T0)max if the maximum angle of twist is limited to 0.55º. Let G = 10,600 ksi.
A long, thin-walled tapered tube AB with a circular cross section (see figure) is subjected to a torque T. The tube has length L and constant wall thickness t. The diameter to the median lines of the cross sections at the ends A and B are dAand dB, respectively. Derive the following formula for the angle of twist of the tube: Hint: If the angle of taper is small, you may obtain approximate results by applying the formulas for a thin-walled prismatic tube to a differential element of the tapered tube and then integrating along the axis of the tube.
A propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable stress in shear is 48 MPa, and the allowable rate of twist is 2.0° in 3.5 meters. (a) Assuming that the shear modulus of elasticity is G = 80 GPa, determine the maximum torque that can be applied to the shaft. (b) Repeat part (a) if the shaft is now hollow with an inner diameter of 5d18. Compare values to corresponding values from part (a).
A thin-walled steel tube having an elliptical cross section with constant thickness t (see figure) is subjected to a torque T = 18 kip-in. Determine the shear stress and the rate of twist in degrees per inch) if G = 12 × 106 psi, t = 0.2 in., a = 3 in., and b = 2 in. Note: See Appendix E, Case 16, for the properties of an ellipse.
What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
A stepped shaft consisting of solid circular segments having diameters D1= 2.0 in, and D2= 2.4 in. (see figure) is subjected to torques T. The radius of the fillet is R = 0,1 in. If the allowable shear stress at the stress concentration is 6000 psi, what is the maximum permissible torque Tmax?
A hollow steel shaft used in a construction auger has an outer diameter d2= 6.0 in. and inner diameter d1= 4.5 in. (see figure). The steel has a shear modulus of elasticity G = 11.0 × 106 psi. For an applied torque of 150 kip-in., determine the following quantities: shear stress at the outer surface of the shaft, shear stress at the inner surface, and rate of twist (degrees per unit of length). Also, draw a diagram showing how the shear stresses vary in magnitude along a radial line in the cross section.
The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?
A circular aluminum tube subjected to pure torsion by torques T(sec figure) has an outer radius r2equal to 1.5 times the inner radius r1. (a) If the maximum shear strain in the tube is measured as 400 × 10-6 rad, what is the shear strain y1at the inner surface? (b) If the maximum a1lo-abk rate of twist is 0.125 °/m and the maximum shear strain is to be kept at 400 × 10-6 rad by adjusting the torque T, that is the minimum required outer radius ( r2)Min?
A thin-walled rectangular tube has uniform thickness t and dimensions a x b to the median line of the cross section (see figure). How does the shear stress in the tube vary with the ratio = a/b if the total length Lmof the median line of the cross section and the torque T remain constant? From your results, show that the shear stress is smallest when the tube is square (ß = 1).
A thin-walled aluminum tube of rectangular cross section (sec fig me) has a centerline dimensions b = 6.0 in. and b = 4.0 in. The wall thickness t is constant and equal to 0.25 in. Determine the shear stress in the tube due to a torque T = 15 kip-in. Determine the angle of twist (in degrees) if the length L of the tube is 50 in. and the shear modulus G is 4.0 x 106 psi.
A thin-walled steel tube of rectangular cross section (see figure) has centerline dimensions b = 150 mm and h = 100 mm. The wall thickness t is constant and equal to 6.0 mm. Determine the shear stress in the tube due to a torque T = 1650 N · m. Determine the angle of twist (in degrees) if the length L of the tube is 1.2 m and the shear modulus G is 75 GPa.