A spherical pressure vessel has an inside diameter of 4.9 m and a wall thickness of 17 mm. The0.27] that has a yield strengthvessel will be constructed from a special steel [E = 224 GPa; v =of 250 MPa. If the internal pressure in the vessel is 1410 kPa, determine (a) the normal stress inthe vessel wall. Answer in MPa rounded-off to 1 decimal place.

A spherical pressure vessel has an inside diameter of 4.9 m and a wall thickness of 17 mm. The vessel will be constructed from a special steel [E = 224 GPa; v = 0.27] that has a yield strength of 250 MPa. If the internal pressure in the vessel is 1410 kPa, determine (a) the normal stress in the vessel wall. Answer in MPa rounded-off to 1 decimal place.

A spherical pressure vessel has an inside diameter of 4.9 m and a wall thickness of 17 mm. The vessel will be constructed from a special steel [E = 224 GPa; v = 0.27] that has a yield strength of 250 MPa. If the internal pressure in the vessel is 1410 kPa, determine (a) the normal stress in the vessel wall. Answer in MPa rounded-off to 1 decimal place.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Show whether it is safe by calculating the stresses at point A according to the Tresca Criteria. (Diameter: 20 mm, σA = 320 MPa)
A steel rod is to withstand a pull of 10,000 pounds. If the ultimate stress is 50,000 psi and yield stress of 35,000 psi with a factor of safety of 4 and 2 based on ultimate and yield respectively, determine the required diameter of the rod.
A steel pipe 1.5m in diameter is required to carry an internal pressure of 750kPa. If the allowable tensile stress of steel is 140 MPa, determine the required thickness of the pipe in mm.
A pipe has an outside diameter of 0.7 inches and inside diameter of 0.12 inches. A force of 144 lbs is applied at the end of a 1.1 ft lever arm, causing the pipe to twist. What is the maximum stress in the pipe in psi? the correct answer is 28248 please show steps!!
A hollow metal tube with an inside diameter of 145 centimeters must carry a tensile load of 670 kilo newton. Determine the outside diameter of the tube, in meters, if the stress is limited to147 Mpa.
A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 30 mm. The outer diamter and thickness of the pressure vessel is 500 mm and 10 mm. Its length is 2m. Determine the maximum internal pressure (MPa) that can be applied if the longitudinal stress is limited to 155 MPa, and the circumferencial stress is limited to 55 MPa.
For the given system;a) Draw internal force diagrams and determine the most critical section.b) Show the stress distribution on this critical section and find the maximum normal stress.GIVEN: ℓ1 = 80 cm, ℓ2 = 40 cm, M = 8000 Ncm, b = 4 cm, h = 6 cm, t = 1 cm, F = 1400 N, qo = 30 N/cm .
A cantilever beam, 100 mm wide by 270 mm high and 9 m long, carries a load that varies uniformly from zero at the free end to 1300 N/m at the wall., Determine the magnitude of the stress in a fiber 50 mm from the top of the beam at a section 5 m from the free end. Answer must be in MPa.
Determine the maximum normal stress (in Mpa) in bar ABCD if the cross-sectional area of the bar is A = 556 mm2 and P= 36.79 kN. Round off the final answer to four decimal places.
A rod is hanging vertically, supports a load of 2000N. Neglecting the weight of the wire, determine the required diameter if the tensile stress is 140MPa.
A long thin walled cylindrical shell, closed at both the ends, is subjected to an internal pressure. What is the ratio of the hoop stress to longitudinal stress developed in the shell?
A nylon string has a diameter of 2 mm, pulled by a force of 100 N. Determine the stress.