Answered: (a): The cylinder for a hydraulic press…

(a): The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm. Find the maximum shear stress in the cylinder for an internal pressure of 940MPa.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.3.1P: A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer...

See similar textbooks

Related questions

Q: A shaft 30 mm diameter is transmitting power at a maximum shear stress of 80 MPa. If a pulley is…

Q: The cylinder for a hydraulic press has an insidediameter of 300 mm and an outside radius of…

A: Pressure is the intensity of force exerted perpendicularly on an area. Shear stress is the intensity…

Q: Referring to figure assume that the diameter of the rivet that joins the plates is d = 20 mm. The…

Q: A tiramisu cake has a top area of 1500 mm2 and a height of 30 mm. When a shearing force of cN is…

Q: A solid disc rotating with maximum velocity V and having Poisson's ratio is u, then the maximum…

A: A solid disc rotating with maximum velocity v,then maximum tangential , radial stress develops(c) At…

Q: Fig. (d) square steel bar in Fig. (b) are subjected to the same torque T. (Note that the volumes of…

Q: A hydraulic punch press is used to punch a slot in a 0.50-in.-thick plate, as illustrated in Figure.…

Q: Each of the four links in Figure 3 has an 8x36mm uniform rectangular cross section and each of the…

Q: The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm.…

A: Inside diameter = 300 mm Inside radius = 150 mm outside radius = 260 mm internal pressure = 80 Mpa

Q: A circular shaft is subjected to combined loads of bending M and torque T. With the help of Mohr's…

A: Circular shaft is subjected to combined loads of bending M and torque TNow,Bending stress induced in…

Q: Two shafts are being connected by a coupling which is held together by four 3/4-in diameter bolts.…

Q: A point On a free surface of a machine point (E = 214Gpa, G= 83Gpa) the stress state is shown on the…

A: GIVEN :- E = 214Gpa G= 83Gpa σy=15 MPaσx=-30 Mpaζxy=25 MPa

Q: Q3. For a closed end cylinder where the inner radius is 20 mm and outer radius is 40 mm, and the…

A: given data inner radius = 20 mm outer radius = 40 mm internal pressure = 5 Mpa

Q: Q2. Two 35 mm shafts are connected by a flanged coupling The flanges are fitted with 6 bolts on 125…

Q: Since each of the shafts AB, BC and CD shown in the figure consists of a solid circular bar,…

A: Given data: The diameter of the part AB is dAB=15 mm The diameter of the part BC is dBC=18 mm The…

Q: Each of the four links in Figure has an 8x36mm uniform rectangular cross section and each of the…

A: Consider the free body diagram as shown below for the link ABC. From the moment equilibrium about…

Q: A spring was made by a steel wire of 25 mm diameter around a 175 mm diameter cylinder. determine the…

Q: The torque shown in the figure is exerted on pulleys A, B and C. If it is known that the AB axis is…

Q: |F 2F a 3F| b a

Q: An aluminum alloy cylindrical roller with diameter 1.25 in and length 2 in rolls on the inside of a…

Q: A steel bolt of 6 mm in diameter has a tensile load of 40 kN. Find the average tensile stress at the…

A: Given A steel bolt Tensile load P=40kNMajor diameter(d1)=6 mmMinor diameter d2=4 mmAverage tensile…

Q: A body is subjected to a direct tensile stress of 300 MPa in one plane accompained by a simple shear…

A: Given data Direct tensile stress = 300 MPa Shear stress = 200 Mpa

Q: A steel and aluminum shafts with rigidity of (Gs = 77 GPa) and (Ga = 27 GPa) respectively. As shown…

A: The problem represents shearing of a composite shaft. The following diagram shows the dimensions of…

Q: The bell crank shown in Figure , is in equilibrium, a) Determine the required diameter of the…

A: Consider the Free Body diagram: a)Taking moment about Point D:P*0.2=30sin60*0.24P=31.1769…

Q: The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm.…

A: Given data, Internal diameter of the hydraulic cylinder, Di = 300 mm Outer radius of the cylinder,…

Q: The 12 kN.m torque is applied to the free end of the 5-m steel shaft. The angle of rotation of the…

Q: For the system of cylindrical shafts below, if the forces applied perpendicularly to the black…

Q: Define the main difference between thick and thin cylinders and give an example for each type of…

Q: Problem II. An exhaust gas piping fabricated as shown is subjected to a bending moment, an internal…

A: In this question, the normal stresses are acting on the elements as well as the shear stress is…

Q: Two shafts are being connected by a coupling which is held together by four 3/4-in diameter bolts.…

Q: Problem 1: During its operation, the drill shown below is jammed in the wall subjecting it to 20 N.m…

Q: 2- The normal stress in an inclined plane is 21.782 Mpa, the stress in the x-axis is 35 Mpa, in the…

Q: Find the proper spacing for 8-mm diameter steel rod for a 1.80-m diameter wood stave pipe if the…

Q: 40Mpa with σx = 70MPa σy = 40MPa Calculate the in-plane maximum shear stresses and angles using both…

Q: The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm.…

Q: Figure Q5 shows a thick cylinder of [A] mm intemal radius and [B] mm outer radius is subjected to an…

A: Given data: Inner Radius = A Outer Radius = B Internal Pressure = 60 MN/m2 External Pressure = 30…

Q: The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260…

A: The pressure difference between the inner and outer surfaces of a cylinder applies stress on the…

Q: A thin cylinder of inner radius 150 mm and thickness 9 mm is subjected to an internal pressure of 9…

A: Option A is correct 150 MPA

Q: Figure 1.1 shows a thick cylinder with inside radius of r;=94 mm and outside radius ro =136 mm was…

Q: The shaft consisting of steel and aluminum segments carries the torques T and 3T. Find the largest…

Q: 140mm 450 mm 100 mm | I kN In the figure, a force of 1 kN is applied by means of an arm connected to…

Q: a shaft 80mm diameter transmits power at maximum shear stress of 63 mpa. find the length of 20mm…

A: given; →diameter(d)=80mm→for power transmission on shaft shear…

Q: 1. Draw a diagram of the longitudinal force 2. Draw a diagram of normal stresses 3. Determine…

Q: 3. A cylinder with one closed end and one free end has an outer radius, b =260mm, and an inner…

A: solutionwe have given in the question.outer radius (r0)=260mminner radius (ri)=55mminterval pressure…

Q: A rod of square 30x 30mm^2 cross-section subject to a compressive axial force of 72kN and a twisting…

Q: For the pin connection shown, determine the normal stress acting on the gross area, the normal…

A: Given data Given force system

Concept explainers

Axial Load

When a bar of the uniform cross-section is acted by a load, such that the load acts along the longitudinal axis of the bar, such kinds of loadings are known as axial loadings. In general terms, a load is an external force acting on a component. An axial load acts perpendicular to the geometric cross-section of the component. Based on the direction of the application of the load, an axial load can be tensile or compressive. The analysis of bodies under the action of axial loads is generally studied under the branch of mechanics, known as statics.

Question

(a): The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm. Find the maximum shear stress in the cylinder for an internal pressure of 940MPa.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer diameter of 4.5 in. and thickness of O.OS in. Calculate the longitudinal stress, the circumferential stress, and the maximum shear stresses (out-of-plane and in-plane) at the outer surface of the tank.
‘7.3-11 The stresses on an element are sx= -300 psi and sy= 600 psi. Find the maximum shear stresses on the element and show them on a sketch of a properly oriented clement.
The hollow drill pipe for an oil well (sec figure) is 6,2 in. in outer diameter and 0.75 in. in thickness. Just above the bit, the compressive force in the pipe (due to the weight of the pipe) is 62 kips and the torque (due to drilling) is 185 kip-in. Determine the maximum tensile, compressive, and shear stresses in the drill pipe.
When drilling a hole in a table leg, a furniture maker uses a hand-operated drill (see figure) with a bit of diameter d = 4.0 mm. If the resisting torque supplied by the table leg is equal to 0.3 N · m, what is the maximum shear stress in the drill bit? If the allowable shear stress in the drill bit is 32 MPa, what is the maximum resisting torque before the drill binds up? If the shear modulus of elasticity of the steel is G = 75 GPa, what is the rate of twist of the drill bit (degrees per meter)?
A gondola on a ski lift is supported by two bent arms, as shown in the figure. Each arm is offset by the distance b = ISO mm from the line of action of the weight force W. The allowable stresses in the arms are 100 MPa in tension and 50 MPa in shear. If the loaded gondola weighs 12 kN, what is the minimum diameter roof the arms?
A circular steel tube of length L = 1.0 m is loaded in torsion by torques T (see figure). (a) If the inner radius of the tube is r1= 45 mm and the measured angle of twist between the ends is 0.5°, what is the shear strain y1(in radians) at the inner surface? (b) If the maximum allowable shear strain is 0.0004 rad and the angle of twist is to be kept at 0.45° by adjusting the torque T, what is the maxi mum permissible outer radius (r2)max?
The propeller shaft of a large ship has an outside diameter 18 in. and inside diameter 12 in,, as shown in the figure. The shaft is rated for a maximum shear stress of 4500 psi. If the shaft is turning at 100 rpm, what is the maximum horsepower that can be transmitted without exceeding the allowable stress? If the rotational speed of the shaft is doubled but the power requirements remain unchanged, what happens to the shear stress in the shaft?
A circular aluminum tube subjected to pure torsion by torques T(sec figure) has an outer radius r2equal to 1.5 times the inner radius r1. (a) If the maximum shear strain in the tube is measured as 400 × 10-6 rad, what is the shear strain y1at the inner surface? (b) If the maximum a1lo-abk rate of twist is 0.125 °/m and the maximum shear strain is to be kept at 400 × 10-6 rad by adjusting the torque T, that is the minimum required outer radius ( r2)Min?
A sign is supported by a pipe (see figure) having an outer diameter 110 mm and inner diameter 90 mm. The dimensions of the sign are 2.0 m X 1.0 m, and its lower edge is 3.0 m above the base. Note that the center of gravity of the sign is 1.05 m from the axis of the pipe. The wind pressure against the sign is 1.5 kPa. Determine the maximum in-plane shear stresses due to the wind pressure on the sign at points /I, B, and C, located on the outer surface at the base of the pipe.
A hemispherical window (or viewport) in a decompression chamber (see figure) is subjected to an internal air pressure of 85 psi. The window is attached to the wall of the chamber by 14 bolts. (a) Find the tensile force Fin each bolt and the tensile stress (T in the viewport if the radius of the hemisphere is 14 in. and its thickness is 1.25 in. (b) If the yield stress for each of the 14 bolts is 50 ksi and the factor of safety is 3.0, Find the required bolt diameter. (c) If the stress in the viewport is limited to 500 psi, find the required radius of the hemisphere.
A prismatic bar with a length L = 3 ft and cross-sectional area A = 8 in2 is compressed by an axial centroidal load P = 10 kips. Determine the complete state of stress acting on an inclined section pq that is cut through the bar at an angle W = 35", and show the stresses on a properly oriented stress element.
A thin-walled rectangular tube has uniform thickness t and dimensions a x b to the median line of the cross section (see figure). How does the shear stress in the tube vary with the ratio = a/b if the total length Lmof the median line of the cross section and the torque T remain constant? From your results, show that the shear stress is smallest when the tube is square (ß = 1).