Answered: The cylinder for a hydraulic press has…

The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm. Find the maximum shear stress in the cylinder for an internal pressure of (60 +120) MPa.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.3.1P: A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer...

See similar textbooks

Related questions

Q: A flanged bolt coupling consists of ten 20-mm diameter steel bolts spaced evenly around a bolt…

Q: The cylinder for a hydraulic press has an insidediameter of 300 mm and an outside radius of…

A: Pressure is the intensity of force exerted perpendicularly on an area. Shear stress is the intensity…

Q: Referring to figure assume that the diameter of the rivet that joins the plates is d = 20 mm. The…

Q: An aluminum tube with the cross section shown has a constant wall thickness of 2 mm. A torque T =…

A: Given, Thickness of wall, t=2mmTorque, T=400NmModulus of rigidity, G=28GPaOutside diameter of tube,…

Q: A punch for making holes in steel plates is shown in Figure 4. Assume that a punch having diameter d…

Q: A hydraulic punch press is used to punch a slot in a 0.50-in.-thick plate, as illustrated in Figure.…

Q: Q2. A mild steel shaft transmits 'P' kW at 'N' r.p.m. It carries a central load of 900 N and is…

A: Shaft is a rotating element that transmit power and rotation.

Q: Each of the four links in Figure 3 has an 8x36mm uniform rectangular cross section and each of the…

Q: Question 4. The shaft is made from a solid steel section AB and a tubular portion made of steel and…

A: Given data: T=50 kN.m Need to determine the angle of twist, at point C, maximum shear stress,…

Q: The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm.…

A: Inside diameter = 300 mm Inside radius = 150 mm outside radius = 260 mm internal pressure = 80 Mpa

Q: he cross section of a reinforced concrete beam is shown below. It has a modular ratio of 15. If the…

A: Givenm=15σcb=6N/mm2σst=120N/mm2

Q: A circular shaft is subjected to combined loads of bending M and torque T. With the help of Mohr's…

A: Circular shaft is subjected to combined loads of bending M and torque TNow,Bending stress induced in…

Q: Two shafts are being connected by a coupling which is held together by four 3/4-in diameter bolts.…

Q: Q3. For a closed end cylinder where the inner radius is 20 mm and outer radius is 40 mm, and the…

A: given data inner radius = 20 mm outer radius = 40 mm internal pressure = 5 Mpa

Q: Since each of the shafts AB, BC and CD shown in the figure consists of a solid circular bar,…

A: Given data: The diameter of the part AB is dAB=15 mm The diameter of the part BC is dBC=18 mm The…

Q: 3. An element in a strained body is subjected to a tensile stress of 100 MPa and a shear stress of…

A: When an amount of force act on an object, then the force has the tendency to change the shape of the…

Q: If the allowable normal stress is 120MPa and the allowable shear stress is 60MPa, what is the…

A: As per given question If the allowable normal stress is 120MPa and the allowable shear stress is…

Q: (a): The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of…

A: a) Given: The cylinder for a hydraulic press,*inside diameter d=300mm*outside radius…

Q: A flanged bolt coupling consists of eight 10-mm diameter steel bolts on a bolt circle 400 mm in…

A: Given:no=8do=10 mmDo=400 mmni=6di=10 mmDi=300 mmFo=8000 N

Q: A spring was made by a steel wire of 25 mm diameter around a 175 mm diameter cylinder. determine the…

Q: The torque shown in the figure is exerted on pulleys A, B and C. If it is known that the AB axis is…

Q: 1. In the figure, assume that a 20-mm diameter rivet joins the plates which are 100 mm wide. a. If…

A: Given allowable bearing stress Ss=140 MPa and shear stress Sc=80 MPaThe diameter of the rivet d=20…

Q: A cylindrical pressure vessel has an internal diameter of 2 m and is fabricated from plates 20 mm…

Q: An aluminum alloy cylindrical roller with diameter 1.25 in and length 2 in rolls on the inside of a…

Q: In figure as shown below, assume that a 35mm diameter rivet joint the plates which are each 150mm…

Q: PROBLEM 1,25 For the assembly and loading of Prob. 1.9, determine (a) the average shearing stress in…

Q: Q2- A steel pipe assembly supports a concentrated load of P = 22 kN as shown in Fig. 2. The outside…

Q: Two 6061-T6 aluminum tubular rods AB and BC are welded at B and loaded as shown in the figure (P =…

Q: A steel and aluminum shafts with rigidity of (Gs = 77 GPa) and (Ga = 27 GPa) respectively. As shown…

A: The problem represents shearing of a composite shaft. The following diagram shows the dimensions of…

Q: The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm.…

A: Given data, Internal diameter of the hydraulic cylinder, Di = 300 mm Outer radius of the cylinder,…

Q: The 12 kN.m torque is applied to the free end of the 5-m steel shaft. The angle of rotation of the…

Q: Que 5.6. A crane hook trapezoidal horizontal cross-section is 50 mm wide inside and 30 mm wide…

Q: Each of the four links in Figure 3 has an 8x36mm uniform rectangular cross section and each of the…

Q: In Fig. below, the vertical shaft and the pulleys keyed to it may be considered to be weightless.…

A: GIVEN: WORKING SHEAR STRESS, τ= 64MPa diameter of disc A=250mm diameter of disc B=500mm diameter of…

Q: Two shafts are being connected by a coupling which is held together by four 3/4-in diameter bolts.…

Q: Problem 1: During its operation, the drill shown below is jammed in the wall subjecting it to 20 N.m…

Q: The puncher is to drive a 25 mm diameter hole to a steel plate. If the allowable axial stress of the…

Q: Take the micro-body from the self-loading member, and bear the stress on it as shown in Figure a.…

A: For the given stress element,…

Q: The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm.…

Q: Determine the maximum shear stress at segment AB (in MPa) b. Determine the maximum shear stress at…

Q: A shaft 80 mm diameter transmits the power at maximum shear stress of 63MPa. Find the length of a…

A: Given details: d=80 mmζmax=63 MPawkey=20 mmζkey=42 MPa Formula used:…

Q: The halves of the coupling are held together by four 5/8-in.-diameter bolts. The working stresses…

Q: Figure 1.1 shows a thick cylinder with inside radius of r;=94 mm and outside radius ro =136 mm was…

Q: The flanges used in the connection of the two shafts are connected to each other with 6 bolts. The…

A: Given is shaft diameter (ds) = 100 mm Torque (T) = 300 N-m diameter of circle passing through bolt…

Q: The section of a crane hook is rectangular in shape whose width is 30 mm and depth is 60 mm. The…

A: Given that , width = 30mm depth = 60mm centre of curvature of the section is at a distance =125 mm…

Q: a shaft 80mm diameter transmits power at maximum shear stress of 63 mpa. find the length of 20mm…

A: given; →diameter(d)=80mm→for power transmission on shaft shear…

Q: II. A stepped shaft ACB having a solid circular cross sections with two different diameters and two…

A: Given LA= 225 mm ; diameter of circular cross section A (dA)= 20 mm ;And LB= 450 mm ; diameter of…

Q: Find the minimum size of a hole that can be punched in a 20 mm thick mild steel plate having an…

A: Punching is a process is used to make holes in the sheet metal by forcing a tool which is called a…

Concept explainers

Stress transformation

The term stress indicates the measure of internal forces that develop due to an external force's application on an object. When a specific external force is applied to an object, internal stress generates in the material. The value of stress can obtain by taking the ratio of the externally applied force and cross-sectional area of the object. There are different types of stress depending on the type of external force.

Question

): The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm. Find the maximum shear stress in the cylinder for an internal pressure of (60 +120) MPa.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Introduction

VIEW

Solution

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer diameter of 4.5 in. and thickness of O.OS in. Calculate the longitudinal stress, the circumferential stress, and the maximum shear stresses (out-of-plane and in-plane) at the outer surface of the tank.
A vertical pole consisting of a circular tube of outer diameter 5 in. and inner diameter 4.5 in. is loaded by a linearly varying distributed force with maximum intensity of q0, Find the maximum shear stress in the pole.
Solve the preceding problem if F =90 mm, F = 42 kN, and t = 40°MPa
The hollow drill pipe for an oil well (sec figure) is 6,2 in. in outer diameter and 0.75 in. in thickness. Just above the bit, the compressive force in the pipe (due to the weight of the pipe) is 62 kips and the torque (due to drilling) is 185 kip-in. Determine the maximum tensile, compressive, and shear stresses in the drill pipe.
A cylindrical tank subjected to internal pressure/? is simultaneously compressed by an axial force F = 72 kN (see figure). The cylinder has diameter d = 100 mm and wall thickness t = 4 mm. Calculate the maximum allowable internal pressure /?max based upon an allowable shear stress in the wall of the tank of 60 MPa.
A circular pole is subjected to linearly varying distributed force with maximum intensity t0. Calculate the diameter daof the pole if the maximum allowable shear stress for the pole is 75 M Pa.
An aluminum pole for a street light weighs 4600 N and supports an arm that weighs 660 N (see figure). The center of gravity of the arm is 1.2 m from the axis of the pole, A wind force of 300 N also acts in the (y) direction at 9 m above the base. The outside diameter of the pole (at its base) is 225 mm, and its thickness is 18 mm. Determine the maximum tensile and compressive stresses o, and e1., respectively, in the pole (at its base) due to the weights and the wind force.
The state of stress on an element along the hydraulic lift cylinder on a truck is trv= — 5 MPaLFind the maximum shear stress on the clement and show the state of stress on a sketch of a properly oriented clement.
A gondola on a ski lift is supported by two bent arms, as shown in the figure. Each arm is offset by the distance b = ISO mm from the line of action of the weight force W. The allowable stresses in the arms are 100 MPa in tension and 50 MPa in shear. If the loaded gondola weighs 12 kN, what is the minimum diameter roof the arms?
The stresses acting on an element are x= 750 psi, y= 600 psi, and xy = 400 psi. Determine the principal stresses and show them on a sketch of a properly oriented element.
Repeat the previous problem using ? = 50° and stresses on the rotated element: sy1= 70 MPa, ??y1=-82 MPa, and tx1y1=-35 MPa.
The normal and shear stresses acting on element B are ??x= -46 MPa, sy= -13 MPa, and txy= 21 MPa (see figure for Problem 7.2-10). Determine the maximum shear stresses and associated normal stresses and show them on a sketch of a properly oriented element.