A v-belt drive is to transmit 330kW power from a pulley of 1m diameter running at 250rpm. The safe pull in each belt is 800N and the mass of the belt is 0.46kg per meter length. The angle of lap and the groove angle is 160º and 45º respectively. If the coefficient of friction between the belt and the pulley is 0.3. Calculate the number of belts required

A v-belt drive is to transmit 330kW power from a pulley of 1m diameter running at 250rpm. The safe pull in each belt is 800N and the mass of the belt is 0.46kg per meter length. The angle of lap and the groove angle is 160º and 45º respectively. If the coefficient of friction between the belt and the pulley is 0.3. Calculate the number of belts required

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Two pulleys, one 425mm diameter and the other 210mm diameter are one parallel shaft 2m apart and are connected by a crossed flat belt. Find the length of the belt required and the angle of conduct between the belt and each pulley. What power can be transmitted by the belt when the larger pulley rotates at 200 rev/min, if the maximum permissible tension in the belt is 1 kN, and the coefficient of friction between the belt and pulley is 0.3?
Two parallel shafts whose centre lines are ‘5’ m apart, are connected by an open belt drive. The diameter of the larger pulley is ‘3’ m and that of smaller pulley ‘3’ m. The initial tension in the belt when stationary is ‘4’ kN. The coefficient of friction between the belt and the pulley is 0.3. Calculate the power transmitted, when the smaller pulley rotates at ‘700’ r.p.m. and length of the belt.
A V-belt drive transmits 20kW from an electric motor running at 1440rpm to the main shaft of a roving machine. The motor and main shaft pulleys have 300 & 600 rpm respectively. The coefficient of friction between belt and pulley is 0.25. The centre distance between the shafts is 1000mm. The top width, thickness, section angle and density of belt and permissible tension on the belt are 22mm, 14mm and 40deg, 0.97gcm-2 and 600N respectively. How many belts are needed? Calculate the length of a belt needed
Two pulleys, one 650 mm diameter and the other 400 mm diameter, on parallel shafts 1.5 m apart are connected by a flat belt. Find the length of the belt required and the angle of contact between the belt and each pulley. What power can be transmitted by the belt when the larger pulley rotates at 1200 rev/min, if the maximum permissible tension in the belt is 10 kN, and the coefficient of friction between the belt and pulley is 0.05? give proper explaination and dont give handwritten solution.
Note: If you don't know the solution please leave it but don't give me wrong solution. A flat open belt drive is used to transmit a power of 25kW from a motor shaft rotating at 950 rpm. The radius of the pulley of the motor shaft is 125mm while the radius of the puller of the driven shaft is 450mm. The center distance between the shafts is 2,250mm. the coefficient of friction is 0.25 and the density of the belt material is 950 kg/m^3. The belt width is 126 mm. The allowable stress is 2.6MPa. Determine the thickness of the belt.
A V-belt drive has an included angle of 38°, belt weight of 3N/m, belt cross-sectional area of 145 mm, coefficient of friction of 0.25, r = 150 mm, ϕ= 160°, n= 3000 rpm, and F= 800 N. Calculate a. The maximum power transmitted. b. The maximum stress in the belt. 10/10 A)38.5kW, 10.5MPa b)40.5kW, 11.2MPa c)42.95kW, 11.8MPa d)37kW, 38MPa Show that the correct answer is C
In an open flat belt drive, a pulley of 800 mm diameter runs at 300 r.p.m. The coefficient of friction between the belt and the pulley is 0.25, the angle of lap is 170° and the maximum tension in the belt is 2000 N. The power transmitted is: 10.5 kW 9.4 kW 8.9 kW 7.6 kW None of the mentioned 13.1 kW
Two pulleys, one 650 mm diameter and the other 400 mm diameter, on parallel shafts 1.5 m apart are connected by a flat belt. Find the length of the belt required and the angle of contact between the belt and each pulley. What power can be transmitted by the belt when the larger pulley rotates at 1200 rev/min, if the maximum permissible tension in the belt is 10 kN, and the coefficient of friction between the belt and pulley is 0.05? dont write handwritten solution.
An industrial fan running at 600 rpm is driven by a 25kW, 960rpm, induction motor using an open belt drive. The pulley is mounted on the motor shaft of 270mm diameter. Center distance between the two shafts is 1.45 meters and coefficient of friction is 0.35. Assume thickness of belt equal to 6.5 mm and an allowable stress of 2.86MPa for belt material. Calculate the following: a) Angle of lap for both pulleys; b) Length of the belt; and c) Width of the belt (disregard standard size).
Two identical pulleys with diameter of 711 mm, are mounted on two parallel shafts for flat belt drive system. The maximum permissible tension in the belt is 2,691 N and the coefficient of friction between belt and pulley is 0.31. The centrifugal tension acting on the belt is 887 N. Calculate the power that can be transferred in Watts if the rotational speed of the driving pulley is 978 r.p.m.
A multi plate clutch has three plates and four pressure plates, pressed together by an axial force of 500N. µ = 0.3. The outer radius of the plates is 100mm, and the inner radius is 80mm. Calculate the torque that the clutch can transmit. If the inner radius and axial force are to remain the same, but the torque is increased by 25%, what must the outer radius than
A flat belt drive connects two pulleys 5 meters apart. The 2m pulley diameter driver rotates at 350rpm, and the driven pulley has a diameter of 1.5m. The thickness and the mass of the belt drive is 5mm and 0.6kg respectively. The coefficient of friction between the belt and the pulley is 0.25. The belt experience 3% of slip during power transmission with a maximum tension of 1200N.Calculate the speed and torque of the driven shaft.