A vertical cylinder 1.5m high and 180 mm in diameter is maintained at 100C in an atmosphere environment of 20C.calculate heat loss by free convection from the surface of the cylinder for air take p=1.06 kg/ m2.v=18.97*10 -6 m2/s.Cp=1.004kJ/kg2C and k=0.1042kJ/ mh2C

A vertical cylinder 1.5m high and 180 mm in diameter is maintained at 100C in an atmosphere environment of 20C.calculate heat loss by free convection from the surface of the cylinder for air take p=1.06 kg/ m2.v=18.97*10 -6 m2/s.Cp=1.004kJ/kg2C and k=0.1042kJ/ mh2C

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter6: Forced Convection Over Exterior Surfaces

Section: Chapter Questions

Problem 6.4P: An electrical transmission line of 1.2-cm diameter carries a current of 200 amps and has a...

See similar textbooks

Related questions

Q: The temperature of a cylindrical tank containing liquid nitrogen is -10°C. Tank diameter is 16 cm.…

A: Given data: Here, Ts represents the liquid temperature, d represents the diameter, Q̇ represents…

Q: Chips of width L_15 mm on a side are mounted to a substrate that is installed in an enclosure whose…

Q: 7: horizontal steel pipe having a diameter of 5 cm is maintained at a temperature of 50◦C in a large…

A: Please find the answer below

Q: PROBLEM 1: A horizontal electrical heater of outside diameter D=0.025m and length L=2 m dissipates…

Q: A black plate (e = 1) of dimensions 1 m x 1 m x 0.025 m is maintained at its top a temperature of…

A: The answer is given below

Q: At the end of its manufacturing process, a silicon wafer of diameter d = 258 mm , thickness ô =1 mm…

A: Given data: d=258 mmδ=1 mmTi=325°CT0=25°C Need to determine the initial rate of cooling by…

Q: What electrical current is required to maintain a 0.076 mm diameter, 0.6 m long vertical wire at…

A: NOTE:- Here, we have to use correlation for find out the convection heat transfer rate.So, answer…

Q: 7. A horizontal heated pipe with diameter D = 2 cm is maintained at 60°C in a room where the…

A: Since you have asked multi-questions, we can provide you the solution to the first question only. TO…

Q: A cylindrical bread at 145°C is cooling in air at 28°C. The loaf has 25 cm length and 7 cm radius.…

Q: The surface temperature of a 10 m long and a 6-cm-diameter horizontal hot water pipe is 73 ℃. Assume…

A: Given:Surface tempearture of pipe,TS=73οCDiameter of pipe,D=6cm=0.06mPrandtl…

Q: When a rectangle steel block 0.45 m by 0.65 m by 0.7m is initially at 450C. It is suddenly immersed…

Q: 3) Explain the difference between forced and free convection

Q: A cylindrical steel tank with a diameter of 1.8m and a height of 2m, is insulated with polyurethane…

Q: An electronic component with dimension of 5 cm wide, 6 cm high, and 9 cm long is cooled by aluminum…

A: Fins are used to improve heat transfer from surfaces in a variety of applications. When the…

Q: If heat is rejected from the chips by radiation and natural convection, what is the maximum…

A: Given: L=15 mm=0.015 m Tsurr=25oC=298 K Ts=85oC=358 K hnatural=11.7 W/m2K hforced=250 W/m2K To…

Q: EXAMPLE 7: Air at 5°C and 70 kPa flows over a flat plate at 6 m/s. A heater strip 2.5 cm long is…

Q: The spherical, thin – walled metallic container is used to store liquid nitrogen at 77 K. The…

Q: A vertical, double-pane window(square), which is 1 m on a side and has a 25-mm gap filled with…

Q: A thermocouple junction, which may be approximated as a sphere, is to be used for temperature…

Q: What electrical current is required to maintain a 0.076 mm diameter, 0.6 m long vertical wire at…

A: Whenever electric current passes through a conductor with resistance heat will be generated. This is…

Q: Consider a 0.5-m x 0.8-m thin square plate in a room at 25°C. One side of the plate is maintained at…

A: In this problem, the dimension of plate is 0.5 m by 0.8 m which is not a square plate but it is a…

Q: A house has a composite wall of wood (k = 0,12 W/(m.K), fiberglass insulation (k = 0,038 W/(m.K),…

A: The heat exchanger is a device used to transfer heat from one fluid to another fluid. For heat…

Q: You’ve experienced convection cooling if you’ve ever extended your hand out the window of a moving…

Q: An 8-m long square duct with thin metal walls is hanging in a room where the temperature is 10 °C.…

A: Length of the duct, L=8 mRoom temperature, T∞=10oCAir inlet temperature, Ti=75oCoSpecific heat of…

Q: The rear window of an automobile is defogged by passing warm air over its inner surface. If the warm…

Q: Chips of width L _ 15 mm on a side are mounted to a substrate that is installed in an enclosure…

A: GivenTs=85+273=358 kTsur=T∞=298 ka) h=11.7 W/m2Kb) h=250W/m2KL=15 mmε=0.60

Q: For the Convective Heat Transfer experiment, describe the difference in the procedures: Natural or…

Q: A cylindrical bread at 145°C is cooling in air at 28°C. The loaf has 25cm length and 7 cm radius.…

Q: Saturated steam at 4 bars absolute pressure with a mean velocity of 3 m/s flows through a horizontal…

Q: The heat transfer from a 2-m-diameter sphere to a 25 °C air stream over a time interval of one hour…

Q: A 6-in-wide and 8-in-high vertical hot surface in 78°F air is to be cooled by a heat sink with…

A: In thermodynamics when the energy from the high temperature medium to the low temperature medium…

Q: Differentiate between free and forced convection with examples.

Q: If the cost of producing the hot water is $0.10 per kWh, what is the representative daily cost of…

Q: A square aluminum plate 5 mm thick and 240 mm on a side is heated while vertically suspended in…

Q: At the end of its manufacturing process, a silicon wafer of diameter d = 258 mm , thickness ô =1 mm…

Q: Exhaust gases from a manufacturing plant are being discharged through a 10-m-tall exhaust stack with…

A: Given data: The height of the plant, L = 10 m The diameter of the exhaust stack, D = 1 m The mass…

Q: n presence of an external flow when will the convective heat transfer be dominated by free…

A: Force and Free Convection ***As per our company policy we are supposed to do only 1 question if you…

Q: pnts) Chips of width L _ 15 mm on a side are mounted to a substrate that is installed in an…

A: Given data: The width of the chip (L) is =15mm =0.015m The area of the chip (A) is =LxL=0.015x0.015…

Q: A 6-mm-diameter electrical transmission line carries an electric current of 50 A and has a…

A: Given data as per question Current = 50 A Resistance = 0.002 Ω/m Velocity of air = 40 km/hr = 11.11…

Q: 5.0-cm-diameter cylinder is heated to a temperature of 200°C, and air at 30 °C forced across it at a…

Q: Air at 25 ° C blows over the hot steel plate whose surface temperature is maintained at 150 ° C. The…

A: Given, Air temperature, T∞=25 °C Steel plate surface temperature, Ts=150 °C Area of the plate,…

Q: Calculate the convection heat loss from the top and bottom of a flat 1 m square horizontal…

Q: Air at 25 ° C blows over the hot steel plate whose surface temperature is maintained at 250 ° C. The…

A: Given data as per question Temperature of air =250c Hot steel plate whose surface temperature is=…

Q: Example: In a production facility, large brass plates of 4 cm thickness that are initially at a…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

An electrical transmission line of 1.2-cm diameter carries a current of 200 amps and has a resistance of 310-4 ohm per meter of length. If the air around this line is at v, determine the surface temperature on a windy day, assuming a wind blows across the line at 33 km/h.
Write the comparison between forced and free convection in a non-isothermal system?
Differentiate between free and forced convection with examples.
A cylindrical bread at 145°C is cooling in air at 28°C. The loaf has 25 cm length and 7 cm radius. Calculate the total heat loss from the bread due to convection and radiation. (H = 10W/m2·K , eloaf = 0.76, κloaf = 0.121)
In presence of an external flow when will the convective heat transfer be dominated by free convection and not by the forced convection due to the external flow? Gr ≫ Re². Gr ≪ Re. Gr ≫ Re. Gr ≪ Re For ideal gases, the specific heat capacity at constant pressure, thermal conductivity, dynamic viscosity, and Prandtl number are independent of pressure. How will the ratio of thicknesses of velocity boundary layer and thermal boundary layer change if pressure is increased from 1 atm to 5 atm for the flow of an ideal gas over a flat plate? It will decrease by a factor of 5. It will remain the same. It will increase by a factor of 5. We need to know the actual fluid properties to tell.
Chips of width L _ 15 mm on a side are mounted to a substrate that is installed in an enclosurewhose walls and air are maintained at a temperature of Tsur=T∞=25oC. The chips have an emissivity ofε=0.60 and a maximum allowable temperature of Ts=85oC.(a) If heat is rejected from the chips by radiation and natural convection, what is the maximum operatingpower of each chip? The convection coefficient may be approximated as h=11.7 W/m2K.(b) If a fan is used to maintain airflow through the enclosure and heat transfer is by only forcedconvection, with h=250 W/m2K, what is the maximum operating power?
A cylindrical bread at 145°C is cooling in air at 28°C. The loaf has 25cm length and 7 cm radius. Calculate the total heat loss from the bread due to convection and radiation. (H = 10W/m2·K , eloaf = 0.76, κloaf = 0.121)
The emissivity of galvanized steel sheet, a common roofing material, is ε = 0.13 at temperatures around 300 K, while its absorptivity for solar irradiation is αS = 0.65. Would the neighborhood cat be comfortable walking on a roof constructed of the material on a day when GS = 750 W/m2, T∞ = 16°C, and h = 7 W/m2 · K? Assume the bottom surface of the steel is insulated.
You’ve experienced convection cooling if you’ve ever extended your hand out the window of a moving vehicle or into a flowing water stream. With the surface of your hand at a temperature of 30degC, determine the convection heat flux for (a) a vehicle speed of 47 km/h in air at 5degC with a convection coefficient of 40 W/m^2-K and (b) a velocity of 0.4 m/s in a water stream at10degC with a convection coefficient of 900 W/m^2-K. Which condition would feel colder? Add file
For the Convective Heat Transfer experiment, describe the difference in the procedures: Natural or FreeConvection and Forced convection. What makes the FORCED convection experiment as FORCED? Explain which, in your consideration should give the higher heat transfer rate? And REASON why? Did your results support your consideration?
The spherical, thin – walled metallic container is used to store liquid nitrogen at 77 K.The container has a diameter of 0.5 m and is covered with an evacuated insulationsystem composed of silica powder (k = 0.0017 W/m – K). The insulation is 25 mm thick,and its outer surface is exposed to ambient air at 300 K. The latent heat of vaporizationof liquid nitrogen is 2 x 105 J/kg. If the convection coefficient is 20 W/m2 – K over theouter surface. Determine the rate of liquid boil – off of nitrogen per hour. Showexpiration of critical radius of insulation.
The surface temperature of a 10 m long and a 6-cm-diameter horizontal hot water pipe is 73 ℃. Assume the air temperature to be 27 ℃. Determine the rate of heat loss from the pipe by free convection. Properties of Air are: k = 0.02735 W/m.℃, ν = 1.798*10^-5 m2/s, Pr = 0.7228, β= 1/Tf = 0.003096 K^-1.