A516.7 mg sample containing a mixture of K2SO, and (NH4)2S0, was dissolved in water and treated with BaCl2,precipitating the S042- as BaSO4. The resulting precipitate was isolated by filtration, rinsed free of impurities, and dried to a constant weight, yielding 863.5 mg of BaSO4. What is the %w/w K2SO4 in the sample?

A516.7 mg sample containing a mixture of K2SO, and (NH4)2S0, was dissolved in water and treated with BaCl2,precipitating the S042- as BaSO4. The resulting precipitate was isolated by filtration, rinsed free of impurities, and dried to a constant weight, yielding 863.5 mg of BaSO4. What is the %w/w K2SO4 in the sample?

Macroscale and Microscale Organic Experiments

7th Edition

ISBN:9781305577190

Author:Kenneth L. Williamson, Katherine M. Masters

Publisher:Kenneth L. Williamson, Katherine M. Masters

Chapter7: Extraction

Section: Chapter Questions

Problem 1Q

See similar textbooks

Similar questions

An impure sample of Na3PO3 weighing 0.1 g is dissolved in 35 mL of water. A solution containing 45 mL of 3% w/v HgCl2, 30 mL of 10% w/v sodium acetate, and 10 mL of glacial acetic acid is then prepared. After digesting, filtering, and rinsing the precipitate, 0.2857 g of Hg2Cl2 is obtained. Report the purity of the original sample as % w/w Na3PO3.
Suppose you have a soil that is made up of 10% organic matter with CEC = 200 cmol/kg, 40% kaolinitewith CEC = 10 cmol/kg, and 50% vermiculite with CEC = 100 cmol/kg.1- Calculate the overall CEC of the soil by taking a weighted average of the three soil components.2- What percentage of the overall CEC is contributed by the organic matter? How does that numbercompare to the 10% of the soil itself that is organic?
A stock solution of potassium permanganate (KMn04) was prepared by dissolving 13.0g KMn04 with DI in a 100ml volumetric flask and diluting to the calibration mark. Determine the molarity of the solution.
A sample containing iron is approximately 99.0% w/w Fe. Using ammonia, iron is precipitated as Fe (OH)3 which is ignited to Fe203. (a) What is the gravimetric factor for analyte Fe (AW=55.85 g/mol) and precipitate Fe203 (FW=159.69 g/mol)? (b) What mass of sample is needed to ensure that the Fe203 precipitate would weigh at least 1.00 g?
One litre of a saturated aqueous solution of Ag2SO4 (MW = 311.79 g mol- 1) at 25 °C is evaporated to dryness. 4.844 g of Ag2SO4 residue was produced. What is the solubility product (Ksp)?
Q1. Dissolved 0.273 grams of pure sodium oxalate (Na,C,O.) in distilled water and added sulfuric acid and titration the solution at 70 ° C by using 42.68 ml of KMNO, solution and has exceeded end point limits by using 1.46 ml of standard oxalic acid (H; C;O.) with 0.1024 N. Calculate the normlity of KMN0.. Note that the molecular weight of sodium oxalate (Na,C,O.) = 134 and its equivalent weight = 67
A salt solution (30% Na2CO3) weighing 1ton iscooled to 20C where the salt crystallizes asdecahydrate. What will be the crystal yield ifthe solubility is 21.5 kg anhydrous Na2CO3/100kg water? (assume that 3% of the totalsolution is lost by evaporation)
1. Sodium carbonate is recovered as decahydrate from 1000kg of 5% solution of sodium carbonate in water. If it is desired that 95% of Na2CO3 is to be recovered as decahydrate by cooling to 278 K, determine the following: a) the mass of water evaporated (b) the mass of crystals obtained (Na2CO3 ∙ 10H2O). The solubility of Na2CO3 in water at 278K is 9.0% (weight) 2. A copra batch contains 44% oil and is to be extracted with n-hexane. The extracted meal contains 0.07 kg of oil/kg oil free matter and the mass fraction of n-hexane in it is 0.05. The extract contains 49% n- hexane. If 10,000 kg of copra are to be processed, how many kg of n-hexane are required and the determine the amount of extract. 3. Absorption of sulphur dioxide is carried out in a packed tower. Gas containing 14.8% sulphur dioxide and the rest inert gases enters the tower while the leaving gases contains 1% sulphur dioxide. Water flows at the rate of 1m3/min. The tower handles 7380 m3/hr of gas at 303K and 1 bar. Find…
A 25.00mL wastewater sample was analyzed for its Mg2+ content using a standard gravimetric method. the sample was diluted to 3.00L and an 11.00mL aliquot was treated to precipitate magnesium as MgNH4PO4.6H2O using (NH4)2HPO4 as the precipitating agent. the precipitate was then filtered, washed, dried, and ignited resulting in a 0.1325mg Mg2P2O7 residue. How much Mg (in ppm) is present in the original sample
Method of separation/chemical reaction (with the brief process) of 3 KG's OF SODIUM BORATE AND 1.5 KG's HYDROCHLORIC ACID
A 0.512 g sample of a commercial phosphate detergent was ignited at a red heat to destroy the organic matter. The residue was taken up in hot HCl, which converted the P to H3PO4. The phosphate was precipitated as MgNH4PO4.6H2O by addition of Mg2+ followed by aqueous NH3. After being filtered and washed the precipitate was converted to Mg2P2O7 by ignition at 1000 0C and the residue weighed 0.1151g. (a) What is the Gravimetric Factor to convert Mg2P2O7 to P? (b) Calculate the percent P in the sample could you type it out please
You are supplied with the following: / Jy word voorsien van die volgende: NaCl(Mr= 58,443 g /mol) 2.5MTris-Cl, pH 8 solution /oplossing (1 Litre) EDTA,natriumsout(Mr= 380,2g/mol) 10% sodium dodecyl sulphate solution / natriumdodecyl sulfaat oplossing Proteïnase K solution / oplossing (50 mg dissolved / opgelos in 1 ml ddH2O) You need a digestion buffer consisting of the following: / Jy moet 'n verteringsbuffer op maak wat uit die volgende bestaan: 15m M NaCl 75 mM Tris-Cl,pH 8 16 mM EDTA,pH 8 0.8% sodium sulphate / natrium dodecyl sulfaat 0,75 mg/ml proteïnase K How will you prepare 500 ml of the digestion buffer? Show all your steps and calculations. Remember to explain exactly how you will make it up.