An alternating current generator with a frequency of 500 Hz and a peak voltage of 120 V is connected with a resistor of R = 15 N, an inductor of L = 20 mH and a capacitor of C = 42 µC in series. a) Find the impedance and phase angle of the circuit. b) Find the peak voltages across the R, the L and the C individually. c) Draw the corresponding phasor diagram.

An alternating current generator with a frequency of 500 Hz and a peak voltage of 120 V is connected with a resistor of R = 15 N, an inductor of L = 20 mH and a capacitor of C = 42 µC in series. a) Find the impedance and phase angle of the circuit. b) Find the peak voltages across the R, the L and the C individually. c) Draw the corresponding phasor diagram.

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter21: Resistive-capacitive Series Circuits

Section: Chapter Questions

Problem 2PP: Assume that the voltage drop across the resistor, ER, is 78 V; the voltage drop across the...

See similar textbooks

Similar questions

The circuit is connected to a 60-Hz line. The apparent power in the circuit is 29.985 VA, and the power factor is 62.5%. The resistor has a voltage drop of 14.993 V, the inductor has an inductive reactance of 60 , and the capacitor has a capacitive reactance of 45 . ETITZVA29.985PF62.5%ER14.993VIRRPELILXL60VARsLLECICXC45VARsCC
An industrial load consisting of a bank of induction motors consumes 50 kW at a power factor of 0.8 lagging from a 220-V,60-Hz, single-phase source. By placing a bank of capacitors in parallel with the load, the resultant power factor is to be raised to 0.95 lagging. Find the net capacitance of the capacitor bank in F that is required.
Assume that the voltage drop across the resistor, ER, is 78 V, that the voltage drop across the inductor, EL, is 104 V, and the circuit has a total impedance, Z, of 20 . The frequency of the AC voltage is 60 Hz. ETITZ20VAPFER78VIRRPEL104VILXLVARsLL
Three capacitors having capacitance values of 20F,40F, and 50F are connected in parallel to a 60 - Hz power line. An ammeter indicates a circuit current of 8.6 amperes. How much current is flowing through the 40F capacitor?
A source supplies power to the following three loads connected in parallel: (1) a lighting load drawing 10kW. (2) an induction motor drawing 10kVA at 0.90 power factor lagging, and (3) a synchronous motor operating at 10hp,85 effIciency and 0.95 power factor leading (1hp=0.746kW). Determine the real, reactive, and apparent power delivered by the source. Also, draw the source power triangle.
Convert the following instantaneous currents to phasors, using cos(t) as the reference. Give your answers in both rectangular and polar form. (a) i(t)=5002cos(t30) (b) i(t)=4sin(t+30) (c) i(t)=5cos(t15)+42sin(t+30)
Assume that the voltage drop across the resistor, ER, is 78 V; the voltage drop across the capacitor, EC, is 104 V; and the circuit has a total impedance, Z, of 20 . The frequency of the AC voltage is 60 Hz. Find the missing values. ET ER78V EC104V IT IR IC Z20 R XC VA P VARSC PF C
You are an electrician working in an industrial plant. A 30-hp three-phase induction motor has a current draw of 36 amperes at full load. The motor is connected to a 480-volt line. A three-phase wattmeter indicates a true power of 22 kW. Determine the power factor of the motor and the amount of capacitance needed to correct the power factor to 95. Also determine the minimum voltage rating of the capacitors. The capacitors are to be connected in wye.
A 120 V, 60 Hz power source is connected across an 800 ohm resistance in series with an unknown capacitor. The voltage drop across the resistor is 102 V. Find the, a.) current of the circuit b.) impedance of the circuit c.) Capacitive reactance d.) capacitance value.
A series circuit consists of resistance of 10 ohm, an inductance of 200/π mH and capacitance of 1000/π μF . Calculate (a) the current flowing in the circuit if supply voltage is 200 V, 50 Hz, (b) power factor of the circuit, (c) power drawn from the supply. Also draw the phasor diagram.
A Coil of Resistance RQ and Inductance L in mH in series with a C in µF Capacitor, is connected to a Voltage V, frequency-f Hz supply.Calculate the: (a) Current flowing, (b) (b) Phase Difference between the Supply Voltage and Current, (c) Voltage across the Coil, and (d)Voltage across the Capacitor (e) Draw the circuit diagram (f) Phasor diagram. (Refer XL sheet)
A coil impedance of 68Ω is connected and the circuit has capacitance of 0.002mF is connected to a 215V, 50 Hz supply. Calculate (a) the current flowing, (b) the phase difference between the supply voltage and current, (c) the voltage across the capacitance and (d) the voltage across the resistor. Draw the phasor diagram.