An arrangement of two pulleys, as shown in the figure, is used to lift a 84.8-kg crate a distance of 3.60 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical. P kg F where P = 84.8. What length of rope must be pulled to lift the crate 3.60 m?

An arrangement of two pulleys, as shown in the figure, is used to lift a 84.8-kg crate a distance of 3.60 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical. P kg F where P = 84.8. What length of rope must be pulled to lift the crate 3.60 m?

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.12.11P: A cylindrical brick chimney of height H weighs w = 825 lb/ft of height (see figure). The inner and...

See similar textbooks

Similar questions

A wood-stave penstock of 1.8 m diameter is wrapped with steel hoops and subjected to a fluid pressure of 380 KPa. If the allowable tension in the hoop is 42.4 kN, what is the maximum hoop spacing?
Q 244 What are the reaction forces on the latch an djoint in the gate below? And in case thefloodgate is reversed (concave)? *The gate is a cylinder room with length L = 5 m
A rectangular gate 5 m × 3 m is hinged at its base A and inclined at 60 degree to the horizontal as shown in the figure. To keep the gate in a stable position a counter weight (W) of 5000 kg is attached at the upper end of the gate. Find the depth of water at which the gate begins to fall. The weight of the gate is 2000 kg. Neglect the friction at the hinge and pulley
A 0.5-m diameter helium (Density of He = 0.18 kg/m3) balloon is attached by a rope to the bottom of a 10-m deep freshwater lake (Fig. 1). Given that the rope can sustain a maximum tensile force of 300 N, would it be able to secure the balloon? Please clearly illustrate your free-body diagram.
What are the reaction forces on the latch an djoint in the gate below? And in case thefloodgate is reversed (concave)? *The gate is a cylinder room with length L = 5 m
In the Figure below, the cover gate AB closesa circular opening 80 cm in diameter. The gate is held closed by a 200-kg mass as shown. Assume standard gravity at 20 °C. At what water level (h) will the gate be dislodged? Neglect the weight of the gate. Specific weight of water 9790 N/m3
In the following figure, the horizontal surface onwhich this block slides is frictionless. If the two forcesacting on it each have magnitude F = 30.0 N andM = 10.0 kg , what is the magnitude of the resultingacceleration of the block?
Essay From the figure below, discuss the internal effect of the external forces acting on the body.
A conductor with a specific gravity of 40.10-3 kg/m.mm2 was drawn between two poles, which are given in the figure and erected on a valley slope, with a tension of 10 kg/mm2. Accordingly, find the conductor stress at the high suspension point. Please answer in short i will like and dont reject please its urgent...
A commpon way of salvaging cannons from old wreacks is to attach an inflatable balloon filed with air. Assume that the cannon is a solid cylinder of iron which is 1.30m long with a radius 17.3cm. The density of iron is 7.87g/cm^3. a. If an air bag were filled twice the volume necessary, what will be the tension in the rope between the air bag and the cannon when the air bag reaches the surface and comes to rest? What volume of air bag wil be floating above the water surface?
Please answer in essay: From the figure below, discuss the internal effect of the external forces acting on the body.
The strength per meter of the longitudinal joint in the figure is 480 kN, whereas or the girth joint is 200 kN. Determine the maximum diameter of the cylindrical tank if the internal pressure is 1.5 MPa.