An ion with a charge of +3 is accelerated into the 1.79 m flight tube of a linear time-of-flight (TOF) mass spectrometer with an acceleration voltage of 20.0 kV. It takes the ion 74.4 us to reach the detector. What is the mass (m) of the ion?

An ion with a charge of +3 is accelerated into the 1.79 m flight tube of a linear time-of-flight (TOF) mass spectrometer with an acceleration voltage of 20.0 kV. It takes the ion 74.4 us to reach the detector. What is the mass (m) of the ion?

Principles of Instrumental Analysis

7th Edition

ISBN:9781305577213

Author:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Publisher:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Chapter27: Gas Chromatography

Section: Chapter Questions

Problem 27.5QAP

See similar textbooks

Related questions

Q: What accelerating voltage would be needed to analyze for N2+ (MW = 28.01) using a magnetic sector…

A: We know that mass spectroscopy mz=B2r22VWhere,m=mass of ion Z= charge on ionB= magnetic field…

Q: Br Br Br Br D E 100 m/z Intensity 39.0 5.6 MS-NU-2671 50.0 2.1 3.1 51.0 63.0 65.0 80 5.0 12.2 89.0…

A: Mass spectrum is the technique used in analytical chemistry for the separation of ions based on the…

Q: 5- If a high-frequency field is applied between flat plates of large area, 1 cm apart, find the rate…

A: The rate of ionizing collisions per electron is 2460 s-1 the value of the high-frequency ionization…

Q: (4) During an electrochemistry experiment, the following data was obtained. A graph of current…

A: “Since you have asked multiple questions, we will solve the first question for you. If you want any…

Q: Q15: If you want a high-resolution gamma detector for 1 MeV gammas, which of these is best? a) A…

A: In electromagnetic radiation, Gamma rays are the highest-energy form as compared to other forms of…

Q: The molar absorptivity of a compound at 500 nm wavelength is 252 M-1cm-1. Suppose one prepares a…

A: 1.) We would use formula of Absorbance. Note : As you have uploaded two questions, I'll…

Q: What is the Eºcell for the following? Au³+ (aq) + 3e- ----> Au(s) Cu+ (aq) + e ----> Cu+ (aq) E° =…

A: Given : Au3+(aq) + 3e- → Au(s) E° = 1.50 V Cu+(aq) + e- → Cu(s) E° = 0.52 V…

Q: (a) Describe the difference between the following and list any particular advantages possessed by…

A: Hello. Since the question contains multiple subparts the first three subparts are solved. In case…

Q: A solution containing 5.75 mg/100 mL of X (335 g/mol) has a transmittance of 41.6% in a 2.0 cm cell…

A: Given, A solution containing 5.75 mg/100 mL of X (335 g/mol) has a transmittance of 41.6% in a 2.0…

Q: Ex.1. Potassium chromate in the base solution shows the highest absorption at 372 nm, so the…

Q: Operating Wavelength : 462.8 nm Preparation of Standard Calibration Curve of [FeSCN]2+ Sample…

A: We are given with the following data:Sample NumberAbsorbanceFinal Concentration of…

Q: (3) Compound with10^3 x 6.74 molar absorption What concentration of the compound is required to form…

Q: A 0.035 g of KMnO4 was dissolved in 200 mL of distilled water. This solution had a transmittance of…

Q: The absorbance of a solution containing 5.0 x 10^-3 g/L of a solute in a 1.00 m cell is 1.00.…

A: 5.0 × 10-3 g/L of a solute solution in a 1.00 m cell has an absorbance of 1.00 . The molecular…

Q: The most abundant type of mammalian antibody circulating in the blood stream is IgG. A solution…

Q: Electrochemical detection is commonly used in combination capillary electrophoresis systems. This is…

A: Solution: With an increased rate of mass transport, a good hydrodrynamic conditions are important…

Q: 1. Fill up the necessary "lettered" cells based on the properties given. Units must be based on the…

A: Ideal gases: Those gases that obey the ideal gas equation are said to be ideal gases. It is a…

Q: The molar absorptivity of KMNO4 at 525 nm is 2.2 x 10° L mol"-cm'. What is the concentration of a…

A: In this equation, we want to determine the value of Concentration of KMnO4 How to calculate it, I…

Q: A calibration curve constructed from absorbance values of solutions containing a known concentration…

A: Given that : The best-fit line for the calibration curve constructed from absorbance values of…

Q: 3. 24Na is produced through the reaction 26Mg(d,a)4Na. A 0.2 mm thick magnesium foil is irradiated…

Q: A 7.21 x 10−5 M solution of potassium permanganate has a transmittance of 52.1% when measured in a…

A: Transmittance (T) is defined as the ratio of intensity of transmitted light (I) to the intensity of…

Q: Question 10 Which of the following statements is false about single beam absorption instruments? A…

A: The statements about single beam instruments are A) Test tube is used as sample holder. It is True…

Q: The absorbance of an unknown dye solution is measured to be 0.47 by a spectrometer. The linear…

A: The given expression for the linear equation for the spectrometr calibration is ; Y = 2156.5 X +…

Q: For a drift length of 200 cm, in a time-of-flight mass spectrometer, what is the difference in…

A: Given: The drift length is 200 cm. The charge of each ion is 1. The m/z value of ions is 66 and 43.…

Q: 7) A 25.0 ml sample containing Cu"gave an instrument reading of 23.6 units (corrected for a blank).…

A: Given volume in second solution= 0.5 ml Concentration of second solution=0.0287M Now no. Of milk…

Q: Q4 :[a] 5.00 x 10 M solution of an analyte is placed in a sample cell that has a path length of 1.00…

A: Given: The concentration (c) of the solution is 5.00 x 10-4 M The path length (b) is 1.00 cm The…

Q: A 7.25 x 10-5 M solution of potassium permanganate has a transmittance of 44.1% when measured in a…

A: Beer-Lambert law: Beer-Lambert's law stated that the loss of light intensity when it propagates in a…

Q: In the Specific Charge of Copper lons experiment, we used the following values for the current and…

A: The correct answer is Option B

Q: A solution containing 6.94x10^-8 M CrQ3 (Q=8 hydroxyquinolate ion) has a percent transmittance of…

A: The amount of light absorbed by a solution is named as absorbance (A) of the solution. The amount of…

Q: A 2993.72 m/z ion is accelerated into the 1.85 m flight tube of a linear time-of-flight mass…

A: From given datas With the formula of time 't' to reach detector, we are plugging all the given…

Q: The transmittance of a solution measured at 590 nm in a 1.5-cm cuvette was 76.2%. (a) What is the…

A: We have to predict the absorbance, absorptivity and the concentration.

Q: mirror in a laser. Because rhodium is so expensive, you wish to deposit only 4.5 mg on the surface…

Q: 3. Which property is measured in the following techniques? a) Potentiometry b) Amperometry c)…

A: (a) Potentiometry :…

Q: What is the absorbance of NaNO3 solution if it has transmittance 0.5 ? Select one: O a. 0.03 O b.…

Q: An ion with a charge of +3 is accelerated into the 1.64 m flight tube of a linear time-of-flight…

Q: A new electrochemical method relates concentration to current. The slope of the calibration curve is…

A: We are provided the replicate measurements and the slope of the calibration curve.

Q: The table shows a series of standard additions of Cu(II)to acidified tap water samples measured by…

A: The experiment involves the anodic stripping voltammetry at a platinum electrode.

Q: 33. What is the concentration of an analyte given that the percent transmittance is 70.3%, the path-…

A: Answer: According to Beer-Lambert law A=εbC Here: A=absorbanceb=path lengthC=concentrationε=molar…

Q: Calculate the expected absorbance value of a 0.12 M aqueous solution of a solution if the extinction…

Q: The lead level in a sample of contaminated soil was determined using AAS. A 2.0 g sample was…

A: This question is related to finding out the sensitivity of the method. Basically gradient or slope…

Q: What is the molar extinction coefficient if the pathlength of the sample cell is 5.6mm and the…

Q: 2- In a soil with Da = 1.30 g/cm3 at a depth of 15 cm, an absorbance value of 0.80 was obtained…

Q: A solution containing 5.54 ppm KMnO4 exhibits 72.5 %T in a 1.50-cm cell at 520 nm. A. Calculate…

Q: A 0.100 mol dm 3 aqueous solution of nickel(II) salt shows three absorbances, one of which has a…

Q: Operating Wavelength : 462.8 nm Preparation of Standard Calibration Curve of [FeSCN]2+ Sample…

A: According to Beer-Lambert's law, the absorbance of a solution is related to its concentration as:

Q: To determine the molar concentration of a metal ion in a solution of unknown concentration, a…

A: The graphical equation given is : y = 5.747 x + 0.013 absorbance of the final diluted solution =…

Q: 10. The concentration of haemoglobin in a blood sample was determined by spectrophotometry. A…

A: Given Absorbance concentration 0.069 1 0.113 2 0.201 4 0.377 8 0.730 16

Question

4= An ion with a charge of +3 is accelerated into the 1.79 m flight tube of a linear time-of-flight (TOF) mass spectrometer with an acceleration voltage of 20.0 kV. It takes the ion 74.4 us to reach the detector. What is the mass (m) of the ion? Gives

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, chemistry and related others by exploring similar questions and additional content below.

Similar questions

1. Suggest a reasonable combination of ionization source, mass analyzer, and detector for the following applications: a. The determination of calcium in milk. b. The identification of a virus with a mass of 30 kDa. c. The molar mass and structural identification of a newly developed steroid.
4 Determine the time in seconds required to sputter 50 nm of Si using a 10 µA/cm2 beam of 45 keV ions of (a) Ne, (b) Kr, and (c) Xe.
To determine the concentration of these analyte ions in a mixture, the mixture absorbance is analyzed in a cell with a pathlength of 1.00 cm at 396 nm and at 550 nm, yielding values of 0.109 and 0.0.183, respectively. What is the molar concentrations of X3+ in the sample? What are the molar concentrations of Y2+ in the sample?
Chemistry The most abundant type of mammalian antibody circulating in the blood stream is IgG. A solution prepared from 0.798 g of a particular IgG in 250 mL of water shows an absorbance of 0.578 at 275 nm in a 1.00 cm cell. If the molar absorptivity of the IgG is 6.49 × 104 M–1 cm–1 at 275 nm, what is the molar mass of the IgG? Present your numerical answer in kg·mol-1 to 3 significant figures .
To quantify the Cadmium content in a water sample, 5 aliquots of 10 mL were taken, adding to each one of them a volume of a standard solution of Cd (2 mg / mL); after the addition the final volume for all solutions was 50 mL. The absorbance reading was taken in an Atomic Absorption spectrophotometer, the data recorded were: Aliquot 1 2 3 4 5 Cd solution (mL) 0 1 2 3 4 Absorbance 0.163 0.240 0.319 0.402 0.478 Calculate the ppm of Cd.
For a drift length of 200 cm, in a time-of-flight mass spectrometer, what is the difference in arrival time between singly charged ions of m/z 66 and m/z 43 when the accelerating voltage is 3800V?
The ultraviolet spectrum of aspirin shows a secondary absorption band at 271 nm. If a solution of aspirin in water, with a concentration of 1×10-4 molar solution is examined at 271 nm, what will be the absorbance reading (ℇ = 1000) and what will be the intensity ratio, IO/I, respectively?
The standard curve was made by spectrophotographic analysis of equilibrated iron(III) thiocyanate solutions of known concentration. You are asked to analyze a Fe(SCN)2+Fe(SCN)2+ solution with an unknown concentration and an absorbance value of 0.4150.415 . The slope-intercept form of the equation of the line is ?=4558.4?+0.0147y=4558.4⁢x+0.0147 . The unknown was analyzed on the same instrument as the standard curve solutions at the same temperature. What is the Fe3+Fe3+ concentration of the unknown solution?
Calculate the specific absorbance ratio (SAR), where A620 = 0.166 and A280 = 0.557
Calculate the expected absorbance value of a 0.39 M aqueous solution of a solution if the extinction coefficient is ε = 2.95 dm3 mol–1 cm–1. The path length of the solution cell used for the measurement is 1.00 cm.
From experimental data, a plot of absorbance (in arbitrary units, a.u.) at a wavelength of 630 nm (on the y-axis) was plotted against the concentration (in mg/L) of Cu2+ (on the x-axis) in known solutions and a linear relationship was found with an equation of y = 7.22x+0.05. If an unknown solution had an absorbance of 1.20 a.u. at a wavelength of 630 nm, what is its concentration of Cu2+?
To prepare a standard solution of Mn2+, a 0.250 g sample of Mn is dissolved in 10 mL of concentrated HNO3 (measured with a graduated cylinder). The resulting solution is quantitatively transferred to a 100-mL volumetric flask and diluted to volume with distilled water. A 10-mL aliquot of the solution is pipeted into a 500-mL volumetric flask and diluted to volume.a. Express the concentration of Mn in mg/L, and estimate its uncertainty using a propagation of uncertainty.b. Can you improve the concentration’s uncertainty by using a pipet to measure the HNO3, instead of a graduated cylinder?