B) A 3-phase, 1500 kVA, 13.2 kV Y-connected synchronous generator, is supplying a real power of 120 kW and a reactive power of 900 KVAR to a 3-phase load. Identify the correct statement about this machine. (a) The field winding of the generator is under-excited (b) The field winding of the generator is over-excited (c) The induced voltage (EMF) in the generator is smaller than the terminal voltage (d) The generator is operating at leading power factor

B) A 3-phase, 1500 kVA, 13.2 kV Y-connected synchronous generator, is supplying a real power of 120 kW and a reactive power of 900 KVAR to a 3-phase load. Identify the correct statement about this machine. (a) The field winding of the generator is under-excited (b) The field winding of the generator is over-excited (c) The induced voltage (EMF) in the generator is smaller than the terminal voltage (d) The generator is operating at leading power factor

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.8P

See similar textbooks

Similar questions

Induction motors and welding transformers require magnetizing current, which causes a. lagging power factor. b. leading power factor. c. unity power factor. d. zero power factor.
A three-phase, 13.8 kV, 10 MVA, 0.8 PF-lagging, 60 Hz two-pole, Y-connected steam-turbine generator has a synchronous reactance of 12 Ω per phase and an armature resistance of 1.5 Ω per phase. This generator is operating in parallel with a large power system (innite bus). ONLY ANSWER PART D)a) What is the magnitude of internal voltage Ea at rated conditions?b) What is power angle δ of the generator at rated conditions?c) If the eld current is constant, what is the maximum active power possible out of this generator (taking into account Ra)? How much reserve power does this generator have at full load?d) At the absolute maximum active power possible, how much reactive power will this generator be supplying or consuming? Sketch the corresponding phasor diagram assuming I(f) is still unchanged.
2.2 A three-phase synchronous generator has a reactance of 1.5 p.. and negligible resistance. It supplies a rated current of 1.0 p.. at 1.0 p.u. terminal voltage to a lagging load of 0.9 power factor. Determine the rated excitation voltage in p.u. and the internal load angle. Construct the performance chart of the generator in 2.1 (above) assuming its rating is 450 MVA.
SYNCHRONOUS GENERATOR A 13.8 kV, 50-MVA, 0.9 p.f., 60 Hz, four pole, Y-connected synchronous generator has a synchronous reactance of 2.5 ohms, and an armature resistance of 0.2 ohm. At 60 Hz, its friction and windage losses are 1 MW, and its core losses are 1.5 MW. The field circuit has a dc voltage of 120 V, and the maximum field current is 5A. The current of the field circuit is adjustable over the range from 0 to 10 A. The OCC of this generator is shown in the figure.
A 3 phase, 11 kV, 60 Hz, 25 MVA, Y-connected cylindrical-rotor synchronous machine generator has Ra =0.45 Ω per phase and Xs =4.5 Ω per phase. The generator delivers the rated load at 11 kV and 0.85 lagging power factor. Determine the excitation voltage, Ef, for this operating condition.
A two-pole Y-connected synchronous generator has a voltage level of 2300 V, a capacity of 1000 kVA, a power factor of 0.8 lagging, a frequency of 50 Hz, a synchronous reactance of 1.1 Ω and an armature resistance of 0.15 Ω. At a frequency of 50 Hz, there are friction and windage losses of 24 kW, and core losses of 18 kW. The field circuit has a dc voltage of 200 V and a maximum Ifof 10 A. The resistance of the field circuit is adjusted over the range of 20 - 200 Ω. The open circuit characteristic curve (OCC) of the generator is shown in Figure below. (a) What field current is required for the value of VT to be 2300 V when the generator is operating at no load? (b) What is the internal voltage generated by the engine at the specified rated conditions (generator rating)? (c) What field current is required for the VT value to be 2300 V when the generator is operating under the rated (rating) condition? (d) How much power and torque can be supplied by the prime mover of the generator…
. A three phase 50MVA, 10kV cylindrical rotor generator has armature resistance of 0.1pu and synchronous reactance of 1.65pu is connected to an infinite bus. The generator delivers 2000A at 0.9 leading power factor to the infinite bus at 10kV. Determine the internal voltage E and the power angle of the generator. What would be the short circuit current assuming same level of excitation.
A 20 MVA , 24 - KV -PF- lagging, 50 Hz 4 pole, Delta-connected. -phase, steam turbine generator has a synchronous reactance of 10 per-phaseand a negligible armature resistance. The field current is adjusted for 28 - KV generator output line voltage at no load. This generator is connected to operate in parallel with a large power system (infinite bus). If the field current is unchanged. determine the absolute maximum output power of this generator.
Three-phase, 400 V (line voltage), 60 Hz, 6-pole, star-connected synchronous generator has a synchronous reactance of 1.2 ohms per phase. The armature current of the generator at full load is 64 A at a back power factor of 0.95. This generator has a rotational loss of 2 kW and a core loss of 1.6 kW at full load. The excitation current is adjusted so that the output voltage is 400V (line voltage) when the generator is running at no load. When the generator is loaded with 0.95 back power factor current at full load A) Find the rotating field speed of the generator? B) Find the mechanical speed of the generator? C) What will be the output voltage? D) Find the yield? E) Calculate the voltage regulation?
The synchronous reactance of the direct-axis and quadrature-axis of a three-phase,40-pole, 50 Hz, 13,8 kV, salient-pole synchronous generator is 2,38 Ω and 1,33 Ωrespectively. The resistance of the star-connected stator is negligible. The load angle ofthe machine is 30°e and the excitation is set to induce an emf of 167%. Sketch the phasordiagram and calculate:(a) current(b) power(c) reluctance torque(d) the maximum load angle(e) the maximum power developed
A 54-slot stator of a synchronous generator is wound for three-phase, 50-Hz, 6-pole applications. Determine (a) the number of coils in a phase group, (b) the slots per pole, (c) the slot span, (d) the coil span, and (e) the speed at which the rotor must be rotated.
A 760-kVA, 2300-V, three-phase, Y-connected, synchronous generator is operated at its rated speed to obtain its rated no-load voltage. Later, another test finds that the short-circuit phase current is 128A. The average resistance of each phase is 0.56 ohm. 1) Determine the synchronous reactance per phase. 2) Determine the voltage regulation when the generator delivers the rated load at its rated voltage and 0.75 PF lagging.