B. Cords are oop around s simall spaces eparating (wo eylinders whose total weight is 375 kg as shown in figure. These cords pass over frctonless pulley o weights of 85 kg and 130 kg. Determine the angle & and the normal Force N between the cylinder the smooth surface. ‘Weight = 375 kg, B. Cords are loop around a small spacer separating two cylinders whose totalweight is 375 kg as shown in figure. These cords pass over frictionlesspulley to weights of 85 kg and 180 kg. Determine the angle O and thenormal Force N between the cylinder and the smooth surface.Weight = 375 kg180 kg85 kg

Drawing FBD of system with all the forces: Here, N = Normal reaction T1 & T2 = Tensions in…

B. Cords are loop around a small spacer separating two cylinders whose total weight is 375 kg as shown in figure. These cords pass over frictionless pulley to weights of 85 kg and 180 kg. Determine the angle 0 and the normal Force N between the cylinder and the smooth surface. Weight = 375 kg 30 I80 kg 85 kg

B. Cords are loop around a small spacer separating two cylinders whose total weight is 375 kg as shown in figure. These cords pass over frictionless pulley to weights of 85 kg and 180 kg. Determine the angle 0 and the normal Force N between the cylinder and the smooth surface. Weight = 375 kg 30 I80 kg 85 kg

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.141RP: The thin-walled cylindrical can with a spherical dimple weighs 0.2 lb. Determine the force P...

See similar textbooks

Similar questions

The tongs shown are designed for lifting blocks of ice. If the weight of the ice block is W, find the horizontal force between the tongs and the ice block at C and D. Neglect the weights of the tongs.
Determine the horizontal force P that would keep the uniform 12-kg rectangular plate in the position shown.
Determine the force F required to pull up the 3.54m stopper from the drain of a sink if the depth of water is 10 in. Use =0.036lb/in.3 for water and neglect the weight of the chain.
The homogeneous plate of weight W is suspended from two cables. Determine the force P that is necessary to keep the plate in the position shown.
The uniform ladder of weight W is raised slowly by applying a vertical force P to the rope at A. Show that P is independent of the angle .
The cable AOB weighs 5.2 N/m. When the horizontal 30-N force is applied to the roller support at B, the sag in the cable is 5 m. Find the span L of the cable.
The homogeneous bar AB weighs 25 lb. Determine the magnitudes of the forces acting on the bar at A and B. Neglect friction.
The weight of the cylindrical tank is negligible in comparison to the weight of water it contains (water weighs 62.4lb/ft3). The coefficient of static friction between the tank and the horizontal surface is s. (a) Assuming a full tank, find the smallest force P required to tip the tank, and the smallest s that would allow tipping to take place. (b) If the force P = 200 lb initiates tipping, determine the depth of water in the tank.
Find the tension T in the cable when the 180-N force is applied to the pedal at E. Neglect friction and the weights of the parts.
The cylindrical water tank with R = 10 ft and H = 1.6 ft has thin steel walls of uniform thickness and weighs 18000 lb when empty. Determine the depth of the water h for which the center of gravity G of the tank plus water will be located at the surface of the water. For water, use =62.4lb/ft3.
Determine the smallest horizontal force P that would push the homogeneous cylinder of weight W over the curb. Neglect friction.
The tensions in the cable at points O and B are TO=1200N and TB=1800N. Determine the weight W of the cable.