Answered: Calculate the feed rate for a two-flute…

Engineering

Mechanical Engineering

Calculate the feed rate for a two-flute 1/ 4@in.-diameter carbide end mill to machine low-carbon steel.

Precision Machining Technology (MindTap Course List)

2nd Edition

ISBN:9781285444543

Author:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Publisher:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Chapter5: Turning

Section5.3: Machining Operations On The Lathe

Problem 5RQ: Calculate spindle RPM and machining time for cutting a 1.5" diameter 4" long at 225 SFPM using a...

See similar textbooks

Related questions

Q: A piece of Low carbon steel has (85mm) length machined by a lathe with cutting tool made of HSS,…

A: Given, Length of the specimen , L=85 mm. Depth of cut , d = 2 mm Feed , f = 0.2mm/rev. Cutting…

Q: During plain turning mild steel by a tool of geometry 0°, 0°, 7°, 8°, 12°, 90°, 0 (mm) at so= 0.35…

Q: A 4"x 8" cast steel plate is to be machined using a milling cutter with 8 inserts. The operation is…

A: Given dataD=8inchV=350sfpm=350×39.37=inch/minf=0.015inch/totthl3=0.18inchz=8 ***as per our company…

Q: Sample Problem 1 A man create a 5 inches thick hole with a 2" diameter on an aluminum flat bar.…

Q: In a slab milling operation , L_w = 200 mm table feed = 18 mm/min, diameter of cutter = 34 mm depth…

A: Given Data: The length of the slab is, Lw=200 mm. The feed rate of the table is, f=18 mm/min. The…

Q: A turning operation uses a 2/64 in nose radius cutting tool on a free machining steel with a feed…

A: Write the given values using suitable variables. Here r signifies nose radius, f signifies feed in…

Q: thickness is HW3.A block of steel has a length L-600mm and a width W-450mm. The Machined 10mm, once…

Q: to perform a rough cut single point facing operation in a lathe of 5 mm diameter cylinder workpiece…

A: Given Diameter = 5mm Feed rate = 0.5 mm/rev Depth of cut = 4.5mm Specific energy = 3Ws/mm3 To find…

Q: Q4. A hole with 40 mm diameter an 50mm depth is to be drilled in mild steel component. The cutting…

Q: Calculate the time required to machine a workpiece 170 mm long, 60 mm diameter to 165 mm long 50 mm…

A: Given:L1=170 mmL2=165 mmD1=60 mmD2=50 mmN=440 rpmf=0.3 mm/revd=2 mmApproach and overtravel=5 mm

Q: 1.10A O50 mild steel bar is being turned at 1.70 revis on a multi-tool center lathe having nine…

Q: Example 2 Calculate the r/min at which a drill press should be set to make threading for M12 x 1.75…

A: Given- material - cast iron M12 x 1.75 Diameter of workpiece (D)= 12 mm Feed = Pitch of Thread =…

Q: A single-point HSS tool with a 3/64 in nose radius is used in a shaping operation on a ductile steel…

Q: Blind hole 20 mm diameter, 60 mm deep are being drilled in steel stock, drilling spindle speed is…

Q: Mention the difference between Shaper machine and planer machine?

Q: An aluminum hollow shaft 200 mm outside diameter, 100 mm inside diameter and 500 mm length from…

A: Given data as per question The outside diameter of shaft =200 mm Inside diameter =100 mm Length of…

Q: A cylindrical work bar with 4.5 in diameter and 52 in length is chucked in an engine lathe and…

A: (a) The depth of cut is, d = 0.125 in. (b) The required feed is, f = 0.010 in/rev. (c) The cutting…

Q: A 12" x 4" block of soft aluminum alloy (u, = 2.5 hp.min/in³) is face milled at a depth of cut of…

A: Given Data: Depth of cut DC=18inch Length of block l=12 in Breadth of block b=4 in ut of aluminium…

Q: A 0.4-inch diameter bit is used in a vertical or vertical drill that operates at 300 rpm. If the…

Q: Example 3.18 A low carbon steel bar of 147 mm diameter with length of 630 mm is being turned with…

A: Given data as per the question A low carbon steel bar of 147 mm diameter with a length of 630 mm

Q: Identify and explain the method of milling process in which the stresses on the teeth is maximum at…

A: The milling process in which the stress on the teeth is maximum at the end of the cut is the up…

Q: b) Derive an expression for the "peak to valley" height Rt of a turned surface cut on a lathe with a…

A: As per Bartleby's policy in case of multiple questions I can only one. Please repost last one as…

Q: n a drilling operation under, a given condition, the tool life found to decrease from 20 mint to 5…

A: Given:Tool life, T1=20 minutefinal tool life, T2=5 minutedrill speed, N1=200 rpmfinal drill speed,…

Q: 17) A50-mm-dia endmill cuts 6061 aluminum with 30% tool engagement at a depth of 6 mm. The tool…

Q: A drilling operation is to be performed with a 12.7 mm diameter twist drill in a steelwork part. The…

A: givendiameter of twist drill d=12.7mmdepth of hole h=60mmpoint angle 2α=118ocutting speed…

Q: 1.10A O50 mild steel bar is being tumed at 1.70 revis on a multi-tool center lathe having nine…

Q: -) With a neat sketch differentiate between counter boring and counter sinking operation.

A: As per bartleby guidelines we are allowed to solve only one question if multiple questions are…

Q: List the methods of taper turning on lathe machine. Explain different taper turning methods. State…

A: list of methods of taper turning on lathe machine 1.Form tool method 2.Tailstock set…

Q: Aluminum bar with 100mm diameter and 500mm long is turned down to 88mm diameter, using two passes on…

Q: A 16mm Solid carbide tool with two teeth is used to machine Aluminium using the cutting speed of…

Q: 16- The outside diameter of a cylinder made of titanium alloy is to be turned. The starting diameter…

A: Givend=400mmf=0.35mm/revL=1100mmn=0.24C=450

Q: A shaper is operated at 120 cutting strokes per minute and is used to machine a work piece of 250 mm…

Q: Calculate the machining time required to reduce from 60mm diameter shaft to 50mm diameter, for a…

A: Initial diameter, Do= 60 mm Final diameter, Df= 50 mm Length, L= 1500 mm For rough cut, depth of…

Q: The cutting speed in in/min of a 12 mm drill operating at 600 rpm is nearly equal to

A: The cutting speed is 890.5 in/min.

Q: b) Derive an expression for the "peak to valley" height Rt of a turned surface cut on a lathe with a…

A: Ans a.) In general, we understand that surface quality is an evaluation of the surface imperfection…

Q: In a turning operation, the workpiece diameter is Dm=44.00 mm and the diameter after the operation…

A: Given:Dm=44 mmDc=22 mmV=15 m/minf=0.03 mm/rev

Q: 6. Compute for the necessary stroke per minute on 8 inches copper if it has 100 fpm as its cutting…

Q: In turning of stales steel alloy, 1100 mm length and 400 mm diameter, the Feed was 0.35 mm/rev, and…

Concept explainers

Forming and Shaping

Metal forming is a category of metalworking process through which the material can be given the desired shape and size by subjecting it to plastic deformation, where the component undergoes bulk deformation process upon application of loads. Unlike the shearing and machining process, the material does not undergo up to a failure point as indicated in the stress-strain curve. Hence, the stresses induced during the forming process are greater than yield strength but less than the failure strength of the material. The process does not lead to the loss of material, so it can be said to be an economical process. During forming, the material is subjected to tensile forces, compressive forces, bending, and shearing loading conditions. The material should possess the property of ductility to undergo the forming process.

Question

Calculate the feed rate for a two-flute 1/ 4@in.-diameter carbide end mill to machine low-carbon steel.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Machining time required reduce a mild steel rod of diameter 60mm, initial length (L) 125mm to final length (L1) 120mm to 58 mm by turning a carbide insert. If the approach length and over run length are 5 mm and 1 mm respectively, take Cutting speed as 20 m/min and feed is =0.2 mm/rev, and the depth of cut is 0.5mm
In a slab milling operation , L_w = 200 mm table feed = 18 mm/min, diameter of cutter = 34 mm depth of cut = 2 mm. Considering approach and overtravel to be same. The milling time in min will be?
Calculate spindle RPM and machining time for cutting a 1.5" diameter 4" long at 225 SFPM using a feed rate of 0.004".
If the outside of a 6"-diameter disk is to be milled using a rotary table and a 3/4" diameter endmill, what is the total amount the milling machine axis must be offset from the center of the rotary table?
Explain how the size of an upright drill press is determined.
Briefly describe the process to prepare for internal contour sawing on the vertical band saw.
A single-point HSS tool with a 3/64 in nose radius isused in a shaping operation on a ductile steel workpart.The cutting speed is 120 ft/min. The feed is 0.014 in/pass and depth of cut is 0.135 in. Determine the surfaceroughness for this operation.
(j) In a turning operation on stainless steel with hardness = 200 HB, the cutting speed = 250 m/min, feed = 0.3 mm/rev, and depth of cut = 8 mm. How much power will the lathe draw in performing this operation if its mechanical efficiency = 95%. Use Table below to obtain the appropriate specific energy value.
Figure and table given below shows the design details of a taper turning operation with a cutting speed of 22 m/ minute, feed 0.2 mm/ revolution; Depth of cut of 0.5 mm. (c) Time for n passes to complete taper turning in minutes .
Find the machining time required to turn a mild steel rod from 65mm to 58 mm over a length of 100 mm by using a carbide insert. If the approach length and over run length is taken as 5 mm, Cutting speed as 20 m/min and feed is =0.2 mm/rev, and the depth of cut is 0.5mm
Figure and table given below shows the design details of a taper turning operation with a cutting speed of 22 m/ minute, feed 0.2 mm/ revolution; Depth of cut of 0.5 mm. Using the given data find the following. (d) Time for single pass "Tsingle" in minutes
A turning operation uses a 2/64 in nose radius cuttingtool on a free machining steel with a feed rate = 0.010in/rev and a cutting speed of 300 ft/min. Determine thesurface roughness for this cut.