fluid mechanics A pipe 200 (mm) diameter carries Oil at a flow rate of 0.030 (m³/s). The pipe diameter reduces from 200 (mm) to 150 (mm). Point 1 is located at the beginning of the pipe and point 2 is located at the end of the pipe. Elevation of point 1 is 165 (m) lower than elevation of point 2. Water pressure at point 2 is atmospheric pressure. Water flow in the pipe ascending from point 1 to point 2. Total head losses of flow in the pipe equals to 15 (m). 1- Find the value of pressure head of Oil at point 1. 2- Draw the H.G.L. of flow in the pipe.

fluid mechanics A pipe 200 (mm) diameter carries Oil at a flow rate of 0.030 (m³/s). The pipe diameter reduces from 200 (mm) to 150 (mm). Point 1 is located at the beginning of the pipe and point 2 is located at the end of the pipe. Elevation of point 1 is 165 (m) lower than elevation of point 2. Water pressure at point 2 is atmospheric pressure. Water flow in the pipe ascending from point 1 to point 2. Total head losses of flow in the pipe equals to 15 (m). 1- Find the value of pressure head of Oil at point 1. 2- Draw the H.G.L. of flow in the pipe.

Name: fluid mechanicsA pipe 200 (mm) diameter carries Oil at aflow rate of
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: fluid mechanicsA pipe 200 (mm) diameter carries Oil at aflow rate of 0.030 (m³/s). The pipediameter reduces from 200 (mm) to 150(mm). Point 1 is located at the beginningof the pipe and point 2 is located at the endof the pipe. Elevation of point 1 i

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The pressure drop in a venturi meter (Fig. P3.128) varies onlywith the fluid density, pipe approach velocity, and diameterratio of the meter. A model venturi meter tested in water at20 ° C shows a 5-kPa drop when the approach velocity is 4 m/s.A geometrically similar prototype meter is used to measuregasoline at 20 °C and a flow rate of 9 m 3 /min. If the prototypepressure gage is most accurate at 15 kPa, what should theupstream pipe diameter be?
In the gap between the two plates, the lubricant flows in one direction (x) by the pressure gradient. Lubricants are incompressible Newtonian fluids, flows are laminates, and terminal effects are ignored. Find the maximum flow rate [m/s] when the pressure difference (△P/L) per unit length is 25000 Pa/m.Data: clearance between plates (B) = 6 mm, lubricant viscosity (μ) = 25 cP (1cP = 10-3 Pa·s), lubricant density (=) = 0.88 g/cm3 Please.. explain more easy
In a chemistry plant, through a horizontal smooth pipeline with a diameter of 0,3 m, a fluid with density and viscosity of 769 kg/m3 and 0,0007 Pa-s, respectively is flowing with a flow rate of 0,009 m3/s. Disregarding the pipe entrance effects and treating flow being steady, uniform and incompressible; a) Find the magnitude of mean velocity (in m/s). (Please use only 3 decimal digits.) b) Find Reynolds number. (Please do not use any decimal digit.) c) Find the magnitude of friction factor. (Please use 4 decimal digits.)
2. A fan discharges 265 cu.m/min of air through a duct of 92 cm in diameter against a static pressure of 0.022 m of water. The fluid density is 995 kg/cu.m., the air temperature is 29°C and the barometric pressure reading is 730 mm Hg. If the power input to the fan is measured 3.5 hp, what are the total and static fan efficiencies?
At low velocities (laminar flow), the volume flow Q through a small-bore tube is a function only of the tube radius R, the fluid viscosity ?܇, and the pressure drop per unit tube length dp/dx. Using the Buckingham pi theorem, find an appropriate dimensionless relationship. Make use of Table 1
Air flows through a duct at 2,700 cubic feet per minute (CFM). After several feet and a few vents, the air-flow decreases to 1,890 CFM. What is the percent drop that has occurred? (Simplify your answer completely.)
An aqueduct is required to supply water to the community.Data: Families = 12 Average members per family = 3 people Breakfast, lunch and dinner = 15 total liters / family Showers = 10lt / person, one daily shower Kitchen wash = 13lts / day Total distance of the pipeline to the storage tank = 1200 meters Total height H from the pump point to delivery to the tank = 70 meters Determine: Estimation of the total volume of the recommended tank, an autonomy of at leas 2 days of storage. It is required to propose a pump that allows at least filling the tank between 5 to 12 hours operation, it must include details of the pump, as well as its curve Image: schematic detail of the proposed system
When a person ice skates, the surface of the ice actuallymelts beneath the blades, so that he or she skates on a thinsheet of water between the blade and the ice.( a ) Find an expression for total friction force on the bottomof the blade as a function of skater velocity V , bladelength L , water thickness (between the blade and theice) h , water viscosity μ , and blade width W .( b ) Suppose an ice skater of total mass m is skatingalong at a constant speed of V 0 when she suddenlystands stiff with her skates pointed directly forward,allowing herself to coast to a stop. Neglecting frictiondue to air resistance, how far will she travelbefore she comes to a stop? (Remember, she iscoasting on two skate blades.) Give your answer forthe total distance traveled, x , as a function of V 0 , m ,L , h , μ , and W .( c ) Find x for the case where V 0 = 4.0 m/s, m = 100 kg,L = 30 cm, W = 5.0 mm, and h = 0.10 mm. Do youthink our assumption of negligible air resistance is agood one?
A fire hose has an inside diameter of 6.5 cm. Suppose such a hose carries a water flow of 40.5 L/s starting at a gauge pressure of 1.68 × 106 N/m2 . The hose discharges through a nozzle having an inside diameter of 3.4 cm. Take the viscosity of water to be 1.005 × 10-3 (N/m2)⋅s dh = 6.5 cmdn = 3.4 cmP = 1.68 × 106 N/m2Q = 40.5 L/s a. the Reynolds number, NR, for flow in the fire hose to show that the flow must be turbulent, with NR≥ 3000. b. Calculate the Reynolds number, NR, for flow in the fire hose and nozzle to show that the flow must be turbulent, with NR≥ 3000.
Please solve it correctly,Urgent. Question: The discharge pressure of a water pump is 9, 000 kPa. The temperature is 150 deg deg C and density is 917 kg/m3. What is the equivalent pump head in meters? A. 11.005 m B. 1,000.5 m C. 1,050.5m D. 1, 100.5 m
Water flows through a rubber hose 2 cm in diameter at a velocity of 4 m/s. (a) What must be the diameter of the nozzle in order that the water emerge at 16 m/s? (b) What is the rate of flow in cu.m per minute?
Find the air horsepower of an industrial fan that delivers 40m3/s of air through a 700mm x 1000mm duct if static pressure is 150mm of water gage and air density is 1.18kg/m3 Answer: 182.2