Forty percent of the electrical input to a motor driven pump is converted into a hydraulic jet 0.013 m in diameter, for the purposes of washing down ashes. Find the jet velocity in m/s. The motor has a 3-phase, 220 V, 7.5 amp. rating. Power factor 85%. 53.214. m/s 52.214. m/s O 51.214. m/s 50.214. m/s

Forty percent of the electrical input to a motor driven pump is converted into a hydraulic jet 0.013 m in diameter, for the purposes of washing down ashes. Find the jet velocity in m/s. The motor has a 3-phase, 220 V, 7.5 amp. rating. Power factor 85%. 53.214. m/s 52.214. m/s O 51.214. m/s 50.214. m/s

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A rotameter has a stainless steel float [ ρ=8500 kg/m^3] and takes in 5 m3 /min of water. Using the same rotameter setup, what vol flow rate of a fluid whose density is 1200 kg/m^3 is expected?
Discuss Brayton and Rankine cycles
A Kaplan turbine has the following specifications: H =25 ft., N=400 rpm; power = 650 hp. If the efficiency of the unit is 90%, estimate (a) the flow rate, (b) approxi-mate diameter of the runner, (c) turbine setting to avoid cavitation if the location is at sea level, and (d) turbine setting to avoid cavitation if the location of the unitis at an elevation of 5000 ft. The local temperature is 60°F.Ans: (a) Q=254 cfs; (c) Hs=5.8 ft.; (d) 0.12 ft.
In a steam turbine system, suppose the value of ∆mH is constant (meaning, inlet and outlet conditions are maintained). From the energy balance equation, Qnet + Wnet = ∆mH + ∆KE + ∆PE or −0.1209 kW − 70 kW = ??̇? + 8.75 kW − 0.0068kW 1. What will happen to Wnet if there was no increase in kinetic energy, will the magnitude of Wnet increase or decrease? What should be the sign of potential energy so that Wnet will increase in magnitude?2. For a turbine system, what should happen to Qnet, ∆KE, and ∆PE to maximize the work done by the turbine? Which factor is the most significant?
Assess the capabilities of a hydroelectric power plant from the following field data: Estimated water flow rate, 40 m3/s River inlet at 1 atm, 10 C Discharge at 1 atm, 10.2 C, 200 m below the intake
a. Given the static head of 28.91 m, and static pressure head of 3.15 cm WC. What is the normal pressure, Pn? b. What is the Static efficiency of the fan if the air flow rate is equal to 3.8 5m /sec, total head of 68.72 m, velocity head of 30.86 m, mechanical efficiency and power are 39.12% and 35.72 KW at 30.69°C, respectively. c. Solve for the area at entrance of the fan blade, if the it has a 346mm diameter, flow of air is equal to 23.328 m/se and flow rate of 3.05 m³ /second.
A turbine runs at 150 rpm, discharges 5.7 m3/s and develops 1200 bkw under a net head of 25 m. If the same turbine is operated under a new net head of Hn = 40 m. What will be the brake power, in bkw?
The wind turbine gives the following data: Blade length, l = 39 m, Wind speed, V= 12.4 m/s, Air density, ρ = 1.23 kg/m3 , Power Coefficient, Cp = 0.39, Calculate the power available in the wind.
A piston PDP has a 5-in diameter and a 2-in stroke andoperates at 750 r/min with 92 percent volumetric effi ciency.(a) What is its delivery, in gal/min? (b) If the pump deliversSAE 10W oil at 20°C against a head of 50 ft, what horsepoweris required when the overall effi ciency is 84 percent?
The following particular refer to a two row velocity compounded Impulse steam turbine (wheel). Steam velocity at Nozzle exit-600 m/sec, Nozzle angle - 16°, Mean Blade velocity = 120 m/sec. Exit angles; first row of moving blades - 18° Fixed guide blades = 22⁰ Second row of moving blades 36° Steam flow rate=5kg/sec. Blade friction coefficient=0.85 Determine (1) Tangential thrust
HANDWRITTEN AND FINAL ANSWER MUST BE IN ENGLISH UNITS. Show solution. An experimental gas turbine engine is under development to increase its mechanical efficiency. It has a turbine efficiency of 95% and compressor efficiency of 85%. The following parameters are provided: P1 = 550 kPa, T1 = 25 deg C, rp = 5.5, T3 = 1450 deg C, Wnet = 5500 kW. Compute for the (a) flow rate and (b) mean effective pressure. Consider Ethane as your working fluid.
In a turbine system, states A and B are homologous. If the net head ratio HA/HB =16 , volume flow rate ratio VA˙/VB˙=9. What is the diameter ratio DA/DB ? a) 3/2 b) 6 c) 12 d) 2/3