ILL 20 mm) 80 mm 20 mm 120 mm A square box beam is made of two 20x80-mm planks and two 20x120-mm planks nailed together as shown. Knowing that the spacing between the nails is s= 30 mm and that the vertical shear in the beam is V=1200 N, determine (a) the shearing force in each nail, (b) the maximum shearing stress in the beam.

ILL 20 mm) 80 mm 20 mm 120 mm A square box beam is made of two 20x80-mm planks and two 20x120-mm planks nailed together as shown. Knowing that the spacing between the nails is s= 30 mm and that the vertical shear in the beam is V=1200 N, determine (a) the shearing force in each nail, (b) the maximum shearing stress in the beam.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Three boards, each of 1.5 x3.5-in. rectangular cross section, are nailed together to form a beam that is subjected to a vertical shear of 250 lb. Knowing that the spacing between each pair of nails is 2.5 in., determine the shearing force in each nail.
A beam consists of three planks connected by steel bolts with a lon-gitudinal spacing of 225 mm. Knowing that the shear in the beam is vertical and equal to 6 kN and that the allowable average shearing stress in each bolt is 60 MPa, determine the smallest permissible bolt diameter that can be used
Three 1 x 18-in. steel plates are bolted to four L6 x 6 x 1 angles to form a beam with the cross section shown. The bolts have a 78-in. diameter and are spaced longitudinally every 5 in. Knowing that the allowable average shearing stress in the bolts is 12 ksi, determine the largest permissible vertical shear in the beam. (Given: Ix= 6123 in4.)
A beam consists of five planks of 1.5 x 6-in. cross section connected by steel bolts with a longitudinal spacing of 9 in. Knowing that the shear in the beam is vertical and equal to 2000 lb and that the allow-able average shearing stress in each bolt is 7500 psi, determine the smallest permissible bolt diameter that can be used.
A square box beam is made of two 3434 × 3.5-in. planks and two 3434 × 5-in. planks nailed together as shown. Know that the spacing between the nails is s = 1.25 in. and that the vertical shear in the beam is V = 260 lb. Determine the maximum shearing stress in the beam.
A composite beam is made by attaching the timber and steel portions shown with bolts of 12-mm diameter spaced longitudinally every 200 mm. The modulus of elasticity is 10 GPa for the wood and 200 GPa for the steel. For a vertical shear of 4 kN, determine (a) the average shearing stress in the bolts, (b) the shearing stress at the center of the cross section.
An extruded beam has the cross section shown and a uniform wall thickness of 0.20 in. Knowing that a given vertical shear V causes a maximum shearing stress τ= 9 ksi, determine the shearing stress at the four points indicated. assuming that the beam is subjected to a horizontal shear V
The built-up beam in Figure 2 is connected by nails. Knowing that the spacing between the nails is s1 mm and that the vertical shear in the beam is V1 kN, determine the shearing force in each nail the maximum shearing stress in the beam v1=9.2 kN S1=74 mm L1=54.8 mm L2=48 mm
Two 20 × 100-mm and two 20 × 180-mm boards are glued together as shown to form a 120 × 200-mm box beam. Know that the beam is subjected to a vertical shear of 3.625 kN. Determine the average shearing stress in the glued joint at B.
For the wide-flange beam with the loading shown, determine the largest load P that can be applied, knowing that the maximum normal stress is 160 MPa and the largest shearing stress is 100 MPa. W360 x 122 B
The American Standard rolled-steel beam shown has been reinforced by attaching to it two 16 x 200-mm plates, using 18-mm-diameter bolts spaced longitudinally every 120 mm. Knowing that the average allowable shearing stress in the bolts is 90 MPa, determine the largest permissible vertical shearing force.
A timber beam, 80mm wide by 60mm high, is subjected to a vertical shear load of V = 40KN. Determine the shearing stress developed at layers 20mm apart from top to bottom of the section.