In the image on the right, there is a red gear G1 on theleft with a radius of r1 = 2.81cm. Gear G1 is lockedto the green gear G2 with a radius of r2 = 0.734cm.Gear G2 then shares the same axle as the blue circularsaw G3, which has a radius of r3known to make a full rotation every T = 0.836s. Usingat least 6 significant digits in your calculations,compute the following:V3!12.8cm. Gear G1 isW1a) The angular speed wi of gear G1. Rememberthat angular speed is measured in radians perT3r2unit time.G2b) The rim speed vi of gear G1. Since gears G1and G2 are locked together, the rim speed of G2is also v1.G1G3c) The angular speed w2 of gear G2. Since gearG2 and saw G3 share the same axle, the angularspeed of G3 is also w2.d) The rim speed v3 of saw G3.

Answered: Image /qna-images/answer/916cc295-afda-4c72-945f-249bb637112c.jpg

In the image on the right, there is a red gear G1 on the left with a radius of r1 = 2.81cm. Gear G1 is locked to the green gear G2 with a radius of r2 = 0.734cm. Gear G2 then shares the same axle as the blue circular saw G3, which has a radius of r3 = 12.8cm. Gear G1 is known to make a full rotation every T = 0.836s. Using at least 6 significant digits in your calculations, compute the following: a) The angular speed wi of gear G1. Remember that angular speed is measured in radians per Wi unit time. b) The rim speed vi of gear G1. Since gears G1 and G2 are locked together, the rim speed of G2 is also v1. G2 c) The angular speed w2 of gear G2. Since gear G2 and saw G3 share the same axle, the angular speed of G3 is also w2. G3 d) The rim speed v3 of saw G3.

In the image on the right, there is a red gear G1 on the left with a radius of r1 = 2.81cm. Gear G1 is locked to the green gear G2 with a radius of r2 = 0.734cm. Gear G2 then shares the same axle as the blue circular saw G3, which has a radius of r3 = 12.8cm. Gear G1 is known to make a full rotation every T = 0.836s. Using at least 6 significant digits in your calculations, compute the following: a) The angular speed wi of gear G1. Remember that angular speed is measured in radians per Wi unit time. b) The rim speed vi of gear G1. Since gears G1 and G2 are locked together, the rim speed of G2 is also v1. G2 c) The angular speed w2 of gear G2. Since gear G2 and saw G3 share the same axle, the angular speed of G3 is also w2. G3 d) The rim speed v3 of saw G3.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.73P

See similar textbooks

Similar questions

At the top A of the vehicle moving along line AC in the figureIts speed is 30 m / sec and its weight is 9 kN.Tool radius of curvature 40The reaction force to the tires when reaching point B, which is m,and so that the tires do not separate from the asphalt when it reaches point CWhat should be the radius of curvature of point C? (hA = 6 m andhC = 9 m)
find the angle of braking for a circular track of radius 600m as to be suitable for driving a car with a maximum speed of 180 km/hr (g=9.8m/s
Link BC (of length 0.47 m) is pin connected at the fixed point C and makes an angleof ⍬ = 51° with the vertical. This link is connected to the vertical link AB (of length0.3 m) and point A is also the axle of a wheel of negligible size that is moving alonga circular track of radius r =2.3 m. If the speed of A is constant and VA = (-2.59)im/s, which one of the following statements is correct? (In the followingstatements, wAB and wBC denote ⍵AB and ⍵BC respectively, where both are definedpositive in the k-direction and given in rad/s, and A denotes the magnitude of pointA's acceleration in m/s2) 1) wAB=0; wBC=0; aA=02) wAB=6,99; wBC=-7.09; aA=03) wAB=8.63; wBC=0; aA=04) wAB=8.63; wBC=0; aA >0 5) wAB=6.99; wBC=-7.09, aA>0
Two gears (A and B) are in mesh (they are interlocked) and both spin around their centers of gravity. Gear A has a radius of .8 ft and is experinceing a 10 ft-lb CW moment Gear B has a radius of 1.2 ft If gear A is initially moving at 60 rpm CW, determine how long it will take for gear B to be rotating at 300 rpm CCW
The turning-moment diagram for an engine consists of two isosceles triangles each with a height equivalent to a torque of 16kNm. The bases of the triangles lie between ? = 0 ? and ? = 180? , and ? = 180? and ? = 360? Sketch the turning-moment diagram and add the mean torque line. If the engine is to rotate with a mean speed of 130 rpm, calculate the following: the power developed the mass of the flywheel having a radius of gyration 1.1m to restrict the fluctuation of speed to +1.5% of the mean speed. Demonstrate which would be most effective to reduce the fluctuation of speed, a change in diameter of or a change in mass of the flywheel.
A torque T = 0.30 N-m is applied to a bevel gear B. Bevel gear D meshes with gear B and drives pump A. Gear B has a radius of gyration of 150 mm and a weight of 50 N, whereas gear D and the im- peller of pump A have a combined radius of gy- ration of 50 mm and a weight of 100 N. Find how many revolutions of gear B are needed to get the pump up to 200 rpm from rest. What is the power output of the pump at this speed if it is 90% efficient.
Two spur wheels with involute teeth gear together externally. The pitch circle diameters are 120 mm and 300 mm and the smaller wheel has 19 teeth. The pressure angle is 20o and the addendum is 0,3 of the circular pitch. Determine 1.1 The length of the arc of approach if the smaller wheel is the driver, and 1.2 The maximum velocity of sliding between the teeth when the driver rotates at 200 r/min
Solve the force and its direction with Fx=130N, Fy=115N
How far from the axis of A will the center of the roller R be located if the angular speed of shaft B is three times as that of A?
The turning-moment diagram for an engine consists of two isosceles triangles each with a height equivalent to a torque of 16kNm. The bases of the triangles lie between ? = 0 ? and ? = 180 , and ? = 180? and ? = 360? respectively. If the engine is to rotate with a mean speed of 130 rpm, calculate the following: the mass of the flywheel having a radius of gyration 1.1m to restrict the fluctuation of speed to +1.5% of the mean speed.
The triangular plate is fixed at its base, and A is given a horizontal displacement of Δs′= 4 mm. Suppose that L=800 mm.
For the system of gears below, the double gear is free to move along the horizontal. Determine the angular velocity of the double gear and the velocity of its center C. Use RELATIVE MOTION ANALYSIS AS A SOLUTION