NQ1) A closed-end pressure vessel (d, = 300mm & t 10mm) is subjected to an internal pressure of 6MPA. Find the maximum torque which can also be applied if the normal stress in the walls of the vessel is limited to 100MPA, then determine the planes of maximum stresses.

NQ1) A closed-end pressure vessel (d, = 300mm & t 10mm) is subjected to an internal pressure of 6MPA. Find the maximum torque which can also be applied if the normal stress in the walls of the vessel is limited to 100MPA, then determine the planes of maximum stresses.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.3.9P: A cylinder filled with oil is under pressure from a piston, as shown in the figure. The diameter d...

See similar textbooks

Related questions

Q: A mild steel shaft transmits 22 kW at 550 r.p.m. It carries a central load of 900N and is simply…

A: Given Data Power, P=22KW Shaft rpm, N=550 rpm Load, P=900N Length of the beam, L=2.5m Allowable…

Q: Q2: rotor blade in a mixer. As a consequences, the shaft is suffered a compressive load of P =122 KN…

A: P = 122 KN T = 3.4 KNm Yield stress = 480 Mpa Diameter = 50 mm

Q: Find the shear stress in 10 mm diameter shaft subjected to 2 kW power transmission at 100 rpm.

A: Given data:

Q: 2- Compare the weight of equal lengths of hollow and solid shafts to transmit a torque T for the…

Q: A pressurized pipe with an outside diameter of 14.35 in. and a wall thickness of 0.25 in. is…

Q: A line shaft rotating at 320 rpm is to transmit 35 kW power. The allowable shear stress for the…

A: Given Data⇒ Line shaft rotating at (N)=320 rpm Power transmitted (P)=35 KW Allowable shear stress…

Q: The drive shaft for a truck (outer diameter 60 mm and inner diameter 40 mm) is running at 42 Hz. If…

Q: 4 kN m 1.5 kN m Aluminum Steel Bronze B 100 mm 75 mm 3m 2 m 1.5 m- C FIG. P3.12 FIG. P3.11 3.12 The…

A: For solution refer below images.

Q: The cylinder for a hydraulic press has an inside diameter of 300 mm and an outside radius of 260 mm.…

A: Inside diameter = 300 mm Inside radius = 150 mm outside radius = 260 mm internal pressure = 80 Mpa

Q: A mild steel shaft transmits 21 kW at 250 r.p.m. It carries a central load of 900 N and is simply…

A: Given Data Power transmit, P=21KW N=250 rpm Load, P=900N Allowable shear stress, T=42MPa

Q: Two shafts are being connected by a coupling which is held together by four 3/4-in diameter bolts.…

Q: A point On a free surface of a machine point (E = 214Gpa, G= 83Gpa) the stress state is shown on the…

A: GIVEN :- E = 214Gpa G= 83Gpa σy=15 MPaσx=-30 Mpaζxy=25 MPa

Q: 2- If (maximum shear stress) Tmax=800 KPa, calculate L. 24KN A is ido mm 24KN

A: Given data: Maximum sear stress τmax=800 kPa Need to determine the value of L.

Q: Q2. A mild steel shaft of 50 mm diameter is subjected to a bending moment of 1200 N-m and a torque…

Q: A2000-in diameter solid shaft is subjected to an adal force of P=560 Ib, a horizontal shear force of…

Q: A water tank, 6 m in diameter, is made from steel plates that are 13mm thick. Find the maximum…

Q: A pipe has an outside diameter of 0.8 inches and inside diameter of 0.19 inches. A force of 105 lbs…

A: Given Outside diameter, d2 = 0.8 in Inside diameter, d2 = 0.19 in…

Q: GIVEN: Solid steel shaft shown below with a 12 mm diameter. Gstee = 80 x 10° N/m² E 40 N-m 280 N-m…

A: Given, d = 12 mm = 0.012 mGsteel = 80 × 109 N/m2LAC = 0.4 mLCD = 0.3 mLDE = 0.5 m From diameter,…

Q: Find the maximum shear stress if maximum principal stress is 30 MPa Minimum principal stress 20 Mpa

Q: 30 kN.m/m B Q1) Use G = 83 GPa, Find the maximum shear stress H m- D-0.1m

A: To find: The maximum shear stress. Given: The torque is T=30 kN·mm. The diameter of shaft is D=0.1…

Q: 500 lb • ft Aluminum Steel Bronze 1.0 in. 2 in. $1.0 in. B 6 ft 4 ft 3 ft rIG. P FIG. P3.22 3.22 The…

Q: Determine the limiting peripheral velocity of a steel ring if the allowable stress is 20 ksi the…

Q: A shaft running at 400 r.p.m. transmits 10 kW. Assuming allowable shear stress in shaft as 40 MPa,…

A: Note: Since you have asked multiple question, we will solve the first question for you. If you want…

Q: 1.5 kN m 4 kN m Steel Aluminum Bronze 100 mm 75 mm 3 m 2 m -1.5 m- C FIG. P3.12 FIG. P3.11 3.12 The…

A: Answer: (a) Maximum shear stress in each material : ◆ Aluminum : 28.0 MPa. ◆ Steel and Bronze :…

Q: A pipe with an outside diameter of 300 mm and a wall thickness of 5 mm is subjected to the loads…

A: Stress: It is a force per unit area. As this is cylindrical shape stress on this pipe is mainly hoop…

Q: 2- Compare the weight of equal lengths of hollow and solid shafts to transmit a torque T for the…

Q: Q4-A circular shaft consists of steel and aluminum segments is subjected to the torques shown in…

Q: is shown below, 400 300 200 100 Stress (MPa)

A: 1.Modulus of elasticity can be obtained by taking the slope of stress-strain curve in elstic…

Q: Q1. Find the diameter of a solid steel shaft to transmit 30 kW at 250 r.p.m. The ultimate shear…

Q: Two shafts are being connected by a coupling which is held together by four 3/4-in diameter bolts.…

Q: For the given system; a) Draw internal force diagrams and determine the most critical section. b)…

Q: h G bị Q4) For the given system; a) Draw internal force diagrams and determine the most critical…

Q: A thin cylindrical pressure vessel with closed-ends is subjected to internal pressure. The ratio of…

Q: Find the proper spacing for 8-mm diameter steel rod for a 1.80-m diameter wood stave pipe if the…

Q: Form 160 MPa 45 MPa TL 2sikin --ja-0,6306/a) My 100 MPa 100MPA 45 MPa 60 MPa Tmaks Find the normal…

Q: 1 MPа 2- For the state of stress as shown below, 2 МPа a) Find principal stresses З МРа b) Draw…

Q: For the element shown find 1) Principle stresses and their direction 2) Shear stresses and their…

Q: 1. A shaft 80 mm diameter transmits power at maximum shear stress of 63 MPa. Find the length of a 20…

A: Given data diameter of shaft (d) = 80 mm maximum shear stress in shaft (τmax) = 63 MPa width of…

Q: Given Ox = -7Mpa, Oy = 3 Mpa y T = 8 Mpa, calculate the greatest principal stress and the maximum…

Q: Q2 /A steel shaft transmits 800 kw of power at 210 pm Determine the actual working stress and the…

Q: A shaft 80 mm diameter transmits the power at maximum shear stress of 63MPa. Find the length of a…

A: Given details: d=80 mmζmax=63 MPawkey=20 mmζkey=42 MPa Formula used:…

Q: A shaft running at 400 r.p.m. transmits 10 kW. Assuming allowable shear stress in shaft as 40 MPa,…

A: GivenN=400rpmP=10kWσa=40MPa

Q: Q4/ In a horizontal belt drive for a centrifugal blower, the blower is belt driven at 600 rp.m. by a…

A: “Since you have posted a question with multiple sub-parts, we will solve the first three sub-parts…

Q: Dmm Ø20 0,1 Ø10 20 2. Draw diagram of normal stresses.

A: Here bending stresses will be normal stresses. The normal stresses diagram drawn in step 2.

Q: A aluminum tank with a wall thickness of 2mm and radius of 120mm is 9m long was pressurized to…

Q: 500 lb • ft Tc Aluminum Steel Bronze A 1.0 in. 2 in. +1.0 in. 6 ft 4 ft + 3 ft rIG. P FIG. P3.22…

Q: qo M h For the given system; a) Draw internal force diagrams and determine the most critical…

A: Consider horizontally forward & vertically upward force as (+)ve and horizontally backward &…

Q: o gears of 12 mm face width. The Small one river) which transmits 30 Hp ewith 1500rpm. has 13 teeth…

Q: Find maximum shear stress Maximum principal stress-8 MPa Minimum principal stress=3 MPa

A: Given data : Maximum principal stress=σ1 Minimum principal stress=σ2 To find : Maximum shear…

Concept explainers

Buckling of columns

The column is described as a vertical member of the structure that carries an axial compressive load, and buckling is a lateral deformation of the column under the application of load.

Question

None

Q1) A closed-end pressure vessel (d, = 300mm & t=10mm) is subjected
to an internal pressure of 6MPA. Find the maximum torque which can also
be applied if the normal stress in the walls of the vessel is limited to
100MPA, then determine the planes of maximum stresses.
(CH,

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The hollow drill pipe for an oil well (sec figure) is 6,2 in. in outer diameter and 0.75 in. in thickness. Just above the bit, the compressive force in the pipe (due to the weight of the pipe) is 62 kips and the torque (due to drilling) is 185 kip-in. Determine the maximum tensile, compressive, and shear stresses in the drill pipe.
A hemispherical window (or viewport) in a decompression chamber (see figure) is subjected to an internal air pressure of 85 psi. The window is attached to the wall of the chamber by 14 bolts. (a) Find the tensile force Fin each bolt and the tensile stress (T in the viewport if the radius of the hemisphere is 14 in. and its thickness is 1.25 in. (b) If the yield stress for each of the 14 bolts is 50 ksi and the factor of safety is 3.0, Find the required bolt diameter. (c) If the stress in the viewport is limited to 500 psi, find the required radius of the hemisphere.
A large spherical tank (see figure) contains gas at a pressure of 420 psi. The tank is 45 ft in diameter and is constructed of high-strength steel having a yield stress in tension of 80 ksi. (a) Determine the required thickness (to the nearest 1/4 inch) of the wall of the tank if a factor of safety of 3,5 with respect to yielding is required. (b) If the tank wall thickness is 2.25 in., what is the maximum permissible internal pressure?
‘7.3-11 The stresses on an element are sx= -300 psi and sy= 600 psi. Find the maximum shear stresses on the element and show them on a sketch of a properly oriented clement.
A circular aluminum tube subjected to pure torsion by torques T(sec figure) has an outer radius r2equal to 1.5 times the inner radius r1. (a) If the maximum shear strain in the tube is measured as 400 × 10-6 rad, what is the shear strain y1at the inner surface? (b) If the maximum a1lo-abk rate of twist is 0.125 °/m and the maximum shear strain is to be kept at 400 × 10-6 rad by adjusting the torque T, that is the minimum required outer radius ( r2)Min?
A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer diameter of 4.5 in. and thickness of O.OS in. Calculate the longitudinal stress, the circumferential stress, and the maximum shear stresses (out-of-plane and in-plane) at the outer surface of the tank.
A standpipe in a water-supply system (see figure) is 12 ft in diameter and 6 in. thick. Two horizontal pipes carry water out of the standpipe; each is 2 ft in diameter and 1 in. thick. When the system is shut down and water fills the pipes but is not moving, the hoop stress at the bottom of the standpipe is 130 psi, (a) What is the height h of the water in the standpipe? (b) If the bottoms of the pipes are at the same elevation as the bottom of the stand pipe. what is the hoop stress in the pipes?
A thin-walled rectangular tube has uniform thickness t and dimensions a x b to the median line of the cross section (see figure). How does the shear stress in the tube vary with the ratio = a/b if the total length Lmof the median line of the cross section and the torque T remain constant? From your results, show that the shear stress is smallest when the tube is square (ß = 1).
The stresses acting on an element are x= 750 psi, y= 600 psi, and xy = 400 psi. Determine the principal stresses and show them on a sketch of a properly oriented element.
Solve the preceding problem if the norm al and shear stresses acting on the element are sx = 2100 kPa, sy= 300 kPa, and txy= -560 kPa, and the seam is oriented at an angle of 22.5° to the clement.
A tubular shaft being designed for use on a construction site must transmit 120 kW at 1,75 Hz, The inside diameter of the shaft is to be one-half of the outside diameter. If the allowable shear stress in the shaft is 45 MPa, what is the minimum required outside diameter d?
The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?