One of the CHEM3341 student Ms. Fatima Al Wahaibi wanted to analyse phosphate ion concentration in Fertilizer industry wastewater sample collected from Rusayl Industrial Estate using spectrophotometer method. She mixed 200.00 mL of wastewater sample which contains only Na,PO, (unknown molarity) with 400.00 mL of 0.0200 M K,PO4 in a one liter beaker to make a Solution A. She then transferred 25.00 mL of Solution A to a 250.00 mL volumetric flask and added distilled water up to the calibration mark to make up Solution B. The Concentration of phosphate ions in Solution B is known to contain 3.00 x 103 mol/L from the spectrophotometric analysis at 460 nm using 1 cm cuvette. Calculate the concentration of phosphate ion in wastewater and how many phosphate ions are present in this wastewater.

One of the CHEM3341 student Ms. Fatima Al Wahaibi wanted to analyse phosphate ion concentration in Fertilizer industry wastewater sample collected from Rusayl Industrial Estate using spectrophotometer method. She mixed 200.00 mL of wastewater sample which contains only Na,PO, (unknown molarity) with 400.00 mL of 0.0200 M K,PO4 in a one liter beaker to make a Solution A. She then transferred 25.00 mL of Solution A to a 250.00 mL volumetric flask and added distilled water up to the calibration mark to make up Solution B. The Concentration of phosphate ions in Solution B is known to contain 3.00 x 103 mol/L from the spectrophotometric analysis at 460 nm using 1 cm cuvette. Calculate the concentration of phosphate ion in wastewater and how many phosphate ions are present in this wastewater.

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter27: Molecular Fluorescence Spectroscopy

Section: Chapter Questions

Problem 27.13QAP

See similar textbooks

Similar questions

Equations for the chemiluminescence determination of SO2 are given on page 383. Derive an expression for the relationship between the concentration of SO2 in a sample, the luminescence intensity, and the equilibrium constant for the first reaction.
Commercial Vanadyl Sulfate (VOSO4) is contaminated with H2SO4 and H2O. A solution was prepared dissolving 0.2447 g of impure VOSO4 in 50.00 mL of water. A spectrophotometric analysis indicated that the The concentration of vanadyl ions, VO2+ (blue) was 0.0243 M. A 5.00 mL sample was passed through a column filled with a cation exchange resin in H+ form, to retain the vanadyl ion and the eluent necessary for its titration 13.03 mL of NaOH 0.02274 M. Calculate the percentage by weight of each component (VOSO4, H2SO4, and H2O) in commercial vanadyl sulfate. (Pm VOSO4, 162.96; H2SO4, 97.94)
4. determine the amount in mg of the amount of Ag present from ICP mass digested: 1.0821g/L dilution of 10ml stock solution to 100ml volumetric flask X=0.98 (intensity)
The iron content of a municipal water supply was determined by an atomicabsorption procedure. The absorbance of the water, after a five-fold dilution, was0.755 at 248.3 nm. A standard solution, prepared by dissolving 0.2018 g of pureiron wire in acid, diluting to 250.0 mL, and then making a 100-fold dilution, hadan absorbance of 1.015. Calculate the ppm Fe in the water sample
The water in Fell city also contains 30 μg/L of chloroform (formed in the water treatment plant), 5 μg/L of chlorpyriphos (a persticide), and 10 μg/L of chromium VI. Given the reference doses below, calculate the total hazard quotient. State which compound is the total HQ is acceptable. References doses (all mg/kg.d): 0.01 for chloroform, 0.0003 for chlorpyiphos, and 0.003 for chromium VI. Answer: 0.66
Anionic surfactants in wastewater are measured spectrophotometrically as methylene blue active substances (MBAS). A volume of a water sample is first reacted with methylene blue, a cationic dye, in a basic buffered aqueous solution. The resulting solution is agitated after the addition of chloroform. The organic layer is then extracted, and the absorbance is read at 655 nm. A standard calibration curve is produced by plotting absorbance vs. concentration for the concentration range between 0 ppm to 2.50 ppm. The line had the following equation: y = 0.286x + 0.009 a. The limit of surfactant content in Philippine class B water is 300 ppb. If a 5 mL aliquot of a 50 mL water sample had an absorbance of 0.084 after MBAS analysis, is the sampled water body suitable for bathing? Support your answer
As part of an analytical chemistry laboratory course, a student measured the Ca2+ content in two water samples, city-supplied drinking water and well-supplied drinking water, using two different analytical methods, flame atomic absorption spectrometry (FAAS) and EDTA complexometric titration. The results of this experiment are given in the table as the mean Ca2+concentration (?¯) and standard deviation (?) in parts per million (ppm). Each sample was measured five times (n=5) by each method. Method City-Supplied Drinking Water (?¯±?x¯±s) Well-Supplied Drinking Water (?¯±?x¯±s) FAAS 57.57±0.68 ppm 64.77±0.70 ppm EDTA titration 58.32±0.96 ppm 65.62±0.97 ppm Method Comparison: For each drinking water sample (city and well), compare the Ca2+ content measured by FAAS and EDTA titration. Calculate the ? value for each sample. Do the methods produce statistically different results at the 95% confidence level when measuring the Ca2+content of the city-supplied drinking water? Do the…
A 50 mL aliquot of river water is treated with a conditioning solution, which is stirred and recorded at 500 nm. The equipment reading indicated 40.5% Transmittance with 1.5 cm optical path cuvettes. Calculate the ppm of sulfate (PM 96 g / mol) in river water if a standard of 3.0x10-5 mol / L of sulfate, under the same conditions, gave 55% Transmittance in cuvettes with 1.5 cm of passage. optical.
Lead in dry river sediment was extracted with 25 wt% HNO3 at incubation temperatures for 1 hr. Then 1 mL of filtered extract was combined with other reagents to a total of 4.60 mL. Pb+2 was measured by an electrochemical method by spiking with 2.50 ppm Pb2+. added vol. of 2.50ppm Pb2 signal 0 mL 1.10 0.025 mL 1.66 .050 mL 2.20 .075 mL 2.81 what is Sx based on Sy
Suppose that you are trying to measure the concentration of SO2 in air. To do that, you followed the para-rosaniline method. The SO2 was collected in a 10-ml solution of HgCl4 2- then diluted to 25 ml after the addition of the appropriate reagents. The absorbance owas measured at 650 nm in a 2.0-cm cell, yielding a value of 0.535. A standard sample was prepared by substituting a 1.00 mL sample of a standard solution containing the equivalent of 15.00 ppm SO2 for the airsample. The absorbance of the standard is found out to be 0.191. Report the concentration of SO2 in the air in parts per million. The density of air is 1.19 g/L
A second spectrophotometric method for the quantitative analysis of Pb2+ in blood yields an Ssamp of 0.712 for a 5.00 mL sample of blood. After spiking the blood sample with 5.00 μL of a 1560 ppb Pb2+ external standard, an Sspike of 1.546 is measured. What is the concentration of Pb2+ in the original sample of blood?
A 0.500g sample is analyzed spectrophotometrically for manganese by dissolving it in acid and transferring to a 250 mL flask and diluting to volume. Three aliquots ae analyzed by transferring 50 mL portions with a pipet to 500 mL Erlenmeyer flask and reacting with an oxidizing agent, potassium peroxydisulfate, to convert the manganese to permanganate. After reaction, these are quantitatively transferred to 250 mL volumetric flasks, diluted to volume and measured spectrophotometrically. By comparison with standards, the average concentration of the final solution is determined to be 1.25 x 10^-5M. What is the percent manganese in the sample?