Q8(): For the truss shown in theFigure, if the diameter of pins atA and G are 3 in and 2 in,respectively. Both stresses in Aand70 kips 50 kips4 ftB 4 ftaredoubleshear.Determine the shear stresses inpins at A and G and the stressesin9 ftmembers AG; AFmember GF if their diameter is 4andin.

Given: dA = 3 in. dG = 2 in. To find: shear stress in pins A and G. Stresses in the members AG,…

Q8(0: For the truss shown in the Figure, if the diameter of pins at A and G are 3 in and 2 in, respectively. Both stresses in A and G Determine the shear stresses in pins at A and G and the stresses in members AG; AF and member GF if their diameter is 4 in. 70 kips 50 kips A 4ft B 4ft C 4ft are double shear. 9 ft

Q8(0: For the truss shown in the Figure, if the diameter of pins at A and G are 3 in and 2 in, respectively. Both stresses in A and G Determine the shear stresses in pins at A and G and the stresses in members AG; AF and member GF if their diameter is 4 in. 70 kips 50 kips A 4ft B 4ft C 4ft are double shear. 9 ft

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.3.1P: A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer...

See similar textbooks

Similar questions

Repeat the previous problem using ? = 50° and stresses on the rotated element: sy1= 70 MPa, ??y1=-82 MPa, and tx1y1=-35 MPa.
A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer diameter of 4.5 in. and thickness of O.OS in. Calculate the longitudinal stress, the circumferential stress, and the maximum shear stresses (out-of-plane and in-plane) at the outer surface of the tank.
.4 The stresses on an clement arc known to be sx= 120 MPa, sy= 100 MPa, and txy= 75 MPa. Find the stresses on an inclined section through the element at an angle ? = 45°.
For the pin connection shown, determine the normal stress acting on the gross area, the normal stress acting on the net area, the shear stress in the pin, and the bearing stress in the steel plate at the pin.
If P is equal to 125 kN Determine the normal stresses of members DH & HG in kPa. The diameter of each member is 120 mm.
The drill shown is jammed in the wall and is subjected to the torque and force shown in the diagram. Determine the normal stress (in MPa) at point A on the cross section of the drill bit at section a−a.
!! Show Complete & Detailed Solution w/ FBD !!From the figure shown, the diameter of each segment is indicated. Determine the average normal stress developed at points.a. Ab. Bc. C.
Calculate the normal stresses at points A and B of the bracket caused by the 30-kN force.
All members of the truss shown have a cross-sectional area of 500mm2 and all pins have a diameter of 20mm2. Determine: (a)The axial stresses in members BC and DE. (b)The shear stresses in the pin at A, assuming the pin is in double shear.
Determine the average normal stress developed at points A, B, and C. The diameter ofeach segment is indicated in the Figure below.
Determine the principal stresses andmaximum in-plane shear stress of given stresselement.
A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 30 mm. The outer diamter and thickness of the pressure vessel is 500 mm and 10 mm. Its length is 2m. Determine the maximum internal pressure (MPa) that can be applied if the longitudinal stress is limited to 155 MPa, and the circumferencial stress is limited to 55 MPa.