QL.A.For a separately excited de generator of (0.32 ohm) armature circuit resistance. If thegenerator driven at 1400r/min, open circuit terminal voltage versus the field curent(open cireuit characteristics) provided the following data:580.2179Ec (V)It (A)301141530.10.40.60.8IF field current is adjusted to 0.5 A and the generator driven at 1000r/mina) plot the output voltage as the load current is varied from 0 to 60 A.b) calculate the voltage regulation If the full-load current is 60 A.

GIVEN: A table between EG(V) and If(A) EG(V) 6 30 58 114 153 179 If(A) 0 0.1 0.2 0.4 0.6 0.8…

QL.A. For a separately excited de generator of (0.32 ohm) armature circuit resistance. If the generator driven at 1400r/min, open circuit terminal voltage versus the field current (open circuit characteristies) provided the following data: Ec (V) Ie (A) 30 58 114 153 179 0.1 0.2 0.4 0.6 0.8 IF field current is adjusted to 0.5 A and the generator driven at 1000r/min a) plot the output voltage as the load current is varied from 0 to 60 A. b) calculate the voltage regulation If the full-load current is 60 A.

QL.A. For a separately excited de generator of (0.32 ohm) armature circuit resistance. If the generator driven at 1400r/min, open circuit terminal voltage versus the field current (open circuit characteristies) provided the following data: Ec (V) Ie (A) 30 58 114 153 179 0.1 0.2 0.4 0.6 0.8 IF field current is adjusted to 0.5 A and the generator driven at 1000r/min a) plot the output voltage as the load current is varied from 0 to 60 A. b) calculate the voltage regulation If the full-load current is 60 A.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Find the synchronous impedance and reactance of an alternator in which a given field current produces an armature current of 300A on short-circuit and generated emf of 40V on an open-circuit. The armature resistance is 0.1 ohm. To what induced voltage must the alternator be excited if it is to deliver a load of 100A at pf of lagging, with a terminal voltage of 300V.
A separately excited generator,when running at 1000rpm supplied 200A at 125V. What will be the load current when the speed drops to 800rpm if current is unchanged? Given the armature resistance of 0.04 ohms and brush drop of 2V.
A separately excited generator has no-load voltage of 125V. A certain load rated at 1200W, 120V is then connected at the terminal. Calculate the series resistance needed to connect to the armature circuit in order for the load to operate at rated condition if the armature resistance is 0.0692Ω.
The armature winding resistance of a long shunt connected DC generator is 0.4ohm, the resistances of the shunt and serial field windings are 125 ohms and 0.1 ohms, respectively. While the generator supplies 8KW of power to the load it feeds, which is the voltage it produces since the output voltage is 250V?
A 110V shunt generator has a full load current of 100A, shunt field resistance of 55 ohms and constant losses of 500W. If full load efficiency is 88%, find the armature resistance. Assuming voltage to be constant at 110V, calculate the efficiency at half load. Find the load current.
A shunt generator supplies a 20kW load at 200V through cables of resistance, R= 100mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =40mΩ, determine (a) the terminal voltage, and (b) the e.m.f. generated in the armature
6/ What are the parameters required for the internal characteristics of the DC Generator? a. Terminal voltage (V) and Field current (If) b. Generated EMF (Eg) and Armature current (Ia) c. Terminal voltage (V) and load current (IL) d. Generated EMF (Eg) and Load Current (IL)
Of a shunt excited DC generator, Excitation winding internal resistance Rf = 2.5 Ω Armature winding internal resistance Ra = 0.5 Ω A rheostat has been placed in the excitation circuit to keep the machine's end voltage constant at Va = 30 V. Machine Voltage magnetization induced in the armature while operating at n = 1400 rpm at If = 7 A excitation current It is determined as Ea = 30 V from its characteristic. According to this, a) With peak voltage Va = 30 V, excitation current If = 7 A, power supplied to the load when the speed n = 1400 rpm What is the resistance of the rheostat? b) Spindle revolutions are reduced to n = 1000 rpm. In this case Va = 30 V and Ea = 37 V constant What value should the rheostat be adjusted to keep it? Calculate the power given to the load in this new case.
A 10 kW, 250 V self-excited generator, when delivering rated load, has an armature circuit voltage drop that is 5% of the terminal voltage and a shunt field current equal to 5% of rated load current. Calculate the resistance of armature circuit and that of the field circuit.
- A separately excited 4 - pole, 900 rpm wave wound dc generator has an induced emf of 240V at rated speed and rated field current. When connected to a load, the terminal voltage is observed to be 200V. If the armature resistance is 0.2 Ω and the flux per pole is 10 m Wb, compute the armature current and the number of conductors
Two similar 6,600-V, 3-φ, generators are running in parallel on constant-voltage and frequency bus bars. Each has an equivalent resistance and reactance of 0.05 Ω and 0.5 Ω respectively and supplies one half of a total load of 10,000 kW at a lagging p.f. of 0.8, the two machines being similarly excited. If the excitation of one machine be adjusted until the armature current is 438 A and the steam supply to the turbine remains unchanged, find the armature current, the e.m.f. and the p.f. of the other alternator. [789 A, 7200 V, 0.556]
Q23) A shunt generator supplies a 20KW load at 200V through cables of resistance, R = 100mΩ. If the field winding resistance ,Rf=50Ω and the armature resistance, Ra=40mΩ, i) Estimate terminal voltage across the load. ii) Calculate the emf generated in the armature.