I need it handwritten and all the parts I'll rate but pls all and correct Question (1)power screw has single square threads. It has a major diameter of 36 mm and a pitch of 6 mm.The coefficient of friction for the threads is 0.13 and that for the collar is 0.1 which has aneffective diameter of 90 mm. This power screw is required to raise a load of 70 kN at a screwrotational speed of 2 revolutions per second. Circle the correct answer in the following:A b) The lead for the screw is:(а) 6 mmc) The root (minor) diameter is:(а) 36 mm(b) 12 mm(c) 3 mm(d) 1.5 mm(b) 30 mm(c) 33 mm(d) 34.5 mmd) The torque required to raise the load is:(a) 533.6 N.m (b) 553.5 N.m (c) 218.64 N.me) The power required to raise the load is:(a) 6.95 kW (b) 6.7 kW(d) 315 N.m(c) 2.75 kW(d) 3.95 kWh land hy 1 m?:

Answered: Image /qna-images/answer/4a13a1ff-5914-4c0a-92ee-4cd5daa8d286.jpg

Question (1) A power screw has single square threads. It has a major diameter of 36 mm and a pitch of 6 mm. The coefficient of friction for the threads is 0.13 and that for the collar is 0.1 which has an effective diameter of 90 mm. This power screw is required to raise a load of 70 kN at a screw noond Circle the correct answer in the following:

Question (1) A power screw has single square threads. It has a major diameter of 36 mm and a pitch of 6 mm. The coefficient of friction for the threads is 0.13 and that for the collar is 0.1 which has an effective diameter of 90 mm. This power screw is required to raise a load of 70 kN at a screw noond Circle the correct answer in the following:

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.57P: The square-threaded screw with a pitch of 10 mm and a mean radius of 18 mm drives a gear that has a...

See similar textbooks

Similar questions

The square-threaded screw with a pitch of 10 mm and a mean radius of 18 mm drives a gear that has a mean radius of 75 mm. The static and kinetic coefficients of friction between the gear and the screw are 0.12 and 0.06, respectively. The input torque applied to the screw is C0=10Nm. Assuming constant speed operation, determine the output torque C1 acting on the gear.
A square threaded power screw has an efficiency of 65% when raising the load. The coefficientof friction for the threads is 0.15, with the collar friction negligible. Determine the lead angle of thescrew.
A double square thread power screw has a pitch of 6 mm and mean radius of 34 mm. If it is used to lift a load 50 kN and coefficient of friction of threads is 0.15, determine the torque required to turn the screw.
Determine the force required to raise a load of 3100 lbs., when a 2.5 in. triple threaded square power screw is used along with a collar having an outer diameter 4.5 in. and inner diameter 3.0 in. The pitch of the thread is 0.5 in. The operating force is applied at a radius of 38 in. Assume the coefficient of friction for both collar and threads as 0.2.
A single trapezoidal metric thread power screw is to raise a load of 60 kN. The screw has a mean diameter of 34 mm and a pitch of 5 mm. The coefficient of thread friction and collar friction are 0.15 and 0.11, respectively. The collar mean diameter is 90 mm and the screw turns at 150 rpm. Determine the total torque required to raise the load in N-m.
The following lead screw and saddle arrangement is used to lift aload of 550 kg. The square thread has a pitch of 3 mm and a diameter of 15 mm. The coefficient of friction is 0.2. Calculate the torque required to rotate the screw on raising and lowering.
A vertical power screw with double start square threads of 50 mm mean diameter and 11mm pitch is raised against a load of 10 kN by means of a hand wheel, the boss of which is threaded to act as a nut. A thrust collar, taking up the axial load,supports the wheel boss and has a mean diameter of 60mm. The coefficient of friction is 0.18for the screw and 0.16for the collar. If the tangential force applied by each hand to the wheel is 200 N, find suitable diameter of the hand wheel.
A square thread has a pitch of 3 mm and a diameter of 15 mm. The coefficient of friction is 0.2. Calculate the torque required to rotate the screw on raising and lowering a load of 500kg
The required clamping force at the board A is to be 1.7 kN . The square-threaded screw has a mean radius of 10 mm and a lead of 3 mm, and the coefficient of static friction is 0.3. (Figure 1) Determine the torque M that must be applied to the screw to tighten it down. Express your answer to three significant figures and include the appropriate units.
An acme thread power screw that has a mean diameter of 25 mm and pitch of 5 mm is used to lift a load of 500 kg. If friction on threads is 0.1, determine the torque needed to turn the screw.
Solve the problem, show your complete solution. Answer must be in 3 decimal places. 1. A multiple-disk clutch transmits 25 kW at 600 rpm. It has 17 disks, 8 disks mounted on one shaft and 9 on the other shaft. The disks are 150 mm outside diameter and 70 mm inside diameters, respectively. If the coefficient of friction is 0.25, find the axial force required to engage the clutch and transmit the torque.
The lead screw of a lathe has Acme threads of 60 mm outside diameter and 8 mm pitch. It supplies drive to a tool carriage which needs an axial force of 2150 N. A collar bearing with inner and outer radius as 30 mm and 60 mm respectively is provided. The coefficient of friction for the screw threads is 0.12 and for the collar it is 0.10. Find the torque required to drive the screw and the efficiency of the screw.