Table 3b.1. Observations on the metal paper clip or needle placed on the surface of distilled water and distilled water with dilute amount of liquid detergent. Observations Substances Distilled water with dilute amount of liquid detergent Distilled water After dropping the tissue paper with metal paper clip or needle on the surface of the sample. After removal of the tissue paper.

Table 3b.1. Observations on the metal paper clip or needle placed on the surface of distilled water and distilled water with dilute amount of liquid detergent. Observations Substances Distilled water with dilute amount of liquid detergent Distilled water After dropping the tissue paper with metal paper clip or needle on the surface of the sample. After removal of the tissue paper.

Macroscale and Microscale Organic Experiments

7th Edition

ISBN:9781305577190

Author:Kenneth L. Williamson, Katherine M. Masters

Publisher:Kenneth L. Williamson, Katherine M. Masters

Chapter7: Extraction

Section: Chapter Questions

Problem 1Q

See similar textbooks

Similar questions

A polymer of large molar mass is dissolved in the organic solvent m-cresol (C7H8O) at 25 °C, and the resulting solution rises to a final height of 13.4 cm above the level of the pure solvent, as solvent molecules pass through a semipermeable membrane into the solution. If the solution contains 5.24 g polymer per liter, calculate the molar mass of the polymer. Take the density of the solution to be 1.03 g cm-3.
Describe in words and by means of complete chemical equations, how a mixture of 1.25 g of benzoic acid tertbutylbenzene can be separated by applying the separation of 2 components by liquid-liquid extraction.
The following evidence was obtained from an experiment to determine the solubility of calcium chloride at room temperature. A sample of saturated calcium chloride solution was evaporated to dryness, and the mass of solid residue was measured.EvidenceVolume of solution (mL) = 15.0Mass of empty beaker (g) = 90.54Mass of beaker and residue (g) = 101.36The solubility of calcium chloride is g/100 mL
The distribution coefficient of an organic salt between hexane and water is 90. A quantity of 0.1 mol of the salt dissolved in 100ml of water. Predict how many moles of the salt will remain within the aqueous phase following extraction by using four 25ml of aliquots of hexane to extract the salt from the aqueous solution
The distribution coefficient, KD (C water/C ether), between ether and water for aspirin at room temperature is 0.30. What weight of aspirin would be extracted by a single extraction with 300 mL of water from a solution of with a concentration of 0.67 M? Calculate the weight of aspirin which would be removed by three extractions with 100 mL portions of water. Compare the weight of solute extracted in single extraction process with the triple extraction process. Take note: The volume of the solution is 100ml
Water and 1-butanol are only partially miscible, so that when the two liquids are mixed, separate phases are formed. A mixture is prepared, in which the volumes of the aqueous and organic phases are equal. Ethanoic acid is then added to the mixture. The concentration in the aqueous phase is 0.094 mol dm-3 and in the organic phase 0.014 mol dm-3 . Additional solvent is then added such that the volume of the aqueous phase becomes double that of the organic phase. What are the new concentrations?
There are two separate phases, one with a composition of 12% phenol and the other with a composition of 60% phenol, from a 210 gram phenol-water mixture at 60 °C with a composition of 35% phenol. Calculate the masses of these phases.
4.0g of potassium hydrogen tartrate was added to 300mL distilled water. The temperature of the solution is 23.1C. The liquid was filtered and 50mL of the filtered solution was transferred to 250mL beaker, two drops of phenolpthalein was added to the 250mL beaker. The concentration of NaOH is 1.0 M that is filled in the 2mL graduate pipette, single drops of NaOH was added to the 250mL beaker until the solution turns pink and the potassium hydrogen tartrate reach the endpoint. The datd of four trials was collected. Please answer the following questions 4) calculate ksp for potassium hydrogen tartrate for each trial and average ksp for thr experiment 5) calculate the percent error in you value of ksp using reference that is found as the theoretical value. 6) why was the temperature of the saturated solution recorded?
4.0g of potassium hydrogen tartrate was added to 300mL distilled water. The temperature of the solution is 23.1C. The liquid was filtered and 50mL of the filtered solution was transferred to 250mL beaker, two drops of phenolpthalein was added to the 250mL beaker. The concentration of NaOH is 1.0 M that is filled in the 2mL graduate pipette, single drops of NaOH was added to the 250mL beaker until the solution turns pink and the potassium hydrogen tartrate reach the endpoint. The datd of four trials was collected. Please answer the following questions 1) calculate the total volume and moles of NaOH required to reach the endpoint for each trial. 2) calculate the molar solubility of potassium hydrogen tartate ( in mol/L) for each trial. 3) calculate the average molar solubility of potassium hydrogen tartate for the four trials. What is the average solubility of potassium hydrogen tartrate in g/L? 4) calculate ksp for potassium hydrogen tartrate for each trial and average ksp for thr…
Introduction of determination of excess molar volume of binary mixture of water and methanol by measuring density ?
what is the purpose of preparing of a standard sodium hydroxide solution in determination of purity of impure KHP?
Describe the distillation of partial miscible liquid in terms of phase diagram.