The beam with the loading as shown in the figure is fixed at A and simply supported at B. Determine the magnitude of the reaction moment at A if the vertical reactions forces at A and B are taken to be equal. Take w =3 kN/m, L1 = 9.6 m, L2 = 3 m and L3 = 6.8 m.

The beam with the loading as shown in the figure is fixed at A and simply supported at B. Determine the magnitude of the reaction moment at A if the vertical reactions forces at A and B are taken to be equal. Take w =3 kN/m, L1 = 9.6 m, L2 = 3 m and L3 = 6.8 m.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.5.11P: The horizontal beam ABC of an oil-well pump has the cross section shown in the figure. If the...

See similar textbooks

Related questions

Q: Find the bearing reaction forces of the beam in the figure.

Q: A beam AB is 13 m long weighs 10N resting on the two supports at the end. If the beam carries loads…

Q: A 20.0-m-long uniform beam weighing 560 N rests on walls A and B, as shown in the figure (Figure 1).…

A: Given dataLength of the beam L = 20mWeight of the beam W = 560NTo determinea) Find the maximum…

Q: A beam (AB) is attached to a roller at A and a pin at B. It is subjected to three concentrated…

Q: Sample Problem: Determine the reactions for the beam loaded as shown in the figure below. 12 KN 15…

Q: Calculate the support reactions at A and B for the beam subjected to the tv linearly distributed…

A: Reaction Ay will be at point A and reaction By will be at point B

Q: Find the external reactions at support A (fix-end) for the beam shown in the figure. 7 kN 4 kN/m 30…

A: Given data: Moment=30 kN.m Need to determine the external reactions at support A.

Q: Problem 2) From the figure below, determine: 1. the horizontal reaction at A; 2. the vertical…

Q: For the beam shown below , Find the support reactions at A and B *

Q: 5. For the beam loaded as shown, calculate the internal axial force, shear force, and bending moment…

A: Let's mark the point E as shown in below figure.

Q: AB is a cantilever beam and carries two horizontal loads and a vertical load as shown in the figure.…

Q: A rigid beam of negligible weight is supported by a hinge at A and a rocker at B as shown in the…

A: Given:F=16 KN

Q: W M A B LI L2 L3 Figure-4 The beam is loaded and supported as shown in Figure-4. If w=50 kN/m, M=124…

Q: The beam ABC shown in the figure is simply supported at A and B and has an overhang from B to C. The…

Q: P3 (kN) P4 (kN) B 30 kN A L3 (m) L4 (m)

A: Solution: Reactions and B and C can be found using static equilibrium conditions, therefore,…

Q: Calculate the reactions at A and B for the beam subjected to two linearly distributed loads as shown…

Q: Draw the shear force diagram and bending moment diagram for the loaded cantilever beam as shown in…

Q: The second moment of area about the neutral axis of the H-section shown in the figure is,

A: Given that: The shape is H shape. It is required to determine the second moment of area of the given…

Q: Statics

Q: Q7: for the figure shown below, calculate the reactions at the point O 30/ 3 kN 15 kN-m B 1.4 kN 1.2…

Q: A beam is subjected to a distributed load and a concentrated force F (magnitude 400 N) at the end of…

Q: If the beam in the figure below is in equilibrium (A is a pin and B is a roller), determine the…

A: First of all, make a FBD of the diagram as shown below,

Q: Q2 (a) The uniformly loaded beam ABC has simple supports at A and B and an overhang BC (see Figure…

Q: Problem 3. Problem. The upper beam in figure is supported by a reaction R3 at D and a roller at C…

Q: For the beam shown, find the reactions at the supports and plot the shear-force and bending-moment…

Q: With the same loading conditions as in problem a, and to reduce the deflection at C, a roller…

A: Draw a free body diagram showing the reactions acting and each of the supports. Here, RA, RB, and…

Q: 3. Draw the shear and moment diagrams for the beam below. Be sure to label all local maxima and…

Q: Express shear force V and bending moment M as functions of arbitrary position x along the axis for…

Q: Problem 1. For the frame shown in the figure, determine (a) Reactions at the supports (b) Axial…

A: a) At equilibrium, Taking moment about A, ∑MA=0 -8×5-12×322-25×3-30×7.5-12×15-10×7+12VF=0VF=53.67 N…

Q: Replace the loading acting on the beam by an equivalent resultant force FR and couple moment (MR)C…

Q: The channel section carries a uniformly distributed load totaling 6W and two concentrated loads of…

Q: 15 kN 5 kN/m The simply supported beam with a distributed load and couple moment at its center as…

Q: A beam AB is 14 m long weighs 15 N resting on the two supports at the end. If the beam carries loads…

Q: A W410 x 60 standard steel shape is used to support the loads shown on the beam in the figure below.…

A: For solution refer below images.

Q: If the beam in the figure below is in equilibrium (A is a pin and B is a roller), determine the…

Q: Find the external reactions at supports A (hinge) and B (roller) for the beam shown in the figure.…

A: To find: The external reaction supports A and B. FBD: The free body diagram shown below:

Q: Question 1: In the system shown in the figure, built-in support at point A, fixed support at point B…

Q: For the frame structure as in the figure, determine the total moment at : MA ,MB, MO

Q: Q/4/.. Draw the shear force and bending moment diagram for the beam and Find the reaction at support…

A: Consider the diagram shown below for the given system.

Q: J: A horizontal beam with a length of 4.5 m is subjected to the shown loading. The forces are…

Q: Q2(a) An I-beam with varying distributed loadings is shown in Figure 2(a). Solve for the equivalent…

Q: 2) For the Simply Supported Beam Carrying Four point loads, as shown in the Figure, (a)…

Q: Q.1) The beam ABC is supported by a cable at C and is subjected to two forces of 30 kN and 40 kN as…

Q: The weights and lengths of the two homogeneous beams that make up the structure are shown in the…

A: Equilibrium is a state of a body at which there is no disturbance in a system neither inside nor…

Q: he rigid beam ACE is fixed by both sides as shown in figure, if F1 = 300 kN and F2 = 150 kN. Find…

A: Given values Force F1=300 kN Force F2=150 kN Length of section AB is 180 mm Length of section BC is…

Q: Example: Determine the reactions at supports (A) and (B) for the beam loaded as shown in figure…

A: Given: Support reaction at point A is RA and Support reaction at point B is RBH, RBV. F = 73+30 =…

Q: A beam (AB) is attached to a roller at A and a pin at B. It is subjected to three concentrated…

Q: (2) Draw the shear force and bending moment diagrams for the beam ABCD shown in the figure below.…

Q: QUESTION 4 For the loaded structural beam shown in the Figure, the resultant support reaction at B…

Q: Find the support forces at Points A and B by showing the free body diagram in the simple beam given…

A: Convert the uniformly distributed load to a point load, P1=12 kN/m×4 m=48 kN Convert the uniformly…

Concept explainers

Bending Moment

In general, we can define the bending moment as the reaction induced when a certain amount of load or force is applied to an element which makes it bend.

Question

100%

The beam with the loading as shown in the figure is fixed at A and simply supported at B. Determine the magnitude of the reaction moment at A if the vertical
reactions forces at A and B are taken to be equal.
Take w = 3 kN/m, L1 = 9.6 m, L2 = 3 m and L3 = 6.8 m.
L1
L,

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A beam supporting a uniform load of intensity q throughout its length rests on pistons at points A, C and B (sec figure). The cylinders are filled with oil and are connected by a tube so that the oil pressure on each piston is the same. The pistons at A and B have diameter d1and the piston at C has diameter D2. (a) Determine the ratio of d2to d1so that the largest bending moment in the beam is as small as possible. Under these optimum conditions, what is the largest bending moment Mmaxin the beam? What is the difference in elevation between point C and the end supports?
Find expressions for shear force V and moment M at x = L/2 of beam BC. Express V and M in term s of peak load intensity q0and be a m length variable L.
The horizontal beam ABC of an oil-well pump has the cross section shown in the figure. If the vertical pumping force acting at end C is 9 kips and if the distance from the line of action ofthat force to point B is 16 ft, what is the maximum bending stress in the beam due to the pumping force?
A cylindrical brick chimney of height H weighs w = 825 lb/ft of height (see figure). The inner and outer diameters are d1= 3 ft and d2= 4 ft, respectively. The wind pressure against the side of the chimney is p = 10 lb/ft2 of projected area. Determine the maximum height H if there is to be no tension in the brickwork.
Find the support forces at Points A and B by showing the free body diagram in the simple beam given in the figure (The weight of the beam is neglected.) β : 70
The channel section carries a uniformly distributed load totaling 6W and two concentrated loads of magnitude W. (a) Calculate the distance of the neutral axis from the bottom of the channel and the moment of inertia about the neutral axis. (b) Determine the maximum allowable value for W if the working stresses are 40 MPa in tension, 80 MPa in compression, and 24 MPa in shear. Include A. Complete solution B. Free body diagram C. Shear diagram D. Moment diagram
The span and loading condition are given in the figure for normal strength (N), shear force (T) and Draw the bending moment (M) diagrams. L3(m)=1.0 , L4(m)=4.0 , P3(kN)=70, P4(kN)=48
Question 1: In the system shown in the figure, built-in support at point A, fixed support at point Bare available. Normal Force (N) that will occur in the system under a given external loading,Draw the Shear Force (T) and Bending Moment (M) diagrams.
Draw the shear force diagram and bending moment diagram for the loaded cantilever beam as shown in figure. Mark all salient point in the diagram. Neglect the self-weight of the beam. Where P=3m, Q=2m, R=3m, S=3m, F1=20 N, F2=10N, U=15N/m. (i) The reaction at A (unit is in N) = ___________ (ii)Shear force at "A" (Unit is in N) =_______________ (iii)Shear force at "B" (Unit is in N) =_______________ (iv)Shear force at "C" (Unit is in N) =_______________ (v) Shear force at "D" (Unit is in N) =_______________ (vi) Shear force at "E" (Unit is in N) =_______________ (vii) Bending moment at "E" (unit is Nm) = __________ (viii) Bending moment at "D" (unit is Nm) = __________ (ix) Bending moment at "C" (unit is Nm) = __________ (x) Bending moment at "B" (unit is Nm) = __________ (xi) Bending moment at "A" (unit is Nm) = __________
The overhang beam below is supported by a pin support at A and a roller at B. The weight of the beam is 600 N/m. Draw the Free Body Diagram for this beam and apply the equilibrium equation to find the value of support reactions.
Draw the shear force diagram and bending moment diagram for the loaded cantilever beam as shown in figure. Mark all salient point in the diagram. Neglect the self-weight of the beam. Where P=4m, Q=3m, R=4m, S=9m, F1=5 N, U=10N/m, F2=40N, (i) The reaction at A (unit is in N) = ___________ (ii)Shear force at "A" (Unit is in N) =_______________ (iii)Shear force at "B" (Unit is in N) =_______________ (iii)Shear force at "B" (Unit is in N) =_______________ (v) Shear force at "D" (Unit is in N) =_______________ (vi) Shear force at "E" (Unit is in N) =_______________ (vii) Bending moment at "E" (unit is Nm) = __________ (viii) Bending moment at "D" (unit is Nm) = __________ (ix) Bending moment at "C" (unit is Nm) = __________ (x) Bending moment at "B" (unit is Nm) = __________ (xi) Bending moment at "A" (unit is Nm) = __________
Find the support reacions and joint force of the construction shown on the figure, if; P=12 kN q=9 kN/m M=12 kN and L=2 m