The first figure gives spring force Fx versus position x for the spring-block arrangement of the second figure. The scale is set by F = 190 N. We release the block at x = 13.0 cm. How much work does the spring do on the block when the block moves from x, = +9.0 cm to (a) x = +5.0 cm, (b) x = -5.0 cm, (c) x = -9.0 cm, and (d) x = -11.0 cm? x (cm) -1 -F, Block attached to spring X-0 E-0 (a) positive F, negative

The first figure gives spring force Fx versus position x for the spring-block arrangement of the second figure. The scale is set by F = 190 N. We release the block at x = 13.0 cm. How much work does the spring do on the block when the block moves from x, = +9.0 cm to (a) x = +5.0 cm, (b) x = -5.0 cm, (c) x = -9.0 cm, and (d) x = -11.0 cm? x (cm) -1 -F, Block attached to spring X-0 E-0 (a) positive F, negative

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.5.29P: A polyethylene tube (length L) has a cap that when installed compresses a spring (with under-formed...

See similar textbooks

Similar questions

Solve the preceding problem for the following data: b = 8.0 in., k = 16 lb/in., a = 45°, and P = 10 lb.
A safety valve on the top of a tank containing steam under pressure p has a discharge hole of diameter d(see figure). The valve is designed to release the steam when the pressure reaches the value Pmax If the natural length of the spring, is L and its stiffness is k, what should be the dimension ft of the valve? (Express your result as a formula for h.)
The inclined ladder AB supports a house painter (85 kg) at C and the weight iq = 40 K/m} of the ladder itself. Each ladder rail (t5= 4 mm) is supported by a shoe (ts= 5 mm) that is attached to the ladder rail by a bolt of diameter d = 8 mm
A polyethylene tube (length L) has a cap that when installed compresses a spring (with under-formed length L1) by an amount ?? = (L1 = L). Ignore deformations of the cap and base. Use the force at the base of the spring as the redundant. Use numerical properties given in the boxes. (a) What is the resulting Force-in the spring, Fk? (b) What is the resulting Force in the tube, Ftl (c) What is the filial length of the tube, Lf? (d) What temperature change ?T inside the tube will result in zero force in the spring
A stepped shaft ABC consisting of two solid, circular segments is subjected to uniformly distributed torque t1acting aver segment 1 and concentrated torque t2applied at C, as shown in the figure. Segment 1 of the shaft has a diameter of d1= 57 mm and length of L1= 0.75 m; segment 2 has a diameter d2— 44 mm and length L2= 0.5 m. Torque intensity /,"= 3100 N . m/m and T2= 1100 N. m. (a) Find reaction torque TAat support A. (b) Find the internal torque T(x) at two locations: .x = L1/2 and at .x = L1+ L2/2. Show these internal torques on properly drawn free-body diagrams.
A small lab scale has a rigid L-shaped frame ABC consisting of a horizontal aim AB (length b = 30 cm) and a vertical arm BC (length c = 20 cm) pivoted at point B. The pivot is attached to the outer frame BCD that stands on a laboratory bench. The position of the pointer at C is controlled by two parallel springs, each having a spring constant k = 3650 N/m. that are attached to a threaded rod. The pitch of the threads is p = 1.5 mm. If the weight is 65 N. how many revolutions of the nut are required to bring the pointer back to the mark?
A bungee jumper having a mass of 55 kg leaps from a bridge, braking her fall with a long elastic shock cord having axial rigidity EA = 2.3 kN (see figure). If the jumpoff point is 60 m above the water, and if it is desired to maintain a clearance of 10 m between the jumper and the water, what length L of cord should be used?
A cable and pulley system in the figure part a supports a cage of a mass 300 kg at B. Assume that this includes the mass of the cables as well. The thickness or each of the three steel pulleys is t = 40 mm. The pin diameters are dPA= 25 mm, dB= 30 mm. and dc= 22 mm (see figure part a and part b). (a) Find expressions for the resultant forces acting on the pulleys at A, B. and C in terms of cubic tension T. (b) What is the maximum weight W that can be added to the cage at B based on the following allowable stresses? Shear stress in the pins is 50 MPa; bearing stress between the pin and the pulley is 110 MPa.
In the given fig shows the suspension system of a freight truck with a parallel-spring arrangement. Find the equivalent spring constant of the suspension if each of the three helical springs is made of steel with a shear modulus G = 120GPaand has five effective turns, mean coil diameter D = 50 cm, and wire diameter d = 5 cm
Under some circumstances, when two parallel springswith constants k1 and k2 support a single mass, theeffective spring constant of the system is given byk 4k1k2/(k1 + k2). A mass weighing 20 pounds stretchesone spring 6 inches and another spring 2 inches. Thesprings are first attached to a common rigid supportand then to a metal plate. As the figure illustrates(see image), the mass is attached to the center of the plate in the distributiondouble spring. Determine the constant of theeffective spring for this system. find the equationof motion if the mass is initially released fromequilibrium position with downward speed of2 ft/sec.
Under non-uniform and slippery road conditions, two forces (u and w), shown in the figure (image 1), are performed on the truck's rear wheels, which have a limited slip rear differential. Choose the alternatives that are true: (data: u = 92lbf and w =57lbf) (obs1.0: 1''= 1 in = 25,4mm) (obs2.0: 1lbf = 4,448N) a) the force vector resulting from the two forces is -149i [lbf] b) the resultant of the two forces has an intensity equal to 149lbf c) the ordinate of the point of intersection of the line of action of the resultant of this system of forces with the y axis is 7.05in d) adopting the counterclockwise direction as positive, the total moment of the two forces in relation to point g is equal to -1050lbf.in e) the total moment vector in relation to the G point is equal to -1050i [lbf.in]
1-) length L with mass m given in the figure on the sidemass M is connected to the end of the rod and has a coefficient of kit is connected with the spring on a fixed bearing. a-) giving the natural frequency of the system for the state in the figureget the statement. B-increase of spring coefficient like 0.5 k, 2k, 5k and / orhow does the natural frequency of the system decreasereferencesexternal links