The two solutions are contained (no dilution) in a single beaker with a saturated calomel electrode and an inertelectrode (e.g., Pt) immersed in the solution.Relevant information:Cr0,/Cr*:Fe*/Fe*:For SCE:E° = +1.33 VE° = +0,77 VErer +0.244 VCr,O, + 6Fe" +14H"2Cr + 6Fe* + 7H;0The reaction quickly reaches equilibrium. What is the potential of this cell?

Given: Two solution are contained in a single beaker with a saturated calomel electrode and an inert…

The two solutions are contained (no dilution) in a single beaker with a saturated calomel electrode and an inert electrode (e.g., Pt) immersed in the solution. Relevant information: CrO,/Cr*: Fe"/Fe*: For SCE: E° = +1.33 V E° = +0.77 V E,er +0.244 V Cr,O, + 6Fe**+14H 2Cr + 6Fe* + 7H,O Digtal mmeter dectta The reaction quickly reaches equilibrium. What is the potential of this cell?

The two solutions are contained (no dilution) in a single beaker with a saturated calomel electrode and an inert electrode (e.g., Pt) immersed in the solution. Relevant information: CrO,/Cr: Fe"/Fe: For SCE: E° = +1.33 V E° = +0.77 V E,er +0.244 V Cr,O, + 6Fe**+14H 2Cr + 6Fe* + 7H,O Digtal mmeter dectta The reaction quickly reaches equilibrium. What is the potential of this cell?

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter22: Bulk Electrolysis: Electrogravimetry And Coulometry

Section: Chapter Questions

Problem 22.22QAP

See similar textbooks

Similar questions

Use the shorthand notation to describe a cell consisting of a saturated calomel reference electrode and a silver indicator electrode for the measurement of (a) pSCN. (b) pI. (c) pSO3 (d) pPO. Then, generate an equation that relates pAnion to Ecell for each of the cells. (For Ag2SO3 Ksp = 1.5 * 10-14; for Ag3PO4, K,p = 1.3 *10-20 ).
What Range of cathode potentials versus the saturated calomel electrode can be used to quantitatively separate Ag+ and Ni2+ by electrolytic deposition? Assume that the sample solution is initially 0.1000M in each ion and the quantitative removal of an ion is realized when only 1 part in 10000 remains undeposited. ESCE = 0.244V E0Red (Ag+) = 0.8V E0Oxid (Ni) = -0.25V
Given the following: A cell SCE // Ag2CrO4 (saturated), CrO42- (xM) /AG is used for the determination of pCrO4- (ESCE = -0.244 V at 25 C). The half reaction at indicator electrode is: Ag2CrO4(s) + 2e-   2 Ag(s) + CrO42- (E0 = +0.446 V) What is pCrO4, given the cell potential of 0.402? What type of indicator electrode is Ag in this situation?
Give Reason? (i) Why is a high supporting electrolyte concentration used in most electroanalyticalprocedures?(ii) Why is the reference electrode placed near the working electrode in a threeelectrode cell?
In the analysis at 25 ° C of chloride using an ion selective electrode (ISE), two 100 mL solutions were prepared. These contain 1.0129x10-2 M and 1.01239x10-3 M Cl- and yielded a potential of 20.3 mV and 79.5 mV, respectively. The value of the electrode slope in mV is:
Is a quantitative separation of Zn2+ and Ag+ by electrolytic deposition feasible in principle? If so what range of cathode potential versus that saturated calomel electrode can be used? Assume that the solution is initially 0.1000M in each ion and that quantitative removal of an ion is realized when only 1 part in 1000 remains undeposited E0reduction of Zn2+ = -0.76V E0oxidation of Ag = -0.8V
A bare silver wire electrode is dipped into a solution 0.05M in KNO3 (supporting electrolyte) and saturated in AgBr (Ksp = 5.0 x 10-13), and connected to the back of an mV/pH meter along with a saturated calomel reference electrode. Calculate the potential of the silver indicator electrode. Calculate the cell potential.
You prepare a saturated LiF solution at room temperature and use a fluoride ion selective electrode to measure [F-] = 0.0429 M. What is the Ksp for this product?
Give the calomel electrode half cell diagram. What equailibria control the electrod potential of calomel electrode?
A 40.00-mL aliquot of 0.05000 M HNO2 is diluted to 75.00 mL and titrated with 0.0800 M Ce4+. The pH of the solution is maintained at 1.00 throughout the titration; the formal potential of the cerium system is 1.44V a. Calculate the potential of the indicator electrode with respect to a saturated calomel reference electrode after the addition of 5.00, 10.00, 15.00, 25.00, 40.00, 49.00, 49.50, 49.60, 49.70, 49.80, 49.90, 49.95, 49.99, 50.00, 50.01, 50.05, 50.10, 50.20, 50.30, 50.40, 50.50, 51.00, 60.00, 75.00 and 90.00 mL of Cerium (IV). b. Draw a titration curve for these data. c. Generate a first- and second-derivative curve for these data. Does the volume at which the second-derivative curve crosses zero correspond to the theoretical equivalence point? Why or why not?
(Please give clear handwritten answer) 0.1 M HNO3 solution at 298K was electrolyzed in Hittorf cell using platinum electrodes. After electrolysis, 34.2 mg of copper was deposited in coulometer which in series with the Hittorf cell. 50 mL of HNO3 solution was withdrawn from anode compartment after electrolysis and found to have a concentration of 0.0821 M. [Atomic mass Cu = 63]. (i) Find the transference number of H + and NO3 −. (ii) If 50 mL HNO3 solution was run off from cathode compartment, what would its concentration be?
A 0.2g sample of toothpaste containing fluoride was treated with 50 cm3 of a suitable buffer solution and diluted to 100 cm3. Using a fluoride ion-selective electrode, a 25.00 cm3 aliquot of this solution gave cell potentials of –155.3 mV before and –176.2 mV after spiking with 0.1 cm3 of a 0.5 mg/cm3 fluoride standard. Calculate the pF– corresponding to each cell potential and the percentage by weight of fluoride in the toothpaste.