I need a clear and fast answer within 20 minutes. Thank you the work done (W12) in (kJ)isBelow 10Between 10 and 30Between 30 and 50Between 50 and 70Above 70water, x₁ = 07P₁=PL = 200 kPaQ₁V₁= 100 LiterT2-200°C℃Piston-cylinder deviceOA piston-cylinder device contains water of quality x-0.7 and pressure 200 kPa with an initialvolume of 100 Liter. The system is now heated in isobaric process to a final temperature of200°C.O

Answered: Image /qna-images/answer/101a2f25-2306-40df-827a-1471d1bd0df1.jpg

the work done (W12) in (kJ) is Below 10 Between 10 and 30 Between 30 and 50 Between 50 and 70 O Above 70 A piston-cylinder device contains water of quality x-0.7 and pressure 200 kPa with an initial volume of 100 Liter. The system is now heated in isobaric process to a final temperature of 200°C. Piston-cylinder device, water, X₁ = 0.7 P₁-PL = 200 kPa Q₁V₁= 100 Liter T₂-200 °C

the work done (W12) in (kJ) is Below 10 Between 10 and 30 Between 30 and 50 Between 50 and 70 O Above 70 A piston-cylinder device contains water of quality x-0.7 and pressure 200 kPa with an initial volume of 100 Liter. The system is now heated in isobaric process to a final temperature of 200°C. Piston-cylinder device, water, X₁ = 0.7 P₁-PL = 200 kPa Q₁V₁= 100 Liter T₂-200 °C

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The water level in a tank is 10 m above the ground. A hose isconnected to the bottom of the tank, and the nozzle at the end ofthe hose is pointed straight up. The tank cover is airtight, andthe air pressure above the water surface is 202.65 kPag. Thesystem is at sea level. Determine the maximum height to which thewater stream could rise.
It is observed that water at 20°C rises up to 20 m height in a tree due to capillary effect. The surface tension of water at 20°C is ?s = 0.073 N/m and the contact angle is 20°. The maximum diameter of the tube in which water rises is (a) 0.035 mm (b) 0.016 mm (c) 0.02 mm (d) 0.002 mm (e) 0.0014 mm
Air is flowing through a horizontal variable area pipe at a constant rate of 0.03 m^3/s. Disregarding any frictional and compressibility effects, determine the pressure drop (delta P, in kPa) between two sections of diameters d1 = 6 cm and d2 = 3.25 cm. Take the air density to be 1.25 kg/m^3.
What is the viscous force on a wall where the velocity profile against the wall isu = 3(y²-0.04) where y = 0 at 0.2 m from the wall and y increases as it moves toward the wall.μ = 1.12 mPa·s
Freshwater and seawater flowing in parallel horizontalpipelines are connected to each other by a double Utubemanometer, as shown in Fig. P2–59. Determine the pressuredifference between the two pipelines. Take the density of seawaterat that location to be r = 1035 kg/m3. Can the air columnbe ignored in the analysis?
A 1.2 mm diameter tube is inserted into an unknown liquid whose density is 960 kg/m^3, and it is observed that the liquid rises 5 mm in the tube, making a contact angle of 15 degree. Determine the surface tension of the liquid. h = 5mm = 0.005m d = 12x10^-4m r = 6x10^-4m angle = 15 y = 960kg/m^3 = 9.414 kn/m^3
Fresh water and sea water flowing in parallel horizontal pipelines are connected to each other by a double U-tube manometer, as shown in the below figure. If hw = 0.65 m, hHg = 0.15 m, hair = 0.7 m, and hsea = 0.4 m, determine the pressure difference between the two pipelines. Take the densities of sea water, mercury, and water at that location to be ρsea = 1035 kg/m3, ρHg = 13,600 kg/m3, and ρw = 1000 kg/m3, respectively. (Round the final answer to two decimal places.) The pressure difference between the two pipelines is_____ kPa. Can the air column be ignored in the analysis?
A fluid, contained in a horizontal cylinder fitted with a frictionless leak proof piston, is continuously agitated by means of a stirrer passing through the cylinder cover. The cylinder diameter is 0.40 m. During the stirring process lasting 10 minutes, the piston slowly moves out a distance of 0.485 m against the atmosphere. The net work done by the fluid during the process is 2 kJ. The speed of the electric motor drivingthe stirrer is 840 rpm. Determine the torque in the shaft and the poweroutput of the motor.
The water is supplied at a pressure of 15 N/cm? to an accumulator, having a ram of diameter 2.0 m. If the total lift of the ram is 10 m, determine: (a) the capacity of the accumulator, and (b) total weight placed on the ram (including the weight of the ram). [Ans. (a) 4712.4 kNm, (b) 471240 N]
Water flows at a rate of 0.035 m3/s in a horizontal pipe whose diameter is reduced from 15 cm to 8 cm by a reducer. If the pressure at the centerline is measured to be 480 kPa and 457.3 kPa before and after the reducer, respectively, determine the pressure loss in the reducer. Take the density of water to be ρ = 1000 kg/m3 Ans: [22,300 Pa]
Water is flowing in a 90ο pipe with uniform cross section area of A=0.0083 m2. The velocity along the horizontal direction is v1=6.0 m/s. The pressure at the section 1 is p1=500kPa. Elevation difference and energy losses can be neglected. The density of water is ρ=1000kg/m3. An external force is needed to hold the pipe in equilibrium. (2) Select the correct expression of the external force component in the vertical direction Ry_________ A. B. C. D.
The 64-W fan in an aircraft environmental system is to circulate air through the ducting. An analysis of the flow shows that the fan needs to raise the pressure of air by 47 Pa to maintain flow. The fan is located in a horizontal duct with a circular cross-section whose diameter = 30 cm at both the inlet and the outlet. Determine the highest possible average flow velocity in the duct. Give your answer in m/s. Assume the fan operates steadily and that the changes in kinetic and potential energies across the fan are negligible. Note: I start this one by finding the volumetric flow rate from the work input and the pressure rise. Then I divide that by the cross-sectional area of the duct to get velocity.