The x-component of the electrostatic force in Newtons on charge 2 with q2=-1.5 μC from charge 1 with q₁=-4 μC arranged as shown in the figure equals: O -3.7 -7.3 O 11.0 14.6 O -18.3 4 cm 92 7cm 9₁

Which of the following distribution systems would you select for a medical research campus? A) Primary selective system. C) Secondary loop system. B) Distributed radial system. D) Primary and secondary loop system. Authoritative rules for electrical design and installation are contained in which of the following 7) documents? A) ASHRAE Handbook of Fundamentals. B) NFPA 101. C) NEC. The illumination from a point source 4 ft. above a surface is 100 foot-candles, and the surface is normal to the source. What will be the illumination level if the surface is tilted 45°? A) 50 foot-candles. B) 100 foot-candles. C) 71 foot-candles. Which of the following lamp types is generally the most energy efficient? A) Incandescent. C) High intensity discharge. B) LED. D) Fluorescent.

Please answer ASAP for like this please Asap for like this please... Please

Refer to the National Electrical Code® or the working drawings when necessary. Where applicable, responses should be written in complete sentences. For problems 1 and 2, six luminaires, similar to Style E used in the Commercial Building, are to be installed in a room that is 12 ft x 18 ft (~3.7 m x ~5.5 m) with a 9 ft (2.8 m) floor-to-ceiling height. The spacing ratio for the luminaire is 1:0. 1. The maximum distance that the luminaires can be separated and achieve uniform illuminance is ft ( m). For problems 2-5, two luminaires, 8 ft (2.5 m) and 4 ft (1.2 m) in length with dimensions as shown in Figure 15-7, are to be installed in tandem (end to end). The end of the long luminaire is to be 2 ft (600 mm) from the wall. 2. The center of the outlet box should be roughed in at ft ( m) from the wall. 3. The first support should be installed at the wall. ft ( m) from 4. The second support should be installed at from the wall. ft ( m) 5. The final support should be installed at the wall. ft…