Answered: ure. The bending moment at 0.5 m from…

Engineering

Mechanical Engineering

ure. The bending moment at 0.5 m from the support is approximately

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.13.3P: A rectangular beam with semicircular notches, as shown in part b of the figure, has dimensions h =...

See similar textbooks

Related questions

Q: What is the largest bending stress, Fb , for the beam cross-section shown when M= 1480k-ft and…

A: Given data: Ix=68101 in4M=1480 k-ft Need to determine the largest bending stress.

Q: From the options below, choose the diagram that best represents the internal bending moment…

Q: Using the area method, draw the shear force and bending moment diagrams for the beam. Don't think…

Q: C8-49 A 500-lb load is supported by a roller on a beam as shown in Fig. Plot |Mmax, the maximum…

A: Free-body diagram of beam is given as, On using force equilibrium in vertical direction, On using…

Q: The beam is subjected by Mo and P. Compute the maximum absolute value of the bending moment.…

Q: Calculate the maximum displacement (U max), the maximum bending moment Mmax, and the maximum stress…

Q: The internal bending moment at point B (in N.M) is 200 N/m A IB – 3 m- -3 m-

A: Let's mark the points B, C, D, E, G as shown in below figure. Let's make a section S-S at B to find…

Q: Drawing the shear force and bending moment diagrams of the beam

Q: Draw shear force digam and bending moment digram for the following beam 300 N 500 N 800 N to to 0.5…

A: A cantilever support will exert horizontal component of reaction, vertical component of reaction and…

Q: Tor each segment of the beam, lerive the shear force and bending noment values.

Q: a)A simply supported beam of length 6 m ,carries point load of 3 kN 4 m from the left end. Draw the…

Q: 6. Plot the bending moment diagram for the multi-span beam without calculating the support…

A: To draw the BMD we need to calculate BM at different points as mentioned below...

Q: The change in moment is equal to Select one: a. bending moment b. total weight C. Area under the…

A: To fill the blank for the question The change in moment is equal to Option given are a. bending…

Q: Find themaximum bending moment in N.m? y 14 kN 28 kN 2 m -3 m -2 m B (2) 3. RA Rp

Q: The simply supported beam with following cross section is loaded with concentrated loads and uniform…

Q: Draw shear diagram and bending moment diagram and include specific points in the graph. (max. moment…

A: Given

Q: 8 FBD carryT Draw the shear force and bending moment diagrams for this beam 300 tb /ft 150 lb/ft -12…

A: Given simply supported beam with uniformally distributed load condition

Q: Construct the bending Moment (M) and Shearing force diagram for the beam. (Very detailed…

A: The loading diagram of the beam is where, RA and RB are the reaction forces at A and B

Q: Draw the shear force and bending moment diagrams of the beam shown and find the bending moment M in…

Q: Draw shear and bending moment diagrams for the beamin Figure 3.14b, which carries a uniformly…

A: givencantilever beam as shown below

Q: 59-35N 20 5OMM 100MM 100m

A: Assuming the beam to be cantilever because there is only one reaction at one end.

Q: load of 30kN/m. The second and fourth spans remain unloaded. Calculate the bending moments at B and…

Q: Find the lightest W-shape for the beam shown if the working stress in bending is 20 Ksi. What is the…

A: A moment is a movement of the body when a body is rotating on an axis. The moment is also known as…

Q: The magnitude of the bending moment acting on the circular cross section of a beam is M = 55,000 lb…

A: The bending stresses at D is 18055.22 psi.

Q: 180 lb/ft 4 in. LA B 8 in. 12 ft | 1200 1b

A: Given, b = 4 in d = 8 in To find maximum bending stress, we will need to find maximum bending…

Q: What is the reaction at A? Compute the maximum bending stress in the beam. Compute the bending…

Q: Calculate the maximum normal bending stress and the maximum shear stress

A: To find: The maximum bending stress and maximum shear stress Given:

Q: Write shear and bending moment equation and draw it for beam loading as shown in Fig. below: 4 kN m…

A: As per the guidelines of BARTLEBY we are subjected to solve only one question at a time. Please…

Q: = Draw the shear and bending moment diagram, where p 8 kip.

Q: PII-4 In cach case, show how the bending stress acts on a differential volume element located at…

A: Understand that the bending stress are normal to the cross section and along the axis of the beam.…

Q: 4 kN 4 kN/m 10 kN.m to A D E 3 m→|-2 m-|<-3 m→|-2 m-

A: The reaction forces calculated as :…

Q: 4 KN/m - 2 m 2 m 2 m

A: For this question we have to draw bending moment diagram and shear force diagram also. One…

Q: What does the application of the moment area method require?

A: This is also known as Mohr's theorem. The moment area method is used to find the deflection of the…

Q: FII-10. If the beam is subjected to a bending moment of M = 50 kN - m, sketch the bending stress…

A: Given Data: The height of the triangular cross-section is h = 300 mm. The base of the triangular…

Q: Draw the bending moment and shear diagrams for bar CD of the structure below.

Q: 20 kN/m

A: solution of above problem is below:

Q: A beam has a rectangular cross section 80 mm wide and 120 mm deep. It is subjected to a bending…

Q: Determine the normal force, shear force, and bending moment BY USING THE LEFT SIDE at C of the beam…

A: Weight of the load, W=12×1200×3=1800N it acts 1m from the A points ∑Fx=0RAH=0∑Fy=0RAV=1800N Hence…

Q: Plot the bending moment ond shear force iagrons. . 9=80000N(m 9,=120000m

Q: Draw the shear and moment diagram. Find the maximum bending stress and its location.

A: Answer: The maximum bending stress is 3600 lb/in2 (location: At bottom face of web located at point…

Q: You need to determine the distribution af the bending moment and the stress due to bending as well…

A: Calculate the reaction at the end of the support of the beam, Since the loads are symmetrical so…

Q: Where does the Maximum Internal Moment occur?

A: The maximum internal moment is the moment that occurs at maximum stress in the beam. It is indicated…

Q: Draw shear force diagram, bending moment diagram for the beam as shown. Also, sketch the…

Q: Ex.1 Shear force and bealing moment Draw B. By

Q: Determine the maximum bending stress in the steel beam with the circular cross section. Show: A.…

A: To find: The shear force and bending moment diagram. FBD: The free body diagram shown below:

Q: Find maximum bending stress and its location, bending stress at a point 20mm from the top of the…

Q: Find the bending stress at point B located at mid-span of the rod 5 N/m O.Scm Ø 2 cm 0.5m. Tm 16 N

A: Consider horizontal forward & vertically upward force as (+)ve and vertically downward force as…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

A cantilever beam is loaded as shown in the figure. The bending moment at 0.5 m from the support is approximately:
4.5 kN
1.8 kN/m
|A
В
-1.0 m-1.0 m→-
3.0 m
A. -12.7 kN-m
B. -18.5 kN-m
C. -14.2 kN-m
D. -16.1 kN-m

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The hollow box beam shown in the figure is subjected to a bending moment M of such magnitude that the flanges yield but the webs remain linearly elastic. (a) Calculate the magnitude of the moment M if the dimensions of the cross section are A = 15 in., A] = 12.75 in., h = 9 in., and ey =7.5 in. Also, the yield stress is eY = 33 ksi. (b) What percent of the moment M is produced by the elastic core?
.2 A ligmio.irc ii supported by two vorlical beams consistins: of thin-walled, tapered circular lubes (see ligure part at. for purposes of this analysis, each beam may be represented as a cantilever AB of length L = 8.0 m subjected to a lateral load P = 2.4 kN at the free end. The tubes have a constant thickness ; = 10.0 mm and average diameters dA = 90 mm and dB = 270 mm at ends A and B, re s pec lively. Because the thickness is small compared to the diameters, the moment of inerlia at any cross section may be obtained from the formula / = jrrf3;/8 (see Case 22, Appendix E); therefore, the section modulus mav be obtained from the formula S = trdhlA. (a) At what dislance A from the free end docs the maximum bending stress occur? What is the magnitude trllul of the maximum bending stress? What is the ratio of the maximum stress to the largest stress (b) Repeat part (a) if concentrated load P is applied upward at A and downward uniform load q {-x) = 2PIL is applied over the entire beam as shown in the figure part b What is the ratio of the maximum stress to the stress at the location of maximum moment?
A simple beam with a W 10 x 30 wide-flange cross section supports a uniform load of intensity q = 3.0 kips/ft on a span of length L = 12 ft (sec figure). The dimensions of the cross section are q = 10.5 in., b = 5.81 in., t1= 0.510 in., and fw = 0.300 in. Calculate the maximum shear stress tjuly on cross section A—A located at distance d = 2.5 ft from the end of the beam. Calculate the shear stress rat point Bon the cross section. Point B is located at a distance a = 1.5 in. from the edge of the lower flange.
The cross section of a rectangular beam having a width b and height h is shown in part a of the figure. For reasons unknown to the beam designer, it is planned to add structural projections of width b/9 and height d/9 the top and bottom of the beam (see part b of the figure). For what values of d is the bending-moment capacity of the beam increased? For what values is it decreased?
Beam ACB hangs from two springs, as shown in the figure. The springs have stiffnesses Jt(and k2^ and the beam has flexural rigidity EI. What is the downward displacement of point C, which is at the midpoint of the beam, when the moment MQis applied? Data for the structure are M0 = 7.5 kip-ft, L = 6 ft, EI = 520 kip-ft2, kx= 17 kip/ft, and As = 11 kip/ft. Repeat part (a), but remove Af0 and instead apply uniform load q over the entire beam.
A two-axle carriage that is part of an over head traveling crane in a testing laboratory moves slowly across a simple beam AB (sec figure). The load transmitted to the beam from the front axle is 2200 lb and from the rear axle is 3800 lb. The weight of the beam itself may be disregarded. Determine the minimum required section modulus S for the beam if the allowable bending stress is 17,0 ksi, the length of the beam is 18 ft, and the wheelbase of the carriage is 5 ft. Select the most economical I-beam (S shape) from Table F-2(a), Appendix F.
A beam of wide-flange shape, W 8 x 28, has the cross section shown in the figure. The dimensions are b = 6.54 in., h = 8.06 in., fw = 0.285 in., and tf = 0.465 in.. The loads on the beam produce a shear force V = 7.5 kips at the cross section under consideration. Use center line dimensions to calculate the maximum shear stress raiaxin the web of the beam. Use the more exact analysis of Section 5,10 in Chapter 5 to calculate the maximum shear stress in the web of the beam and compare it with the stress obtained in part .
A weight W = 4000 lb falls through a height h = 0.5 in, onto the midpoint of a simple beam of length L = 10 ft (see figure). Assuming that the allowable bending stress in the beam is = 18,000 psi and E = 30 x 10* psi, select the lightest wide-flange beam listed in Table F-l(a) in Appendix F that will be satisfactory.
A hollow box beam with height h = 16 in,, width h = 8 in,, and constant wall thickness r = 0.75 LiL is shown in the figure. The beam is constructed of steel with yield stress ty = 32 ksi. Determine the yield moment My, plastic moment A/p, and shape factor.
A W 12 x 50 steel wide-flange beam and a segment of a 4-inch thick concrete slab (see figure) jointly resist a positive bending moment of 95 kip-ft. The beam and slab are joined by shear connectors that are welded to the steel beam. (These connectors resist the horizontal shear at the contact surface.) The moduli of elasticity of the steel and the concrete are in the ratio 12 to 1. Determine the maximum stresses r1 and xtin the steel and concrete, respectively. Note: See Table F-l(a) of Appendix F for the dimensions and properties of the steel beam.
The cantilever beam AB shown in the figure is an S6 × 12.5 steel I-beam with E = 30 × 106 psi. The simple beam DE is a wood beam 4 in. x 12 in. (nominal dimensions) in cross section with E = 1.5 x 106 psi. A steel rod AC of diameter 0.25 in., length 10 ft, and E = 30 x 106 psi serves as a hanger joining the two beams. The hanger fits snugly between the beams before the uniform load is applied to beam DE. Determine the tensile force Fin the hanger and the maximum bending moments MABand MDEin the two beams due to the uniform load, which has an intensity q = 400 lb/ft. Hint: To aid in obtaining the maximum bending moment in beam DE, draw the shear-force and bending-moment diagrams.
The cross section of a sandwich beam consisting of fiberglass faces and a lightweight plastic core is shown in the figure. The width b of the beam is 50 mm, the thickness I of the faces is 4 mm, and the height hcof the core is 92 mm (total height A = 100 mm). The moduli of elasticity are 75 GPa for the fiberglass and 1.2 GPa for the plastic. A bending moment M = 275 N · m acts about the z axis. Determine the maximum stresses in the faces and the core using (a) the general theory for composite beams and (b) the approximate theory for sandwich beams.