Water discharge from a pipe of diameter 0.05 m into a tank for exactly 11 min. Knowing that the increased in the tank weight is 18 kN. Water density is 1000 kg/m, g= 9.81 m/s?. Answer the following: What is the mass flow rate of water into the tank (kg/min). What is the discharge of water into the tank in cubic meters per minute.

Water discharge from a pipe of diameter 0.05 m into a tank for exactly 11 min. Knowing that the increased in the tank weight is 18 kN. Water density is 1000 kg/m, g= 9.81 m/s?. Answer the following: What is the mass flow rate of water into the tank (kg/min). What is the discharge of water into the tank in cubic meters per minute.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air enters a fan through a duct at a velocity of 6.3 m/s and an inlet static pressure of 2.5 cm of water less than atmospheric pressure. The air leaves the fan through a duct at a velocity of 11.25 m/s and a discharge static pressure of 7.62 cm of water above the atmospheric pressure. If the specific weight of the air is 1.2 kg/m3 and the fan delivers 9.45 m3/s, what is the fan efficiency when the power input is 13.75 kW at the coupling?
Due to surface tension , water from faucet tapers from a diameter of 0.5 in to 0.3 in. after falling 10 in. Determine the mass flow rate in slugs/second. a. 0.0035 b. 0.114 c. 1.12 d. 0.00747
1) Interpret solar power in the context of environmental impact.2. What is the rigid dichotomy between windmill and diesel-driven pumps?3. For a normal windmill-driven pump at 3 m/s wind speed, the yield at a 10 m Head is typically 0.12 liters/s per m2 of rotor area, value windmills in the context of yield.
3. In a refinery, certain oil with sp.gr 0.9 flows with a velocity of 2 m/s in a pipe of diameter 30cm. Along the flow, the pipe diameter gets reduced to 25 cm. Determine the velocity and mass flow rate of oil at this section. 4. A circular pipe of uniform diameter 500mm carries water under pressure 30 N/cm2 . The mean velocity of water at the inlet (at the datum) is 2.0 m/s. Find the total head or total energy per unit weight of the water at a cross-section, which is 5 m above the datum line. 5. A tapered pipe, through which water is flowing, is having diameter, 30cm and 20 cm at the cross-sections 1 and 2 respectively. The velocity of water at section 1 is given as 3.5m/s. Find the velocity head at section 1 and 2 and also rate of discharge. 6. Water is flowing through a pipe having diameter 300mm and 200 mm at the bottom and upper end respectively. The pressure at the lower(bigger) end is 25 N/cm2 and the pressure at the upper end is 10 N/cm2. Determine the difference in datum…
11. Water flows through a constricted pipe at a uniform rate. At one point, the diameter of the pipe is 43mm and the pressure is 8.3 x 10 4N/m2. At another point, 1 m higher than the previous point, the diameter is 17 mm and the pressure is 2.7 x 104 N/m2 . Calculate the velocities at the lower section and the upper section. Also calculate the rate of flow. Density of water = 1000 kg/m3.
Three immiscible fluiids are contained in a tank: 1.0 m of water, 1.20 m of oil (s= 0.80) and air under a pressure of 16 kPa. The tank is closed and has a height of 3.0 m and diameter of 1.0 m. Find the theoretical velocity throught a 5 cm diameter orifice located 30 cm above the bottom of the tank.CHOICES: a.10.34 m/s b.15.8 m/s c.12.56 m/s d.8.03 m/s
Air enters a fan through a duct velocity of 6.3 m/s and an inlet static pressure of 2.5cm of water less than the atmospheric pressure. The air leaves the fan through the duct at a velocity of 11.25 m/s and a discharge pressure of 7.62cm of water above the atmospheric pressure. If, the density of the air is 1.2kg/m3and the fan delivers 9.45m3/s, what is the fan efficiency when the power input to the fan is 13.75 kW at the coupling. Show schematic diagram and provide solutions.
A Francis radial-flow hydroturbine has the following dimensions, where location 2 is the inlet and location 1 is the outlet: r2 = 6.60 ft, r1 = 4.40 ft, b2 = 2.60 ft, and b1 = 7.20 ft. The runner blade angles are ?2 = 82° and ?1 = 46° at the turbine inlet and outlet, respectively. The runner rotates at n. = 120 rpm. The volume flow rate at design conditions is 4.70 ×106 gpm. Irreversible losses are neglected in this preliminary analysis. Calculate the angle ?2 through which the wicket gates should turn the flow, where ?2 is measured from the radial direction at the runner inlet. Calculate the swirl angle ?1, where ?1 is measured from the radial direction at the runner outlet. Does this turbine have forward or reverse swirl? Predict the power output (hp) and required net head (ft).
Water of density ? =998.2kg/m3 flows through a fireman’s nozzle—a converging section of pipe that accelerates the flow. The inlet diameter is d1 = 0.100 m, and the outlet diameter is d2 = 0.050 m. The average velocity, momentum flux correction factor, and gage pressure are known at the inlet (1) and outlet (2). (a) Write an expression for the horizontal force Fx of the fluid on the walls of the nozzle in terms of the given variables. (b) Verify your expression by plugging in the following values: ?1 = 1.03, ?2 = 1.02, V1 = 3 m/s, P1,gage = 137,000 Pa, and P2,gage = 0 Pa.
A Francis radial-flow hydroturbine has the following dimensions, where location 2 is the inlet and location 1 is the outlet: r2 = 2.00 m, r1 = 1.30 m, b2 = 0.85 m, and b1 = 2.10 m. The runner blade angles are ?2 = 71.4° and ?1 = 15.3° at the turbine inlet and outlet, respectively. The runner rotates at n. = 160 rpm. The volume flow rate at design conditions is 80.0 m3/s. Irreversible losses are neglected in this preliminary analysis. Calculate the angle ?2 through which the wicket gates should turn the flow, where ?2 is measured from the radial direction at the runner inlet. Calculate the swirl angle ?1, where ?1 is measured from the radial direction at the runner outlet. Does this turbine have forward or reverse swirl? Predict the power output (MW) and required net head (m).
A hotel builds a water fountain that is fed by a 16.0 cm diameter cylindrical pipe that carries water horizontally 9.00 m below the ground. The pipe turns upward and eventually fires water out of the 6.00 cm diameter end of the cylindrical pipe, which is located 2.00 m above the ground, with speed 32.0 m/s. (a) What is the speed of the water in the underground horizontal pipe? (b) What gauge pressure (in atm) is required in the underwater horizontal pipe for this fountain? (c) How many liters of water does this fountain release for every minute?
A centrifugal blower rotates at 1400 rpm. Air enters the impeller normal to the blades (?1 = 0°) and exits at an angle of 25° (?2 = 25°). The inlet radius is r1 = 6.5 cm, and the inlet blade width b1 = 8.5 cm. The outlet radius and blade width are r2 = 12 cm and b2 = 4.5 cm, respectively. The volume flow rate is 0.22 m3 /s. What is the net head produced by this blower in meters of air? (a) 12.3 m (b) 3.9 m (c) 8.8 m (d) 5.4 m (e) 16.4 m