wo turbo alternators with ratings given below are interconnected via a short transmission line. Machine 1: 2 pole, 50Hz, 60MW, power factor 0.8 lagging, moment of inertia 40000 kg-m2 Machine 2 : 4 pole, 50Hz, 80MW, power factor 0.85 lagging, moment of inertia 20,000kg-m2 Calculate the inertia constant of the single equivalent machine on a base of 150 MVA.

wo turbo alternators with ratings given below are interconnected via a short transmission line. Machine 1: 2 pole, 50Hz, 60MW, power factor 0.8 lagging, moment of inertia 40000 kg-m2 Machine 2 : 4 pole, 50Hz, 80MW, power factor 0.85 lagging, moment of inertia 20,000kg-m2 Calculate the inertia constant of the single equivalent machine on a base of 150 MVA.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.21P: An industrial plant consisting primarily of induction motor loads absorbs 500 kW at 0.6 power factor...

See similar textbooks

Similar questions

A ___2___ pole, ___50___Hz, 11kV turbo alternator has a rating of ___160___MW, power factor of ___0.82___ lagging. The rotor has moment of inertia of ____16000____kg-m2. Calculate (i) Energy stored in the rotor (ii) Inertia constant H and (iii) Angular momentum in mechanical radians and electrical radians and electrical degrees and per unit radian and degrees
If the Reactance of the cylindrical rotor machine connected to an infinite bus bar is double that of the external reactance of 0.5.p.u. If the power angle is 35°, real power output is 0.8, compute the excitation voltage, and for the same power output, if the load angle is reduced by 10 degrees, find the external reactance to achieve this.
Two generators rated at 2 pole,50 Hz 80 Mw 0.8 pf lag with moment of inertia40000 kg-m2 and 50 Hz, 100 Mw 0.8 pf lag with moment of inertia 10,000kgm2 are connected by a transmission line. Find the inertia constant of eachmachine and the inertia constant of single equivalent machine connected toinfinite bus. Take 100 MVA base.
A simple power system is shown in this Fig. The generator (480 V, 10 kVA) is connected to an ideal step-up transformer (1:10), a transmission line (R=20 Ohm and X=60 Ohm), step down transformer (20:1) and a load with magnitude Z=10 Ohm and angle =30 degree the base values for this system are chosen to be 480 V and 10 kVA at the generator. Calculate the per-unit impedance of the load. Calculate the per-unit real power absorbed by the load Select one: a. 0.487 b. None of the above c. 0.057 d. 1.253
A 4400V, 3-ph, Y- connected synchronous motor has an effective resistance and synchronous reactance of 3Ω and 19Ω per phase respectively. If the open–circuit generated emf is 4800V between lines, calculate The current .........amper *P.F at Maximum mechanical powerTotal Cu losses.........watt *Input power to motor
A 2 pole, 50Hz, 11kV turbo alternator has a rating of 100MW, power factor of 0.7 lagging. The rotor has moment of inertia of 10000kg-m2. Calculate (i) Energy stored in the rotor (ii) Inertia constant H and (iii) Angular momentum in mechanical radians and electrical radians and electrical degrees.
The wind turbine gives the following data: Blade length, l = 49 m, Wind speed, V= 32 Km/Hr, Air density, ρ = 1.23 kg/m3 , Power Coefficient, Cp = 0.4, Calculate the power available in the rotor in Watts. 60772464.72 W 394985.47 W 1302564.83 W 151931161.80 W
Suppose you have to install a Diesel power station with data given below: Parameter Data Number of Generating Units 4 Capacity of Each of 1st Three Units 600 kW Capacity of 4th Unit 400 kW Engine Type 4 stroke 300 rpm, airless-injection type Max. Demand of Station 2500 kW at 0.8pf lagging Average Load Factor of Station 65% Annual Capacity Factor 55% Energy Generated per Unit 2.39 kWh/kg Weight of Fuel Not specified in the provided data Generator Efficiency 90% Salaries/Wages & Operational Costs Rs. 600,000 per annum Total Maintenance Costs Rs. 330,000 per annum (1/3rd fixed, 2/3rd variable) Consumption of Lubricating Oil 1 kg for every 450 kWh Cost of Fuel Oil Rs.40/kg Cost of Lubricating Oil Rs.120/kg Cost of Power-Plant/KW Installed Rs. 95000 Insurance and Taxes 3% of the initial/capital cost of Plant Interest on Investment 7% of the initial cost of Plant Depreciation of Plant 8% of the initial cost of Plant Investigate the…
A 4-pole, 50 Hz, 22 kV turboalternator has a rating of 288.6 MVA, p.f. 0.8 lag. The inertia constant is 9 MJ/MVA. Find the value of moment of inertia.
15.2 Estimate the total land requirements for wind farms generating an amount of electric energy equal to 2008 US annual consumption (4.4 × 10 12 kW e h) if individual units are rated at 2 MW e , have a rotor with a 100 m diameter, and are spaced 3 diameters side to side, 10 diameters front to rear in giant contiguous wind farms having an annual average capacity factor of 25%. Compare the required area to that of North and South Dakota (combined land area of 145,000 square miles), which have some of the best US wind resources. Discuss the factors that would favor or impede the practical implementation of a Grand Midwestern Wind Farm plan to provide the bulk of US electric energy by the year 2050.
A simple power system is shown in this Fig. The generator (480 V, 10 kVA) is connected to an ideal step-up transformer (1:10), a transmission line (R=20 Ohm and X=60 Ohm), step down transformer (20:1) and a load with magnitude Z=10 Ohm and angle =30 degree the base values for this system are chosen to be 480 V and 10 kVA at the generator. Calculate the per-unit impedance of the load. Select one: a. 1736 (45 degree) Ohm b. 36 (90 degree) Ohm c. 1.736 (30 degree) Ohm d. None of the above
ELECTRICAL MACHINES 2. The synchronous reactance of a three-phase, star connected, 380 V, 50 Hz, cylindrical alternator with 2 poles is Xs = 1.5 Ω/ phase. This alternator is connected to an infinite bus. As the alternator powers the bus with 100 kW, the angle between the induced voltage and the terminal voltage is δ= 25,09 °. Find the following for this alternator with neglected losses. A) The torque applied to the shaft of the alternator b) The induced voltage in the alternator c) The active and reactive components of the apparent power AND The power coefficient AND The rotation speed of the alternator.