Chapter 12, Problem 12.14P

A retaining wall 7 m high, with its back face smooth and vertical. It retains sand with its surface horizontal. Using Rankine’s theory, determine the active earth pressure at the base when the backfill is dry. Take γ=18 kN/m^3 ,ϕ=30°, γ_sat=21 kN/m^3.

A 8-meter-high retaining wall, with a perpendicular back, retains the soil with a unit weight of 17.17 kN/m3. The cohesion and the internal friction angle of the backfill were measured as 13 kPa and 20°, respectively. Assume that there is no friction on the wall and the surface of the backfill is horizontal. Calculate the expected active force on the wall and the position of this force.

A retaining wall 7 m high, with its back face smooth and vertical. It retains sand with its surface horizontal. Using Rankine’s theory, determine the active earth pressure at the base when the backfill is saturated. Take γ=18 kN/m^3 ,ϕ=30°, γ_sat=21 kN/m^3.

Determine the total active thrust, in kN/m, for a retaining wall (height 5.60 m) with horizontal backfill given the following properties: Unit weight = 17.42 kN/m3, angle of internal friction = 32 degrees, Cohesion = 11.76 kPa, Surcharge = 9.32 kPa.

(Solve the following exercise, showing and explaining step by step to its resolution). An 8.50 m high retaining wall is built to support a sandy silt with a volumetric weight of 1850 kg/m3 and an angle of internal friction of 28°. The silt also has a cohesion of 1300 kg/m2. The ground surface is horizontal. The effect of the friction of the wall is neglected. Determine the pressure at the base of the screen.

A retaining wall supports a horizontal backfill that is composed of two types of soil. First layer: 4.27 meters high, Unit weight of 17.25 kN/m3, coefficient of active pressure of 0.286 Second layer: 6.27 meters high, Unit weight of 18.27 kN/m3, coefficient of active pressure of 0.309 Determine the distance of the total active force measured from the bottom of the wall. Round off to three decimal places.

a retaining wall supports a horizontal backfill that is composed of two types of soil.  first layer: 4.92 meters high, Unit weight of 16.29 kN/m^3, coefficient of active pressure of 0.296 second: 6.85 meters high, Unit weight of 18.31 kN/m^3, coefficient of active pressure of 0.302 determine the distance of the total active force measured from the bottom of the wall

In Fig. 1 a retaining wall has a vertical back and is 8 m high. Determine the magnitude and the location the resultant of active force per unit meter with plot the diagram of active earth pressure. Neglecting the effect of wall friction. plot the diagram of active earth pressure

Determine the active Rankine earth pressure (magnitude and location) against the 1-foot thick retaining wall in the figure at right.