Vector Mechanics for Engineers: Statics
Vector Mechanics for Engineers: Statics
12th Edition
ISBN: 9781259977268
Author: Ferdinand P. Beer, E. Russell Johnston Jr., David Mazurek
Publisher: McGraw-Hill Education
bartleby

Concept explainers

bartleby

Videos

Textbook Question
Book Icon
Chapter 5.3, Problem 5.83P

The base of a dam for a lake is designed to resist up to 120 percent of the horizontal force of the water. After construction, it is found that silt (that is equivalent to a liquid of density ρs = 1.76 × 103 kg/m3) is settling on the lake bottom at the rate of 12 mm/year. Considering a 1-m-wide section of dam, determine the number of years of service until the dam becomes unsafe.

Chapter 5.3, Problem 5.83P, The base of a dam for a lake is designed to resist up to 120 percent of the horizontal force of the

Fig. P5.82 and P5.83

Expert Solution & Answer
Check Mark
To determine

How many years does the dam becomes unsafe?

Answer to Problem 5.83P

The dam becomes unsafe in is service until 282years.

Explanation of Solution

Sketch the free body diagram of the dam as shown in the Figure 1.

Vector Mechanics for Engineers: Statics, Chapter 5.3, Problem 5.83P

Write the equation for the pressure.

P=FA (I)

Here, the pressure is P, force exerted on the dam is F, and the area of the dam is A

Write the equation for force exerted on the dam without the silt.

Pw=12Apw (II)

Here, the force exerted on the dam is Pw, area of the dam is A, and the pressure of the horizontal force of the water is pw.

Write the equation for gage pressure in a liquid.

pw=ρgh

Here, the density of the water is ρ, aceeleration due to gravity is g, and the height of the dam is h.

Replace lb for A and ρgh for pw in equation (II).

Pw=12(lb)ρgh (III)

Here, the length of the dam is l, breadth of the dam is b, aceeleration due to gravity is g, and the height of the dam is h.

Substitute 6.6m for l, 1m for b, 9.81m/s2 for g, 1000kg/m3 for ρ, and 6.6m for h in equation (III).

Pw=12[(6.6m)(1m)](1000kg/m3)(9.81m/s2)(6.6m)=213661.8N

Write the equation for 120 percentage of resisting force exerted on the dam.

Pr=1.2Pw

Here, the resisting force exerted on the dam is Pr.

Substitute 213661.8N for Pw in above equation to solve for Pr.

Pr=1.2(213661.8N)=256394.16N

Write the equation for force exerted on the dam after a depth that the silt has settled.

Pw=12(ld)(b)ρg(hd) (IV)

Here, force exerted on the dam after silt is settled is Pw and distance of the silt settled in the dam is d.

Substitute 6.6m for l, 1m for b, 9.81m/s2 for g, 1000kg/m3 for ρ, and 6.6m for h in equation (IV).

Pw=12[(6.6md)(1m)][(1000kg/m3)(9.81m/s2)(6.6d)m]=4905(6.6d)2N

Write the equation for pressure force exerted on the dam above the silt at region I

(Refer fig 1).

PI=dbρg(hd) (V)

Here, force exerted on the dam above the silt at region I is PI and width of the dam is b.

Substitute 1m for b, 9.81m/s2 for g, 1000kg/m3 for ρ, and 6.6m for h in equation (V).

PI=[d(1m)][(1000kg/m3)(9.81m/s2)(6.6d)m]=9810(6.6dd2)N

Write the equation for pressure force exerted on the dam surface of the silt at region II

(Refer fig 1).

PII=12(db)ρsg(d) (VI)

Here, force exerted on the surface of the silt at region II is PII and density of the silt is ρs.

Substitute 1m for b, 9.81m/s2 for g, and 1.76×103kg/m3 for ρs in equation (VI).

PII=12[d(1m)][(1.76×103kg/m3)(9.81m/s2)(d)m]=(8632.8d2)N

The net force exerted on the dam on both the regions is,

P=Pw+PI+PII (VII)

Here, the net force exerted on the dam is P.

Conclusion:

Substitute 4905(6.6d)2N for Pw, 9810(6.6dd2)N for PI, and (8632.8d2)N for PII in Equation (VII).

P=4905(6.6d)2N+9810(6.6dd2)N+(8632.8d2)N=[4905(43.5613.2d+d2)+9810(6.6dd2)+(8632.8d2)]N=[213661.864746d+4905d2+64746d9810d2+8632.8d2]N=[3727.8d2+213661.8]N

The net force exerted on the dam is equal to the resisting force exerted on the dam.

P=Pr

Substitute [3727.8d2+213661.8]N for P and 256394.16N for Pr in above Equation.

[3727.8d2+213661.8]N=256394.16N3727.8d2=256394.16N213661.8N3727.8d2=42732.2

Solve the above equation for d

d2=11.4631m2d=3.386m

Write the equation for number of years dam becomes unsafe.

d=NR

Here, the number of years dam becomes unsafe is represented as N and rate of the dam to be unsafe is R.

Substitute 3.386m for d and 12mm/year for R to solve for N.

3.386m=N(12mm/year)(103m1mm)3.386m=(12×103m/year)NN=3.386m12×103m/year=282years

The dam becomes unsafe in is service until 282years.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
A steam pipe weighing 45 lb/ft that passes between two buildings 40 ft apart is supported by a system of cables as shown. Assuming that the weight of the cable system is equivalent to a uniformly distributed loading of 5 lb/ft, determine (a) the location of the lowest point C of the cable, (b) the maximum tension in the cable.
A flow of water from a container is controlled by a 6 ft wide L-shaped gate hinged at point a. If the gate is desired to open when the height of the water is 11 ft, determine the weight W of the counterweight to achieve this. Let d = 5ft and H = 13ft.Answer in lb without decimals
A submarine moves horizontally in sea and has its axis 15 m below the surface of water. A pitot-tube properly placed just in front of the submarine and along its axis is connected to the two Limbs of a U tube containing mercury. The difference of mercury level is found to be 170 mm. Find the speed of the submarine knowing that the sp.gr. of mercury is 13.6 and that of sea water is 1.026 with respect of fresh water.

Chapter 5 Solutions

Vector Mechanics for Engineers: Statics

Ch. 5.1 - Locate the centroid of the plane area shown.Ch. 5.1 - Locate the centroid of the plane area shown.Ch. 5.1 - Locate the centroid of the plane area shown.Ch. 5.1 - Locate the centroid of the plane area shown.Ch. 5.1 - Locate the centroid of the plane area shown.Ch. 5.1 - PROBLEM 5.16 Determine the y coordinate of the...Ch. 5.1 - Show that as r1 approaches r2, the location of the...Ch. 5.1 - For the area shown, determine the ratio a/b for...Ch. 5.1 - For the semiannular area of Prob. 5.12, determine...Ch. 5.1 - A built-up beam is constructed by nailing seven...Ch. 5.1 - The horizontal x axis is drawn through the...Ch. 5.1 - The horizontal x-axis is drawn through the...Ch. 5.1 - PROBLEM 5.23 The first moment of the shaded area...Ch. 5.1 - A thin, homogeneous wire is bent to form the...Ch. 5.1 - A thin, homogeneous wire is bent to form the...Ch. 5.1 - A thin, homogeneous wire is bent to form the...Ch. 5.1 - A thin, homogeneous wire is bent to form the...Ch. 5.1 - The homogeneous wire ABC is bent into a...Ch. 5.1 - The frame for a sign is fabricated from thin, flat...Ch. 5.1 - The homogeneous wire ABCD is bent as shown and is...Ch. 5.1 - The homogeneous wire ABCD is bent as shown and is...Ch. 5.1 - Determine the distance h for which the centroid of...Ch. 5.1 - Knowing that the distance h has been selected to...Ch. 5.2 - Determine by direct integration the centroid of...Ch. 5.2 - 5.34 through 5.36 Determine by direct integration...Ch. 5.2 - 5.34 through 5.36 Determine by direct integration...Ch. 5.2 - 5.37 through 5.39 Determine by direct integration...Ch. 5.2 - 5.37 through 5.39 Determine by direct integration...Ch. 5.2 - 5.37 through 5.39 Determine by direct integration...Ch. 5.2 - 5.40 and 5.41 Determine by direct integration the...Ch. 5.2 - 5.40 and 5.41 Determine by direct integration the...Ch. 5.2 - Determine by direct integration the centroid of...Ch. 5.2 - 5.43 and 5.44 Determine by direct integration the...Ch. 5.2 - 5.43 and 5.44 Determine by direct integration the...Ch. 5.2 - 5.45 and 5.46 A homogeneous wire is bent into the...Ch. 5.2 - 5.45 and 5.46 A homogeneous wire is bent into the...Ch. 5.2 - A homogeneous wire is bent into the shape shown....Ch. 5.2 - 5.48 and 5.49 Determine by direct integration the...Ch. 5.2 - 5.48 and 5.49 Determine by direct integration the...Ch. 5.2 - Determine the centroid of the area shown in terms...Ch. 5.2 - Determine the centroid of the area shown when a =...Ch. 5.2 - Determine the volume and the surface area of the...Ch. 5.2 - Determine the volume and the surface area of the...Ch. 5.2 - Determine the volume and the surface area of the...Ch. 5.2 - Determine the volume and the surface area of the...Ch. 5.2 - Determine the volume of the solid generated by...Ch. 5.2 - Verify that the expressions for the volumes of the...Ch. 5.2 - Knowing that two equal caps have been removed from...Ch. 5.2 - Three different drive belt profiles are to be...Ch. 5.2 - Determine the capacity, in liters, of the punch...Ch. 5.2 - Determine the volume and total surface area of the...Ch. 5.2 - Determine the volume and weight of the solid brass...Ch. 5.2 - Determine the total surface area of the solid...Ch. 5.2 - Determine the volume of the brass collar obtained...Ch. 5.2 - The shade for a wall-mounted light is formed from...Ch. 5.3 - 5.66 and 5.67 For the beam and loading shown,...Ch. 5.3 - 5.66 and 5.67 For the beam and loading shown,...Ch. 5.3 - 5.68 through 5.73 Determine the reactions at the...Ch. 5.3 - 5.68 through Determine the reactions at the beam...Ch. 5.3 - 5.68 through 5.73 Determine the reactions at the...Ch. 5.3 - 5.68 through Determine the reactions at the beam...Ch. 5.3 - 5.68 through 5.73 Determine the reactions at the...Ch. 5.3 - 5.68 through 5.73 Determine the reactions at the...Ch. 5.3 - Determine (a) the distance a so that the vertical...Ch. 5.3 - Determine (a) the distance a so that the reaction...Ch. 5.3 - Determine the reactions at the beam supports for...Ch. 5.3 - Determine (a) the distributed load w0 at the end D...Ch. 5.3 - The beam AB supports two concentrated loads and...Ch. 5.3 - For the beam and loading of Prob. 5.78, determine...Ch. 5.3 - The cross section of a concrete dam is as shown....Ch. 5.3 - The cross section of a concrete dam is as shown....Ch. 5.3 - The dam for a lake is designed to withstand the...Ch. 5.3 - The base of a dam for a lake is designed to resist...Ch. 5.3 - Prob. 5.84PCh. 5.3 - Prob. 5.85PCh. 5.3 - The 3 4-m side AB of a tank is hinged at its...Ch. 5.3 - The 3 4-m side of an open tank is hinged at its...Ch. 5.3 - A 0.5 0.8-m gate AB is located at the bottom of a...Ch. 5.3 - A 0.5 0.8-m gate AB is located at the bottom of a...Ch. 5.3 - A 4 2-ft gate is hinged at A and is held in...Ch. 5.3 - Fig. P5.90 5.91 Solve Prob. 5.90 if the gate...Ch. 5.3 - A prismatically shaped gate placed at the end of a...Ch. 5.3 - A prismatically shaped gate placed at the end of a...Ch. 5.3 - A long trough is supported by a continuous hinge...Ch. 5.3 - The square gate AB is held in the position shown...Ch. 5.4 - Consider the composite body shown. Determine (a)...Ch. 5.4 - A cone and a cylinder of the same radius a and...Ch. 5.4 - Determine the location of the center of gravity of...Ch. 5.4 - Prob. 5.99PCh. 5.4 - For the stop bracket shown, locate the x...Ch. 5.4 - Fig. P5.100 and P5.101 5.101 For the stop bracket...Ch. 5.4 - Prob. 5.102PCh. 5.4 - Prob. 5.103PCh. 5.4 - For the machine element shown, locate the y...Ch. 5.4 - For the machine element shown, locate the x...Ch. 5.4 - 5.106 and 5.107 Locate the center of gravity of...Ch. 5.4 - 5.106 and 5.107 Locate the center of gravity of...Ch. 5.4 - A corner reflector for tracking by radar has two...Ch. 5.4 - A wastebasket, designed to fit in the corner of a...Ch. 5.4 - An elbow for the duct of a ventilating system is...Ch. 5.4 - A window awning is fabricated from sheet metal...Ch. 5.4 - Locate the center of gravity of the sheet-metal...Ch. 5.4 - Locate the center of gravity of the sheet-metal...Ch. 5.4 - A thin steel wire with a uniform cross section is...Ch. 5.4 - The frame of a greenhouse is constructed from...Ch. 5.4 - Locate the center of gravity of the figure shown,...Ch. 5.4 - Prob. 5.117PCh. 5.4 - A scratch awl has a plastic handle and a steel...Ch. 5.4 - PROBLEM 5.117 A bronze bushing is mounted inside a...Ch. 5.4 - PROBLEM 5.120 A brass collar, of length 2.5 in.,...Ch. 5.4 - PROBLEM 5.121 The three legs of a small...Ch. 5.4 - Prob. 5.122PCh. 5.4 - Determine by direct integration the values of x...Ch. 5.4 - Prob. 5.124PCh. 5.4 - PROBLEM 5.125 Locate the centroid of the volume...Ch. 5.4 - Prob. 5.126PCh. 5.4 - Prob. 5.127PCh. 5.4 - PROBLEM 5.128 Locate the centroid of the volume...Ch. 5.4 - PROBLEM 5.129 Locate the centroid of the volume...Ch. 5.4 - Show that for a regular pyramid of height h and n...Ch. 5.4 - PROBLEM 5.131 Determine by direct integration the...Ch. 5.4 - PROBLEM 5.132 The sides and the base of a punch...Ch. 5.4 - Locate the centroid of the section shown, which...Ch. 5.4 - Locate the centroid of the section shown, which...Ch. 5.4 - Determine by direct integration the location of...Ch. 5.4 - Alter grading a lot, a builder places four stakes...Ch. 5 - 5.137 and 5.138 Locate the centroid of the plane...Ch. 5 - 5.137 and 5.138 Locate the centroid of the plane...Ch. 5 - Prob. 5.139RPCh. 5 - Determine by direct integration the centroid of...Ch. 5 - Determine by direct integration the centroid of...Ch. 5 - The escutcheon (a decorative plate placed on a...Ch. 5 - Determine the reactions at the supports for the...Ch. 5 - A beam is subjected to a linearly distributed...Ch. 5 - A tank is divided into two sections by a 1 1-m...Ch. 5 - Determine the y coordinate of the centroid of the...Ch. 5 - An 8-in.-diameter cylindrical duct and a 4 8-in....Ch. 5 - Three brass plates are brazed to a steel pipe to...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
International Edition---engineering Mechanics: St...
Mechanical Engineering
ISBN:9781305501607
Author:Andrew Pytel And Jaan Kiusalaas
Publisher:CENGAGE L
EVERYTHING on Axial Loading Normal Stress in 10 MINUTES - Mechanics of Materials; Author: Less Boring Lectures;https://www.youtube.com/watch?v=jQ-fNqZWrNg;License: Standard YouTube License, CC-BY