Weekly Report 4 10-4-2023

Case Study: Paula’s Pain Paula has worked for Brindle Corporation for 3 years.  During this time, she has worked as a machine operator/cell leader in various work cells.  Recently, the plant went to mandatory 12-hour shifts and plans to remain on this schedule for several months. Paula’s present work cell is manufacturing 3-inch diameter exhaust tubes that are made from stainless steel.  These tubes get a hole punched in them, a flange welded on, and burrs ground off.  The pipe then gets placed into a gage to check that it was made correctly.  (The tubes weigh about six pounds.) Paula has been performing the welding operation.  She leans into the machine and loads the part into a fixture then positions the flange.  Both pieces are clamped (using hand clamps) into position and the machine is cycled by depressing two palm buttons. The gaging operation requires placing the finished part into the gage and clamping it (using hand clamps) into place. A pin is depressed to verify the position…

ADAMSON UNIVERSITY College of Engineering Civil Engineering Department Answer Sheet Name: Date: Course: Time: 4m 4m 100 t 200 kat

Directions: Answer the questions after each situation. 1. David Aquino, engineering director, started out the day uptight. His young child had the flu the night before, and he had been up all night to help. Upon arrival at his office, David had to make urgent phone calls to approve a two-week overtime work plan due to a plant fire the night before and to plan for a product committee meeting the next day to counter environmental concerns about a wastewater treatment plant. Then he spent 30 minutes reviewing the qualifications of new candidates and decided on one. He asked for salary information and wanted to examine the offer before it was sent. He asked for further justification for the budget requested by industrial engineering for a minicomputer. Without reading it, he approved the research proposal from material engineering. He rejected an invitation to speak at a regional meeting of the Philippine Society of Mechanical Engineers by giving an untrue reason. David made a note for the…

SUBJECT COURSE: ERGONOMICS REQUIRED: CONCLUSION AND RECOMMENDATION FOR THE FOLLOWING SCENARIO: (should be 2 paragraphs with 7 sentences each) We carried out a lab experiment on the stroop test. According to the results of our analysis using Minitab ANOVA, there was no error made when we were carrying out the task. here are the objectives of the task: Students should be able to: 1. Understand how human brains process information. 2. Demonstrate compatibility and interference issues. 3. Determine how noise or interference affects perception.

Mech. Engg. Dept. 4th year 2022-2023 Solar Energy Spring course MEC364 Dr. Mahmoud U. Jasim Review/Recap Sheet Q1- Answer with true or false and rewrite the false statements completely in correct form, otherwise no mark will be put on the false statements. 1 2 To represent a location on earth surface you need to define its altitude and longitude angles. 3 Solar zenith and solar incidence angles have the same value for horizontal surface. At sunset time the value of solar altitude angle is maximum. 4 The angle which represents the inclination of a given surface is the zenith angle 5 6 7 8 When the absolute value of sun-wall azimuth angle exceeds 90' this means that the sun rays are reaching the receiving plane. The solar irradiance and the solar irradiation have the same physical meaning. In the case of clear sky weather, the beam solar irradiation on a horizontal surface is less than the diffused irradiation. The total solar radiation received by a tilted surface is the same as that…

Help!!! Please answer all Correctly!!! Please

Help!!! Please answer all Correctly!!! Please

1- What is management engineering? Is it an engineering branch, is it a profession, or what? 2- Define your duties as a management engineer? Whyshould Corporation need a management engineer? What is it you offer for the Corporation? 3- Mehmet is a manufacturing engineer at a bicycle company. Part of his job is to inspect broken bikes and draw up design plans for their repairs. One day, Mehmet gets instructions from his supervisor to fix a bike with brake cables off. When Mehmet inspects the bike, he notíces that the cables are broken because they are made of low-quality material, He suspects that this bike is specialy designed and that the customer does not know which materials will be most suitable for brake cables. That's why Mehmet decides to use a more durable material for cables when preparing design plans for the repair of the bike. When Mehmet goes to fix the bike, he learns that the customer specifically wants the bike to be repaired, but that no aesthetic changes should be…

J 6

ACTIVITY 2 (LECTURE) SCI 2 PHYSICS FOR ENGINEERS I. Answer the following and write your answers on a piece of paper. Upload your work in pdf or jpeg file (portrait). Express your final answers in two decimal places. 1. A turtle is crawling along a straight line. Its distance from the origin at any instant is given by the equation x = 8t – 3t², where x is in centimeters and t is in seconds. Find (a) the average velocity of the body in the interval from t = Os to t = 1s (1pt) and (b) the instantaneous velocity at t = 2.5s. (1pt) 2. A cheetah is chasing a deer at velocity v = 1.8 t³ – 12t where in v is in meters and t is in seconds. Find (a) the average acceleration at time interval of 3.5s and 4.5s (2pts) and (b) the instantaneous acceleration at t = 1.5s.(2pts) 3. An antelope moving with constant acceleration covers the distance between two points 50m apart in 5 seconds. Its velocity as it passes the second point is 15 m/s. What is the antelope's acceleration? (2pts) 4. A ball is…

Create a reading outline for the given text "STRESS and STRAIN".

Can you please answer the questions below

TOPIC: ENGINEERING ECONOMICS SPECIFIC INSTRUCTION: Solve each problem NEATLY and SYSTEMATICALLY. Show your COMPLETE solutions and BOX your final answers. Express all your answers in 2 decimal places. PROBLEM: Cardinal Financing lent an engineering company Php 500,000 to retrofit an environmentally unfriendly building. The loan is for 5 years at 10 % per year simple interest. How much money will the firm repay at the end of 5 years?

Question 3 You are working on a design team at a small orthopaedic firm. Your team is starting to work on a lower limb (foot-ankle) prosthesis for individuals who have undergone foot amputation (bone resection at the distal tibia). You remember hearing about "osseointegration" in an exciting orthopaedic engineering class you attended at Clemson, so you plan to attach the foot prosthesis using a solid metal rod inserted into the distal tibia. You think stainless steel or titanium alloy might be a useful rod material. You decide to begin this problem by identifying typical tibial bone anatomy and mechanical behavior (as provided in the tables and image below). You assume the tibial bone can be modeled as a hollow cylinder of cortical bone, as represented in the image. You anticipate the length of the rod will be 1/2 the length of the tibia. Q3G: Critical Thinking: What would you propose to your team as the next step in this analysis? Is it reasonable to assume the rod will experience the…

SUBJECT - MACHINE SHOP & THEORY1. Identify the different hazards shown in the image. 2. List down the different hazards that you identified. 3. Explain the corrective measures to be done in each identified hazards in order to make safe your working environment   There are unsafe workplaces but none can be more unsafe than this one. Your goal is to find at least 22 unsafe acts and conditions in this image.  There are total 25 hazards but you need to identify just 22 to complete the activity.

Please solve the question on the sheet and get a clear picture and submit the picture. thankyou

I need parts 8, 9, and 10 answered. Number 1 is an example of how it should be answered. NOTE: Read the instructions, no where does it say any drawing is required. It is really frustrating when I wait all this time for an answer to a question and some tutor does even read the instructions and just declines it...its ridicilous.

Ok this is the first problem i already answered  Chapter 3. On a Thursday, Jeanie decided that she would like to have a dinner party for a few of her colleagues and was wondering if Saturday was a feasible day to have the party or not. She wanted to get an idea of how many hours of work she would need to do to make a reasonably fancy dinner ready by 6 PM on Saturday. She decided to create a project network based on the activities she thought were essential for doing this. Help her identify the critical path by creating a project network and activity schedule (show work in your submission file in the last question of this problem set) and answer the following questions.       Immediate Time Activity Description   Predecessor Hours A Choosing dishes/recipes -- 2 B Inviting and confirming # of people -- 2 C Making ingredient list A 1 D Making shopping list B, C 1 E Going for shopping D 2 F Making the meal E…

Ps: Answer accordingly with clear explanations. Make sure to answer from the point of view of an engineering student.  Vectors experiment In what manner does the quadrant placement of the supposed forces affect the entirety of the experiment in terms of the resultant force? (we don't do this so I really ur need help)

Please answer complete question

This is an engineering problem and not a writing assignment. Please Do Not Reject. I had other engineering tutors on bartleby help me with problems similar to this one. This problem must be presented in a logical order showing the necessary steps used to arrive at an answer. Each homework problem should have the following items unless otherwise stated in the problem: a. Known: State briefly what is known about the problem. b. Schematic: Draw a schematic of the physical system or control volume. c. Assumptions: List all necessary assumptions used to complete the problem. d. Properties: Identify the source of property values not given to you in the problem. Most sources will be from a table in the textbook (i.e. Table A-4). e. Find: State what must be found. f. Analysis: Start your analysis with any necessary equations. Develop your analysis as completely as possible before inserting values and performing the calculations. Draw a box around your answers and include units and follow an…

as per your policy, customer service from bartley stated since you took a incomplete question and answered it instead of questions that actually need answering.    you owe me my questions and not to only solve one question, kindly solve all 3. And when i end up switching to CHEG not only will i be posting this on my vlog and social media i will also be contacting BBB and i will make sure to find out whos the special kid behind answering and trolling me ((:   kindly answer all 3 , thanks

I need the answer as soon as possible

Task 2 The transfer of heat from one fluid to another is an essential component of all chemical processes. Whether it is to cool down a chemical after it has been formed during an exothermic reaction, or to heat components before starting a reaction to make a final product, the thermal processing operation is core to the chemical process. It is essential that heat transfer systems for chemical processes are designed to maximize efficiency. Because the heat transfer step in many chemical processes is energy intensive, a failure to focus on efficiency can drive up costs unnecessarily. Task expected from student: a) Compare the basic design between the classifications of heat exchanger equipment's (Any three HE equipment's). b) Summarize the merits, demerits, limitations and applications of heat exchanger equipment's with neat sketch.

Subject - Machine Shop & Theory

Answer letter C. Thank you

Help!!! Answer all parts correctly!! Please

Help!!! Answer it correctly!!! Make sure you solve work on hand!!! Answer correctly Please!!!!!!!

Case Study – The New Engineer   Jeff was just hired by GSI, Inc. to be their Environmental and Safety Coordinator.  This is Jeff's first position after completing his engineering degree.  He had taken a course in safety engineering as part of his studies and felt confident that he could handle the job.   Management at GSI, Inc. has assured him that they are committed to maintaining a safe workplace.  They have never had an individual dedicated to this task full-time.  They will implement his recommendations if he can justify them.   As Jeff begins to get familiar with the operations, he spends considerable time on the production floor.  He notices workers clean their tools before break with a liquid from an unmarked 55-gallon drum.  They also use this liquid to clean residue from their skin.  They use paper towels to dry their tools and hands, throw these towels in the trash, and head to the break room for a snack and/or smoke.   In talking with the workers, Jeff learns of some of…

Case Study – The New Engineer   Jeff was just hired by GSI, Inc. to be their Environmental and Safety Coordinator.  This is Jeff's first position after completing his engineering degree.  He had taken a course in safety engineering as part of his studies and felt confident that he could handle the job.   Management at GSI, Inc. has assured him that they are committed to maintaining a safe workplace.  They have never had an individual dedicated to this task full-time.  They will implement his recommendations if he can justify them.   As Jeff begins to get familiar with the operations, he spends considerable time on the production floor.  He notices workers clean their tools before break with a liquid from an unmarked 55-gallon drum.  They also use this liquid to clean residue from their skin.  They use paper towels to dry their tools and hands, throw these towels in the trash, and head to the break room for a snack and/or smoke.   In talking with the workers, Jeff learns of some of…

Help!!! Please answer part b correctly like part A. Please!!!!

A) Determine the maximum allowable pressure, pc,maxpc,max, in the cylindrical pressure vessel.   B) Determine the maximum allowable pressure, ps,maxps,max, in the spherical pressure vessel.   C) Determine the required thickness of the cylindrical pressure vessel, trtr, if it is subjected to the maximum allowable pressure of the spherical pressure vessel that was calculated in Part B.