23 A 50 Hz split-phase induction motor has a resistance of 50 and an inductive reactance of 200 in the main winding as well as starting winding. Determine the value of resistance and capacitance to be added in series with the starting winding to send the same current in each winding with a phase difference of 90°. Ans[ 14.99 Ω, 127.5μF]

23 A 50 Hz split-phase induction motor has a resistance of 50 and an inductive reactance of 200 in the main winding as well as starting winding. Determine the value of resistance and capacitance to be added in series with the starting winding to send the same current in each winding with a phase difference of 90°. Ans[ 14.99 Ω, 127.5μF]

Electric Motor Control

10th Edition

ISBN:9781133702818

Author:Herman

Publisher:Herman

Chapter39: Synchronous Motor Operation

Section: Chapter Questions

Problem 14SQ: Induction motors and welding transformers require magnetizing current, which causes a. lagging power...

See similar textbooks

Similar questions

Induction motors and welding transformers require magnetizing current, which causes a. lagging power factor. b. leading power factor. c. unity power factor. d. zero power factor.
Name three factors that determine the torque produced by an induction motor.
The name plate of single phase induction motor has following data output 373W,230V, frequency 50Hz. Input current 2.9A and power factor is 0.71. Speed 1420 rpm What is efficiency of motor.
A 3-phase, 50-Hz induction motor with its rotor star-connected gives 500 V (r.m.s.) at standstill between the slip-rings on open-circuit. Calculate the current and power factor at standstill when the rotor winding is joined to a star-connected external circuit, each phase of which has a resistance of 10 Q and an inductance of 0.04 H. The resistance per phase of the rotor winding is 0.2 N and its inductance is 0.04 H. 4. Also, calculate the current and power factor when the slip-rings are short-circuited and the motor is running with a slip of 5 per cent. Assume the flux to remain constant. Identify it`s given and solve it
If the no-load speed of a squirrel cage induction motor connected to a three-phase, 50 Hz is 12. 3333 rps, then the number of poles in the motor is
In a 3-phase induction motor, express the mechanical power developed, in terms of air gap power Pg.
A 460V, 25hp, 60Hz, 4 pole, Y-connected induction motor has the following impedances in ohms per phase referred to the stator circuit: R1 = 0.641 Ω R2 = 0.332 Ω X1 = 1.106 Ω X2 = 0.436 Ω Xm = 26.3 Ω The total rotational losses are 1100W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 3.5% at the rated voltage and rated frequency, find the motor’s Speed Stator current Power factor Pconv and Pout Ʈǐnd and Ʈload Efficiency
A 400-V, 3-phase induction motor load takes 900 kVA at a power factor of 0.707. Calculate the KVA rating of the capacitor bank to raise the resultant power factor of the installation of 0.866 lagging. Find also the resultant power factor when the capacitors are in circuit and the motor load has fallen to 300 kVA at 0.5 power factor.
Subject = electric machines A three-phase, 4-pole, star connected induction motor runs at 1350 r.p.m on a 50 Hz, 440V supply. The rotor has a resistance and per phase standstill reactance of 0.4Ω and 4Ω respectively. If the rotor/stator turns ratio is 0.6. Determine (i) Rotor current (ii) maximum torque (iii) Speed corresponding to maximum torque (iv) Total Rotor copper losses.
4 DECIMAL PLACES : 1. A single-phase motor has stator windings in space quadrature and is supplied with a single-phase voltage of 200 V at 50 Hz. The standstill impedance of the main winding is (5.2 + j10.1) and of the auxiliary winding is (19.7 + j14.2). Find the value of capacitance to be inserted inthe auxiliary winding for maximum starting torque.
A 3-phase, 6 pole, 440 V, 60 Hz, Y-connected induction motor has the following impedances per phase referred to the stator circuit: R1=0.43 Ω, R2=0.54 Ω, X1=1.263 Ω, X2=0.608 Ω, XM=43Ω The total rotational losses are 1100 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 2 percent at the rated voltage and rated frequency, Find the motor speed, stator current, output power
a)the figure below shows the per-phase equivalent circuit of a two - pole three- phase induction motor operating at 50 Hz . The voltage (E1) across the magnetizing inductance is 210 v , and the slip (s) is 0.05 . What is the developed torque produced by the motor ? b) A 4 poles , 50Hz , Y-connected three phase induction motor has the per phase equivalent circuit parameters of (R1 =R2=0.12 , X1=X2=0.6 , Xm =12 ) ohm and I2 =20 (0 . Use exact equivalent circuit to determine the following at rated slip of 0.03 : I. Stator current II. Magnetizing current III. Power factor IV. Developed torque C) What is the physical meaning for each of the following induction motor parameters : R1 , R2 , Rc , X1 , X2 , Xm d) What is synchronous watt