5. A rigid bar AB, 9 m long is suspended by two vertical rods at its end A and B and hangs in ahorizontal position by its own weight. The rod at A is brass, length 3m, cross-sectional area is1000 mm? and E̟ =1×10°N/ mm? . The rod at B is steel, length 5 m , cross-sectional area is 445mm?. At what distance 'd' from A may a vertical load P=300ON be applied if the bar is to remainhorizontal even after the load is applied?ve stredSteel5mBrass3mP = 3000NB9m

Answered: Image /qna-images/answer/2a98758a-7287-4fa5-80f5-26863119b55d.jpg

5. A rigid bar AB, 9 m long is suspended by two vertical rods at its end A and B and hangs in a horizontal position by its own weight. The rod at A is brass, length 3m, cross-sectional area is 1000 mm? and E, =1×10°N /mm² . The rod at B is steel, length 5 m , cross-sectional area is 445 mm?. At what distance 'd' from A may a vertical load P=3000N be applied if the bar is to remain horizontal even after the load is applied? Steel 5m Brass 3m P = 3000N A 9m

5. A rigid bar AB, 9 m long is suspended by two vertical rods at its end A and B and hangs in a horizontal position by its own weight. The rod at A is brass, length 3m, cross-sectional area is 1000 mm? and E, =1×10°N /mm² . The rod at B is steel, length 5 m , cross-sectional area is 445 mm?. At what distance 'd' from A may a vertical load P=3000N be applied if the bar is to remain horizontal even after the load is applied? Steel 5m Brass 3m P = 3000N A 9m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A cantilever beam 3 m long carries a uniformly varying load zero at fixed to 1200 N/m at free end. Assume that E = 10 GPa and I = 30 x 10x10⁶ mm⁴. 1. Which of the following most nearly gives the deflection at free end? a. 21.4 mm b. 29.7 mm c. 38.1 mm d. 18.5 mm 2. Which of the following gives the deflection at a section 2 m from fixed end? a. 10.5 mm b. 20.3 mm c. 16.4 mm d. 14.8 mm 3. Which of the following gives the rotation at a section 2 m from fixed end? a. 0.421° b. 0.914° c. 0.739° d. 0.614°
Determine support reaction at B . Given P=100 Kn L=10 m
The bar of negligible weight is supported by two springs, each having a stiffness k = 100 N/m. If the springs are originally unstretched, and the force is vertical as shown, determine the angle θ the bar makes with the horizontal, when the 30-N force is applied to the bar. Give your answer in degrees and to 3 significant digits.
Determine the unstretched length of spring AC if aforce P = 80 lb causes the angle θ = 60° for equilibrium.Cord AB is 2 ft long. Take k = 50 lb/ft.
A downward load of Q = 33 kN is applied to rigid bar ABD as shown in the sketch. Axial member CDE is subjected to a downward load of P = 27 kN at joint E plus a force at joint D from the rigid bar. The axial member has an elastic modulus of E = 69 GPa and a cross-sectional area of A1 = A2 = 145 mm2. Assume that a = 390 mm, b = 220 mm, c = 630 mm, and d = 490 mm. Determine the vertical displacement of joint E. Draw a free body diagram of rigid bar ABD, and determine the magnitude of the vertical reaction force at pin D.Answer:D = kN
determine the vertical reaction at B in kN using any Geometric Method. Consider 250 mm x 400 (b x h) mm section and E = 100,000 MPa. Enter the absolute value only and round-off your answer to 3 decimal places
# = poundsa) what is the shear force at 5' rt. of A? (in pounds, 2 decimal places)b) what is the bending moment at 5' rt. of A? (in pounds, 2 decimal places)
where, bf1= 260 bf2 = 120 tf = 25 tw = 16 d1 = 160 d2 = 110 1. Calculate the location of the neutral axis from the bottom of the beam in mm. 2. Compute for the moment of inertia in 1x10^6 mm^4. 3. What is the value of in kN/m, considering flexural stress in tension? 4. What is the value of in kN/m, considering flexural stress in compression? 5. What is the statical moment of area (Q) in 1x10^3 mm^3 ? Use three decimal places. 6. What is the value of in kN/m, considering shear stress at the welded section? 7. What is the safest value of in kN/m? Use three decimal places.
Determine the force P required to force the 15° wedge under the 72-kg uniform crate which rests against the small stop at A. The coefficient of friction for all surfaces is 0.46.
Calculate for the axial force in kN at member GK of the frame shown in figure 2 using cantilever method. Enter absolute value and use 2 decimal places in your solution. a = 33.8 kN b = 27.2 kN C= 4.8m
The three-bar truss ABC shown in the figure has a span L = 3 m and is constructed of steel pipes having cross-sectional area A = 3900 mm^2 and modulus of elasticity E = 200 GPa. A load P acts horizontally to the right at joint C. 1. If P = 60 kN, what is the horizontal displacement of joint B? a. 1.99 mm b. 7.50 mm c. 5.21 mm d. 2.25 mm 2. What is the maximum permissible load P if the displacement of joint B is limited to 2.5 mm? a. 85.0 kN b. 75.4 kN c. 52.1 kN d. 12.5 kN
6.78 The chain AB weighs 25 N/m. If the force in the chain at B is 4000 N, determine the length of the chain. (Ans: 26.7m)