A dual pulley with an inner diameter of 100 cm and an outer diameter of 300 cm supports a pair of identical, 32.5 kg weights. The left weight hangs by an inextensible cable wrapped around the inner pulley. The right weight is supported by an inextensible cable wrapped around the outer pulley, looped around a smaller, massless pulley, and attached to a hook in the ceiling. If the dual pulley has a mass of 2.5 kg and a radius of gyration of 38 cm, find the speed of the left weight after it has risen 2 m. The left weight rises at 2.44 V o m/s Round answer to 3 significant figures.

A dual pulley with an inner diameter of 100 cm and an outer diameter of 300 cm supports a pair of identical, 32.5 kg weights. The left weight hangs by an inextensible cable wrapped around the inner pulley. The right weight is supported by an inextensible cable wrapped around the outer pulley, looped around a smaller, massless pulley, and attached to a hook in the ceiling. If the dual pulley has a mass of 2.5 kg and a radius of gyration of 38 cm, find the speed of the left weight after it has risen 2 m. The left weight rises at 2.44 V o m/s Round answer to 3 significant figures.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

What is the mechanical advantage of a wheelbarrow if the center of gravity of the wheelbarrow and its load has a perpendicular lever arm of 10.5 cm, while the hands have a perpendicular lever arm of 1.2 m?
what is the effect of 1- gravity (g), 2- (m/l) on the value of the rate or spring constant (K)
A hydraulic press has a ram of 30 cm diameter and a plunger of 2cm diameter. it is used for lifting a weight of 30 kN. How much force is required at the plunger? a) 155.5kN b)466.6kN c) 311.1 kN d) 233.3 kN
A clock is powered by a 1.84 kg mass hanging on a chain passing over and engaging a 4.96-cm diameter pulley of the clock mechanism. Calculate the energy in Joules has been put into the clock mechanism when the weight drops 2.382 m.
The small piston of a hydraulic lift has a cross-sectional area of 3.00cm^2,and its large piston has a cross-sectional area of 200cm^2.What downward force of magnitude F1 must be applied to the small piston for the lift to raise a load whose weight is Fg= 15.0kN?
An Olympic lifter (m = 103kg) is holding a lift with a mass of 350 kg. The bar exerts a purely vertical force that is equally distributed between both hands. Each arm has a mass of 9 kg, are 0.8m long and form a 40° angle with the horizontal. The CoM for each arm is 0.5 m from hand. Assuming the lifter is facing us in the diagram below, his right deltoid inserts 14cm from the shoulder at an angle of 13° counter-clockwise from the humerus. Find the force right deltoid
A rope pulls a 200 kg sleigh up a slope at incline angle θ=30 deg, through distanced=20m. The sleigh and its contents have a total mass of 200kg. The snowy slope is soslippery that we take it to be frictionless. How much work is done by each force(Normal, gravitational, rope’s) acting on the sleigh?
A hydraulic system consists of a piston with a 0.64 cm diameter and a second piston with a diameter of 3.8 cm. Determine the force needed to lift a 500N weight
Include the free body diagram The diameters of a small piston and a large piston of hydraulic jack are 2 cm and 10 cm respectively. A force of 60 N is applied in the small piston. Find the load lifted in N by the large piston when the piston are on the same level.Take density of the liquid in the jack is 1000 kg/m^3. a. 1625 b. 1520.5 c. 1500 d. 1600
Two pistons of a hydraulic lift have diameters of 60 cm and 5 cm. What is the force exerted by the larger piston when 50 N is placed on the smaller piston?
2. The force, in kN, acting on one of the 1.5-m sides of an open cubical water tank (which is full) is:a. 18.2b. 16.5c. 15.3d. 12.1
For masses and are 200 kg, 300 kg, 240 kg, and 260kg respectively. The corresponding radii of rotation are 0.2m, 0.15m, 0.25m and 0.3 m respectively and the angles between successive masses are 45 , 75 and 135 . Find the position and magnitude of the balance mass required, if it’s radius of rotation is 1.4 m.