A hollow brass alloy shaft with an outside radius of 50-mm and a wall thickness of 10-mm is subjected to a torque of T = 5.5 kN-m. Determine the minimum required diameter in mm of a solid steel shaft for which the maximum shear stress is the same?

A hollow brass alloy shaft with an outside radius of 50-mm and a wall thickness of 10-mm is subjected to a torque of T = 5.5 kN-m. Determine the minimum required diameter in mm of a solid steel shaft for which the maximum shear stress is the same?

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.3.12P: A propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable...

See similar textbooks

Related questions

Q: - A shaft composed of segments AC, CD, and DB is fastened to rigid supports and loaded as shown in…

Q: 318. A solid compound shaft is made of three different materials and is subjected to two applied…

Q: A steel shaft is to be manufactured either as a solid circular or as circular tube. The shaft is…

Q: Determine the torsional shear stress in a solid circular shaft having a diameter of 1.25 in. that is…

Q: 1) A stepped steel shaft consists of a hollow shaft 2.5 m long with an outside diameter of 110 mm…

Q: A hollow steel tube has an outside diameter of 224 mm and inside of 201 mm. Which of the following…

Q: composite shaft is made by slipping a bronze tube of 3-in. outer diameter an -in. inner diameter…

Q: (a.) Determine the maximum length of the flexible shaft consists of a 5mm -diameter steel wire…

Q: The compound shaft made from the same material consisting of two segments AC and CB is firmly…

Q: Part of a steel tube, 30mm external diameter and 6mm thick, is to be enlarged to form a compound…

Q: PROBLEM 2 A drive shaft running at 2500 rpm has outer diameter of 80mm and inner diameter of 60mm.…

Q: A steel shaft is to be manufactured either as a solid circular or as circular tube. The shaft is…

A: Given Data, :-∗Torque,T=1200N⋅m∗Allowable shear stress, ζall=40MPa∗θallowable=∅L=0.75°/m* Shear…

Q: The stepped steel shaft carries the torque T. Determine the allowable magnitude of T if the working…

A: Answer: The magnitude of allowable torque is 933.0530 N•m.

Q: A stepped shaft ACB having a solid circular cross sections with two different diameters and two…

Q: 2. The composite shaft of total length 1.8 m consists of 5 mm thick brass and is fixed to a 30 mm…

Q: A rod is made from two segments: AB is steel and BC is brass. It is fixed at its ends and subjected…

A: Given Data Ds=30 mm T=710 N.m

Q: PROBLEM 3. A 5-m steel shaft rotating at 1.20 Hz has 72 kW applied at a gear that is 2 m from the…

A: When an object rotate about the point due to the linear force act on the object is known as the…

Q: A hollow aluminum shaft with an outside diameter of 80 mm and a wall thickness of 5 mm has an…

Q: A flanged bolt coupling consists of six - ½ inch steel bolts evenly spaced around a bolt circle of…

A: Given data: nst=6nal=4dst=12indal=34inRst=6 inRal=4 inT=200 in.lb Need to determine the stresses in…

Q: Figure 2 shows a solid shaft consisting of two prismatic circular parts in equilibrium under the…

Q: Task 3: A hollow aluminum alloy 6061-T6 shaft of outer radius c = 40 mm, inner radius b = 30 mm, and…

A: Given data:

Q: 6. A propeller shaft in a ship is 350 mm in diameter. The allowable working stress in shear is 50…

Q: The steel hollow shaft is rigidly attached to a solid bronze shaft by a bolt coupling. A maximum…

Q: Determine the diameter of a solid shaft which will transmit 440 kW at 280 rpm. The angle of twist…

A: Shaft is designed on the basis of following two criteria:- Strength Criteria Induced torsional…

Q: Situation 24: The shaft is made of A992 steel (G = 75 GPa) and has an allowable shear stress of taow…

A: Given data: The shear modulus of steel shaft is G = 75 GPa. The allowable shear stress is τallowabe…

Q: hollow steel shaft, 6 ft long, has an outer diameter of 3 in. and an inner dieter of 1.5 in. The…

Q: Problem 4 A 200-mm-diameter pulley is prevented from rotating relative to 60-mm-diameter shaft by a…

Q: A hollow steel shaft with an outside diameter of 90 mm and a wall thickness of 10 mm is subjected to…

Q: QUESTION 2: 2.1 A shaft is to transmit 190 kW at 180 rev/min. If the maximum torque transmitted is…

Q: Q.4) A composite shaft is subjected to two torques as shown below. Shaft ABC is a hollow…

Q: For the solid circular rods exposed to the shown torques, determine the segment that experiences…

Q: A hollow cylindrical shaft has outer diameter of 115 mm and inside diameter of 75 mm. Determine the…

Q: A figure below is a 200-mm diameter pulley which was attached on a 60-mm diameter shaft and it…

A: Given data Diameter of shaft = d = 60 mmApplied Torque = T= 2200 Nm Allowable shearing stress = 70…

Q: EXAMPLE 5.4 A solid steel shaft AB, shown in Fig. 5-11, is to be used to transmit 5 hp from the…

A: The shafts are used to transmit power from the motor to the application. This power is directly…

Q: A solid circular shaft needs to be designed to transmit a torque of 50Nm. If the allowable shear…

A: GIven DataT = 140 mPaFOS = 2T = 50 N.mTo find diameter

Q: Two 20 mm steel shafts with a 100 MPa yield stress in shear are connected by a brass coupling with…

A: Given, d1 = 20 mmτsteel = 100 MPaτbrass = 60 MPaFOS = 2.1∴ τallow-steel = 1002.1 = 47.62 MPa&…

Q: A composite shaft is made of slipping a bronze tube of 3-in. outer diameter and 2-in. inner diameter…

Q: Determine the maximum torque that can be applied to a hollow circular steel shaft of 100mm outer…

Q: A solid circular steel shaft having an outside diameter of 2.25 in. is subjected to a pure torque of…

Q: steel shaft is to be manufactured either as a solid circular or as circular tube. The shaft is…

A: → Given Data : T = 1200 N.m z = 40 mPa Q = 0.75 / m G = 78 GPaa) For Solid…

Q: solid steel shaft has a diameter of d and a length of L had used to transmit a power of 120 kW at…

Q: PROBLEM 3.2 Determine the maximum shear stress caused by a torque of magnitude T= 800 Nm. [Ans. 87.3…

Q: Figure 1 is presented the solid shaft AB rotates at 650 rpm and transmits 30 kW from the motor…

A: To find: The smallest permissible diameter of the shaft. Given: The speed of shaft AB is NAB=650…

Q: A steel shaft (G = 80 GPa) with an external drive of 30mm must transmit a torque of 2700 N-m. The…

Q: A compound steel (G = 70 GPa) shaft consists of a solid 59-mm-diameter segment (1) and a solid…

Q: For a given maximum average shear stress, determine the factor by which the torque-carrying capacity…

A: The mean area without reversed position Am=(1.10)1.75-π(0.55)22=1.4498 in2 The mean area at reversed…

Q: Part A) A solid circular rod is used to transmit power from a motor to a machine. The diameter of…

Q: A solid circular steel shaft having an outside diameter of 1.50 in. is subjected to a pure torque of…

A: Answer: The correct answer is option (b) i.e. 12.57 ksi.

Q: II. A stepped shaft ACB having a solid circular cross sections with two different diameters and two…

A: Given LA= 225 mm ; diameter of circular cross section A (dA)= 20 mm ;And LB= 450 mm ; diameter of…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

A motor driving a solid circular steel shaft with diameter d = 1.5 in, transmits 50 hp to a gear at B, The allowable shear stress in the steel is 6000 psi. Calculate the required speed of rotation (number of revolutions per minute) so that the shear stress in the shaft does not exceed the allowable limit.
The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?
What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
A stepped shaft ABC consisting of two solid, circular segments is subjected to torques T}and T2acting in opposite directions, as shown in the figure. The larger segment of the shaft has a diameter of dv- 2.25 in. and a length Lt= 30 in.; the smaller segment has a diameter d2— 1.75 in. and a length L, = 20 in. The torques are T, = 21,000 lb-in. and fz=10.000 lb-in. (a) Find reaction torque TAat support A. (b) Find the internal torque T(x) at two locations: x = L1/2 and x = L1+ L2/2. Show these internal torques on properly drawn free-body diagrams (FBDs).
A hollow steel shaft with an outside diameter of 80 mm and a wall thickness of 11 mm is subjected to a pure torque of T = 5,200 N-m.(a) Determine the maximum shear stress in the hollow shaft.(b) Determine the minimum diameter of a solid steel shaft for which the maximum shear stress is the same as in part (a) for the same torque T.
A solid shaft having a diameter of 100mm has an allowable shearing stress of 80 MPa. Determine the maximum torque in KN-m that the shaft can carry without exceeding the allowable shearing stress.
Calculate the maximum and minimum shear stress in a hollow circular shaft of outer diameter 20 mm and thickness 2 mm, subjected to a torque of 92.7 N-m.
Determine the maximum torque that can be applied to a hollow circular steel shaft of 100mm outer diameter and 80mm inner diameter. The shear stress is limited to 70 MPa, and the angle of twist must not exceed 0.4 degrees in a length of one meter. Use G = 83 GPa for steel.
A composite shaft is made by slipping a bronze tube of 3-in. outer diameteran -in. inner diameter over a solid steel shaft of the same length and 2-in.-diameter. The two components are then fastened rigidly together at their ends. What is the largest torque that can be carried by the composite shaft if the working shear stresses are 8 ksi for bronze and 12 ksi for the steel? For bronze, G = 6 x 106 psi, and for steel, G = 12 x 106 psi
2: If the permissible shear stress of a solid shaft is of 70MPa, the torque angle between two cross sections separated 2.5m does not exceed 3°, the applied torque is of 1400N.m and G=11Gpa a. Determine the required diameter in function of the shear stress b. Determine the required diameter in function of the angle of twist
A compound shaft consists of brass segment (1) and aluminum segment (2). Segment (1) is a solid brass shaft with an outside diameter of 0.51 in. and an allowable shear stress of 4500 psi. Segment (2) is a solid aluminum shaft with an outside diameter of 0.41 in. and an allowable shear stress of 6000 psi. Determine the magnitude of the largest torque TC that may be applied at C. Express your answer in lb-in rounded to the nearest tenths.
A steel shaft is to be manufactured either as a solid circular or as circular tube. The shaft is required to transmit a torque of 1200 Nm without exceeding an allowable shear stress of 40 MPa, nor an allowable rate of twist of 0.75º/m. For G = 78GPa, determine: The required diameter doof the solid shaft.g The required outer diameter d2of the hollow shaft if the thickness t of the shaft is specified as one-tenth of the outer diameter. 3.The ratio of diameters (that is, the ratio d2/do and the ratio of the weights of the hollow and solid shafts.