A hollow steel propeller shaft is to transmit 4.5 MW at 3 Hz without exceeding a shearing stress of 50 MPa or twisting through more than 1deg in a length of 26 diameters. Compute the proper diameter if Do =2Di. Show your complete solution.

A hollow steel propeller shaft is to transmit 4.5 MW at 3 Hz without exceeding a shearing stress of 50 MPa or twisting through more than 1deg in a length of 26 diameters. Compute the proper diameter if Do =2Di. Show your complete solution.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.11.7P: A thin-walled steel tube having an elliptical cross section with constant thickness t (see figure)...

See similar textbooks

Related questions

Q: A hollow aluminum propeller shaft, 30 ft. long with 15 in. outer diameter and an inner diameter…

Q: A simply supported shaft between bearings camies a steady load of 10 kN at the centre. The length of…

Q: A hollow shaft has an inner diameter of 0.035m and outer diameter of 0.06m. Compute for the torque…

A: Answer: The torque transmitted by the hollow shaft is 4500 N•m.

Q: A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the…

A: Given: Power transmitted by the shaft P=75kWSpeed of the shaft N=200rpmModulus of rigidity…

Q: The figure shows an inboard engine, 8-ft long steel drive shaft, and propeller for a motor boat. The…

A: Given data: P=200 hpN=3500 rpmG=12×106 psiτ=12000 psi Need to determine the diameter of the smallest…

Q: A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the…

Q: Problem 3. A solid circular shaft of steel is transmitting 20 kW of power at 120 rpm. Determine the…

Q: A hollow shaft transmits 9 MW at 300 rev/min. It is supposed that the maximum allowable stress is…

A: Given: The power transmitted by the shaft is P=9 MW. The maximum allowable shear stress is ζ=70…

Q: A solid shaft of 150 mm diameter is used to transmit torque. Find the maximum torque transmitted by…

A: Given, Diameter of shaft = d = 150 mm Maximum shear stress = τ = 45 N/mm2 Polar moment of…

Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…

Q: A propeller shaft is required to transmit 45 kW power at 500 r.p.m. It is a hollow shaft, having…

A: Given data: - The power transmitted by the shaft is P = 45 kW. The speed of the shaft is N = 500…

Q: 305 A solid steel shaft 5 m long is stressed to 60 MPa when twisted through 4°. Using G = 83 GPa,…

A: Given:-L=5mG= 83 GPaθ=4°τmax=60 MPaf=20 r/sTo find:-Diameter, dPower, P

Q: 5.1 A steel shaft is to transmit 4.5 MW at 3 Hz without exceeding a shearing stress o: MPa, or…

Q: A solid shaft in a rolling mill transmits 30 hp at 100 rpm. Find the diameter in mm of the shaft so…

Q: What is the maximum power P (kW) that can be transmitted by a shaft hollow (do = 50 mm, di = 40 mm)…

A: Outer diameter of shaft= 50mm Inner diameter of shaft= 40mm Rotational Speed of shaft= 600 rpm…

Q: (a) The tubular rotor shaft of a wind turbine shown in Figure 3(a) is of 50 mm and 40 mm outer and…

A: Given data Outer Diameter of Tubular shaft = Do = 50 mm = 0.05 mInner Diameter of Tubular Shaft = Di…

Q: A hollow steel shaft, 12 m long, is required to transmit 1000 kW when running at a speed of 300…

A: Given that , L=12m =12000mm P=1000 kW =1000×106N-mm/s

Q: A hollow circular shaft transmits 25 horsepower while operating at a rate of 180 rev/min. If the…

Q: A hollow shaft has to transmit 6MW at 150rev / min. The maximum allowable stress is not to exceed 60…

Q: A steel propeller shaft is to transmit 4.5 MW at 3 Hz without exceeding a shearing stress of 50 MPa…

A: As per the given data actual answer is different from the given options. Please find the attached…

Q: When subject to an applied torque,a circular shaft of length 600mm twists through an angle of 2°,if…

Q: 8.2 (A). Calculate the dimensions of a hollow steel shaft which is required to transmit 750 kW at a…

Q: Obtain a preliminary design of the shaft by performing the following tasks. Note that forces T1=2880…

Q: A solid steel shaft 5 m long is stressed at 80 MPa when twisted through 4°. Using G = 83 GPa,…

Q: A shaft supported on bearings 200mm apart transmits 187 kW at 200rpm. The maximum bending moment is…

Q: 5.2 A hollow bronze shaft of 75 mm outside diameter and 12.5 mm thick is coaXlal WiU. solid steel…

A: Outer diameter, Do=75 mmInner diameter, Di=50 mmDiameter of steel shaft, D=50 mmT=5693 N.m Note:…

Q: A hollow shaft has an inner diameter of 0.035 m and an outer diameter of 0.06 m. Compute for the…

Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…

Q: A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 104 N/mm2 and length…

A: Write the expression to determine the powerP transmitted by a shaft. P=2πNT60 Here, speed of the…

Q: A hollow shaft has to be designed for a marine engine delivering 1300 kW when running at 150 r/min.…

Q: A steel propeller shaft is to transmit 4.5 MW at 3 Hz without exceeding a shearing stress of 60 MPa…

Q: A solid shaft has 100 mm diameter. It is used to transmits 120 watt power at 200 rpm (Take G = 8 x…

A: Given:Power transmited P=120π Wmodulus of rigidity G=8×104 N/mm2Diameter of shaft d=100 mm or 0.1…

Q: A hollow shaft has to transmit 5MW at 150rev / min The maximum allowable stress is not to exceed 70…

Q: A SOLID circular shaft transmits 50 horsepower while operating at a rate of 150 rev/min. If the…

Q: A solid circular shaft to transmit,80kw power at 200rpm.calculate the shaft diameter and strain…

Q: Consider a simply supported steel shaft as depicted below with 4 cm in diameter and 1 m span between…

A: The critical speed of the shaft with multiple loading can be found out by using methods like…

Q: T 100 mm 70 mm 70 mm 1.5 m 2 m T

Q: Example 7.5: (Numerical problem of a circular shaft) A circular shaft 10 cm diameter and 1.1 m…

Q: A solid circular shaft has a diameter of d mm and is made from steel, which fail when tested in…

A: Given:Syt=150 MPaM=22.2 KN.mT=44.4 KN.m

Q: A hollow nickel steel shaft with outside diameter is twice the inside diameter is to transmit 1492…

Q: The shaft of a heavy-duty tractor transmits 120 kW at 600 rpm, and at the same time supports a load…

Q: A steel shaft is to transmit 4.5 MW at 3 Hz without exceeding a shearing stress of 50 MPa or…

A: Find the diameter of shaft.

Q: hollow steel shafts transmits 200kW of power at

A: Given Data : Speed(N)=150 rpm Power(P)=200 KW Length(L)=5 m Angle of twist(A) =30 Permissible…

Q: A solid steel shaft 6 m long is stressed at 80 MPa when twisted through 8°. Using G= 83 GPa, compute…

A: Given data: Length of the shaft, L = 6 m. Maximum shear stress, τmax = 80 MPa. Twisting angle, Ɵ =…

Q: Q6: The engine of a ship develops 440 kW and transmits the power by a horizontal propeller shaft…

A: The engine of a ship develops 440 kW and transmits the power by a horizontal propeller shaft which…

Question

Show your complete solution.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

A motor driving a solid circular steel shaft with diameter d = 1.5 in, transmits 50 hp to a gear at B, The allowable shear stress in the steel is 6000 psi. Calculate the required speed of rotation (number of revolutions per minute) so that the shear stress in the shaft does not exceed the allowable limit.
What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?
A full quarter-circular fillet is used at the shoulder of a stepped shaft having diameter D2= 1.0 in. (see figure), A torque T = 500 lb-in. acts on the shaft. Determine the shear stress at the stress concentration for values as follows: D1= 0.7,0.8, and 0.9 in. Plot a graph showing versus D?
A stepped shaft ACB having solid circular cross sections with two different diameters is held against rotation at the ends (sec figure). If the allowable shear stress in the shaft is 6000 psi, what is the maximum torque (T0) that may be applied at section C? Find (T0)max if the maximum angle of twist is limited to 0.55º. Let G = 10,600 ksi.
A thin tubular shaft with a circular cross section (see figure) and with inside diameter 100 mm is subjected to a torque of 5000 N · m. If the allowable shear stress is 42 MPa, determine the required wall thickness t by using (a) the approximate theory for a thin-walled tube and (b) the exact torsion theory for a circular bar.
A thin-walled steel tube having an elliptical cross section with constant thickness t (see figure) is subjected to a torque T = 18 kip-in. Determine the shear stress and the rate of twist in degrees per inch) if G = 12 × 106 psi, t = 0.2 in., a = 3 in., and b = 2 in. Note: See Appendix E, Case 16, for the properties of an ellipse.
A propeller shaft of solid circular cross section and diameter d is spliced by a collar of the same material (see figure). The collar is securely bonded to both parts of the shaft. What should be the minimum outer diameter dyof the collar in order that the splice can transmit the same power as the solid shaft?
A long, thin-walled tapered tube AB with a circular cross section (see figure) is subjected to a torque T. The tube has length L and constant wall thickness t. The diameter to the median lines of the cross sections at the ends A and B are dAand dB, respectively. Derive the following formula for the angle of twist of the tube: Hint: If the angle of taper is small, you may obtain approximate results by applying the formulas for a thin-walled prismatic tube to a differential element of the tapered tube and then integrating along the axis of the tube.
A torque T is applied to a thin-walled tube having a cross section in the shape of a regular hexagon with constant wall thickness t and side length b (see figure). Obtain formulas for the shear stress rand the rate of twist
A thin-walled aluminum tube of rectangular cross section (sec fig me) has a centerline dimensions b = 6.0 in. and b = 4.0 in. The wall thickness t is constant and equal to 0.25 in. Determine the shear stress in the tube due to a torque T = 15 kip-in. Determine the angle of twist (in degrees) if the length L of the tube is 50 in. and the shear modulus G is 4.0 x 106 psi.
A square tube section has side dimension of 20 in. arid thickness of 0.5 in. If the section is used for a 10-ft-long beam subjected to 1250 kip-in, torque at both ends, calculate the maximum shear stress and the angle of twist between the ends. Use G = 11,600 ksi.