A large oil tank contains a circular gate with a diameter of 2 meters fixed to the inclined wall of the tank, as shown in Figure 2. The gate is installed on a column along its horizontal diameter, oil height 12 m above the column. Find the force needed to open the gate, if you know that the density of oil is 850. (Ixe= TR*/4)

A large oil tank contains a circular gate with a diameter of 2 meters fixed to the inclined wall of the tank, as shown in Figure 2. The gate is installed on a column along its horizontal diameter, oil height 12 m above the column. Find the force needed to open the gate, if you know that the density of oil is 850. (Ixe= TR*/4)

Name: A large oil tank contains a circular gate with a diameter of 2 meters
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A large oil tank contains a circular gate with a diameter of 2 meters fixed to theinclined wall of the tank, as shown in Figure 2. The gate is installed on a columnalong its horizontal diameter, oil height 12 m above the column. Find the forceneeded

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

The submerged sector gate AB shown in the figure is 1/9 of a circle of radius 4 m. The length of the gate is 10 m. Determine the horizontal component of water pressure acting on the gate.
A circular tank with a diameter of 4.5m is filled with two immiscible fluids. Water to a depth of 3m andoil with a relative density of 0,9 to a depth of 2mDetermine the Hydrostatic force acting on the verticalside of the tank and the position of the centre of pressure from the oil-free surface.
A tube with diameter of 0.3cm is inserted into water (Surface tension= 0.061N/m). The water in the tube rises to a height of 0.45cm from the surface. Calculate the contact angle between the water and the tube.
A cylindrical tank of 1.5 m diameter and height 0,75 m has a hemispherical dome. The tank contains oil of relative density 0.84. The dame is joined to cylinder position by four equally spaced bolts. If pressure gauge at point M, 0.3 m above base of tank read 50 kPa. Determine force each bolt.
Step by Step Determine the distance that the column of fluid will rise in a 1-cm open tube when the tube is inserted in fluid with a density of 990 kg/m^3 and a surface tension of 0.09 N/m. PLEASE Provide answer in cm and assume a contact angle of 0-degree.
Two capillary tubes with 4mm and 2mm inside diameters were inserted into a liquid of density 1.12gcm^-3. Calculate the surface tension of the liquid if the difference between the capillary rises in the tubes is 2cm. Assume contact angle Is zero.
Bernoulli's equation Calculate the pressure at point 2 of the pipe shown in the figurenext, knowing that the oil has a density of 0.91 g/cm3. Answer : 5.32 MPa
What is the pressure at the bottom of 0.5m height fluid if the container moves 5m/s2 upward? Fluid has a density of 2000kg/m3 a. 13665Pab. 13258Pac. 14810Pad. 16145Pa
plzz help meeeeeeeeee The belt moves at a steady velocity V and skims the top of oil tank. Assuming a linear velocity profile in the oil, what is the required belt-drive power P (watt) (P= power = force x Velocity) if the belt moves at 3.5 m/s over oil with specific gravity of S=3.6 and oil viscosity of 0.004 m2/s. Belt geometry L= 2 m, b = 60 cm, and oil depth is h = 3 cm?
A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck decelrates at 4 m/s^2. ( WITH FREE BODY DIAGRAM)
A bottle consist of a cylinder 35 cm in diameter and 30 cm high and a neck 5 cm in diameter and 30 cm long. The bottle is inserted into a body of water, with the open end of the neck first until the neck is completely filled with water. Assuming the pressure of the atmosphere is standard, and neglecting vapor pressure, what is the depth to which the open end is submerged below the free surface? Show correct figure.
Find the capillary raise of the water in the tube of diameter 6mm, which is immersed vertically in the container. The surface tension of water is 0.07115 N/m. Take the angle of contact is = 00 The capillary raise of water in the tube is (unit in mm)= ______