A piezometer and a Pitot tube are tapped into a 6-cm-diameter horizontal water pipe, and the height of the water columns are measured to be 22 cm in the piezometer and 31 cm in the Pitot tube (both measured from the top surface of the pipe). [Satu piezometer dan satu tiub Pitot dipasang pada paip air mendatar dengan diameter 6-cm, dan ketinggian tiang air yang diukur adalah 22 cm pada piezometer dan 31 cm pada tiub Pitot (kedua-duanya diukur dari permukaan atas paip).] Determine the velocity at the centre of the pipe. Use gravitational force equals to 9.81 m/s. [Tentukan halaju pada pusat paip. Gunakan daya graviti bersamaan 9.81 m/s']

A piezometer and a Pitot tube are tapped into a 6-cm-diameter horizontal water pipe, and the height of the water columns are measured to be 22 cm in the piezometer and 31 cm in the Pitot tube (both measured from the top surface of the pipe). [Satu piezometer dan satu tiub Pitot dipasang pada paip air mendatar dengan diameter 6-cm, dan ketinggian tiang air yang diukur adalah 22 cm pada piezometer dan 31 cm pada tiub Pitot (kedua-duanya diukur dari permukaan atas paip).] Determine the velocity at the centre of the pipe. Use gravitational force equals to 9.81 m/s. [Tentukan halaju pada pusat paip. Gunakan daya graviti bersamaan 9.81 m/s']

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Two identical upright cylindrical tanks contains H2O,the first tank is full and the second is 2/3-full. If theradii of the orifices are the same, compare the time todrain of each tank. answer: √1.5
kindly help me with this problems INSTRUCTIONS: Solve the problems neatly and systematically. SUse free-floating decimals in all your calculations and in expressing your answers. Box your final answers. 2. Water in a partially filled large tank is to be supplied to the rooftop, which is 8 m above the water level inthe tank, through a 2.5 cm internal diameter pipe by maintaining a constant air pressure of 300 kPa (gauge) inthe tank. If the head loss in the piping system is 2 m of water, determine the discharge rate of the supply ofwater to the rooftop in L/s
In the benzene plant, the pressure drop at some point of a pipeline in which benzene is passing through is measured with a U-tube manometer (Rm,1) as 10 cm (1stsituation). The manometer fluid is carbon tetrachloride(CCl4). Then, in order to avoid CCl4 poisoning, it is decided to add a layer of water to both arms of manometer (2nd situation). So, 4 cm of water is added to the left arm and 8 cm of water is added to right arm. In this newsituation, what will be the height difference of manometer fluid (CCl4) between the arms of the manometer (Rm,2)?Data: ρbenzene=876 kg/m3, ρwater=997 kg/m3, ρCCl4=1587 kg/m3
Sulfuric acid with a density of 1980 kg / m3 and a viscosity of 26.7 cP flows in a pipe with a diameter of 35 mm. If the acid flow rate is 1 m3 / min, what is the pressure loss due to friction in a 30 m long smooth pipe? a. Reynold number = Answer. b. Loss of Pressure = AnswerkPa.
A pump discharges 8000 liters per minute of a certain brine solution (SG=1.20) to an evaporating pond. The intake line is 25cm in diameter and is at the same level as the pump discharge line, which is 15cm in diameter. The pressure at the inlet of the pump is -170mm of mercury. The pressure gage connected to the pipe discharge reads 150 kPa, and its center is 2.0mabove the center of the discharge flange. The vapor pressure of the brine solution is 40mm of Hg. If the pump efficiency is 80%. How much power is required?
a scaled tank cintaining sea water to a height of 12m also contain air above the water at gage pressure of 5 atm, water flow out from the bottom through a small hole. calculaye the efflux speed of the water, psw = 1.03x10 kg/m
Cooling water having a density and viscosity of 998 kg/m3 and 0.95 cP isflowing thru a 25-mm med. wt. steel pipe (I.D. = 0.0272 m). The pipeline isequipped with an orifice meter of 10 mm I.D and a U-tube mercurymanometer. If the manometer shows 30 cm reading, calculate thevolumetric flow rate of water in liters per minute.
U - tube is used to pressure the difference in water channel. p1= 1000 kg/m3. The orange fluid in the U - tube has a density: p2= 2000 kg/m3. The height a = 10 cm and h = 15 cm. If the pressure at point ① is 111 kPa, what is the pressure at point ② ?
A Horizontal Capillary Tube (Radius 10 Um) Con- Tains An Oil/Water Interface. The Pressure In The Oil Phase Is 14.5 Psi (100 KPa). Determine The Pressure In The Water Phase If The Contact Angle Is 30° And The IFT Is 30 Dynes/Cm (30 MN/M).
A Pitot tube in a pipe in which air is flowing is connected to a manometer containing water asshown below. If the difference in water levels in the manometer is 10 cm, what is the velocity of flow in the pipe? Assume a tube coefficient of Cp = 0.99, specific weight of air is 12 N/ sq.m.
What are Reynolds numbers and what do they indicate about the physical and spatial charactericstics of aquatic systems? a) In hydrological terms what are recharge and residence time? b) What happens if pumping rate from aquifers exceeds recharge rate?
Determine the head loss due to friction of an oil of specific gravity 0.77 and viscosity 0.85 poise is flowing through a pipe at the rate of 3.7 m/s. Assume the pipe diameter as 29 cm and the length of the pipe as 5618 cm. Oil Density (in kg/m3) Reynold's Number - Co-efficient of friction - Head loss due to friction