(A) The front window of an truck is defogged by passing warm air over its inner surface. If thewarm air is at T,i= 50°C and the corresponding convection coefficient is h= 35 W/m².K, what arethe inner and outer surface temperatures of 7 mm-thick window glass, if the outside ambient airtemperature is T,0=10°C and the associated convection coefficient is h, = 65 W/m?.K? (Assume kfor glass =1.4 W/m-K)

Answered: Image /qna-images/answer/9d23cd7b-9fb3-4516-b88e-b6a5f018970a.jpg

(A) The front window of an truck is defogged by passing warm air over its inner surface. If the warm air is at T,i= 50°C and the corresponding convection coefficient is h= 35 W/m?.K, what are the inner and outer surface temperatures of 7 mm-thick window glass, if the outside ambient air temperature is T,=10°C and the associated convection coefficient is h, = 65 W/m?.K? (Assume k for glass =1.4 W/m-K)

(A) The front window of an truck is defogged by passing warm air over its inner surface. If the warm air is at T,i= 50°C and the corresponding convection coefficient is h= 35 W/m?.K, what are the inner and outer surface temperatures of 7 mm-thick window glass, if the outside ambient air temperature is T,=10°C and the associated convection coefficient is h, = 65 W/m?.K? (Assume k for glass =1.4 W/m-K)

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter8: Natural Convection

Section: Chapter Questions

Problem 8.10P

See similar textbooks

Similar questions

A spherical tank, 1 m in diameter, is maintained at a temperature of 120°C and exposed to a convection environment. With A = 35 W/m2 C and Too = 15°C, what thickness of wethane foam should be added to ensure that the outer temperature of the insulation does not exceed 40°C? What percentage reduction in beat loss results from installing this insulation?
The rear window of an automobile is defogged by passing warm air over its inner surface. If the warm air is at T∞,i=40°C and the corresponding convection coefficient is hi=30 W/m2·K, what are the inner and outer surface temperatures, in °C, of 4-mm-thick window glass, if the outside ambient air temperature is T∞,o= -27.5°C and the associated convection coefficient is ho=65 W/m2·K? Evaluate the properties of the glass at 300 K. a. what is Ts, i in °C? b. what is Ts, o in °C?
The rear window of an automobile is defogged by passing warm air over its inner surface. If the warm air is at T∞,i=40°C and the corresponding convection coefficient is hi=30 W/m2·K, what are the inner and outer surface temperatures, in °C, of 4-mm-thick window glass, if the outside ambient air temperature is T∞,o= -27.5°C and the associated convection coefficient is ho=65 W/m2·K? Evaluate the properties of the glass at 300 K. a. what is the heat flux through the original walls in W/ m^2? b. what is the heat flux through the retrofitted walls in w /m^2?
In a solar collector 1 m wide by 4 m long, the glass cover plate at an average temperature of 29°C is spaced 40 mm from the absorber plate at an average temperature of 75°C. Estimate the convection heat loss coefficient from the absorber plate to the glass when the collector is positioned horizontally. What is the convection heat loss coefficient if the spacing reduced to 10 mm?
Chips of width L _ 15 mm on a side are mounted to a substrate that is installed in an enclosurewhose walls and air are maintained at a temperature of Tsur=T∞=25oC. The chips have an emissivity ofε=0.60 and a maximum allowable temperature of Ts=85oC.(a) If heat is rejected from the chips by radiation and natural convection, what is the maximum operatingpower of each chip? The convection coefficient may be approximated as h=11.7 W/m2K.(b) If a fan is used to maintain airflow through the enclosure and heat transfer is by only forcedconvection, with h=250 W/m2K, what is the maximum operating power?
Chips of width L _ 15 mm on a side are mounted to a substrate that is installed in an enclosure whose walls and air are maintained at a temperature of Tsur=T∞=25oC. The chips have an emissivity of ε=0.60 and a maximum allowable temperature of Ts=85oC. (a) If heat is rejected from the chips by radiation and natural convection, what is the maximum operating power of each chip? The convection coefficient may be approximated as h=11.7 W/m2K. (b) If a fan is used to maintain airflow through the enclosure and heat transfer is by only forced convection, with h=250 W/m2K, what is the maximum operating power
FUNDAMENTALS OF CONVECTION Consider a flat plate positioned inside a wind tunnel, and air at 1 atm and 20°C is flowing with a free stream velocity of 60 m/s. What is the minimum length of the plate necessary for the Reynolds number to reach 2x107? If the critical Reynolds number is 5x105, what type of flow regime would the airflow experience at 0.2 m from the leading edge? Please, I need the solution from fundamental concepts of how the heat flow behaves in the system. That it be answered with theory of the subject
A furnace wall is to consist in series of 7 in of kaolin firebrick, 6 in of kaolin insulating brick, and sufficientfireclay brick to reduce the heat loss to 100 Btu/ hr ft2 when the face temperatures are 1500 and 100°F,respectively.a) Show the figure of the systemb) What thickness of fireclay brick should be used?c) If an effective air gap of 1/8 in can be incorporated between the fireclay and insulating brick whenerecting the wall without impairing its structural support, what thickness of insulating brick will berequired?
Question 1: A glass window of width W = 1 m and height H = 2m is 5 mm thick and has a thermal conductivity of kg =1.4 W/m.K. If the inner and outer surface temperatures of the glass are 15 °C and -20 C, respectively, on a cold winter day, what is the rate of heat loss through the glass? To reduce heat loss through windows, it is customary to use a double pane construction in which adjoining panes are separated by an air space. If the spacing is 10 mm and the glass surfaces in contact with the air have temperatures of (last two digit of your Registration number) °C and -15 °C, what is the rate of heat loss from a 1 mx2mwindow? The thermal conductivity of air is ka = 0.024 W/m.K.
Calculate the heat loss per square foot of wall surface for a wallmade of 1-in. of plaster and 9-in. of common brick. The air velocityover the surface of the brick is 15 mph; the outside air temperature is40 °F, and the surface temperature of the plaster facing the room is 70°F.s
In the design of electronic components, it is very desirable to attach the electronic circuitry to a substrate material that is a very good thermal conductor but also a very effective electrical insulator. If the high cost is not a major concern, what material would you propose for the substrate?
Stainless steel tube is used to transport pharmaceutical liquids, it has an inner diameter of 40 mm and a wall thickness of 4 mm. The pharmaceutical and ambient air are at temperatures of 6 C and 23C, respectively, while the corresponding inner and outer convection coefficients are 400 W/m2.K and 6 W/m2 K, respectively.(a) What is the heat gain per unit length?(b) What is the heat gain per unit length if a 10 mm thickness layer of calcium silicate insulation (kins = 0.050 W/m. K) is applied to the tube?