a. Draw a rough sketch of a melting curve for the non-reacting eutectic mixture of Solids A and B.Given that the hypothetical melting point of pure solid A is 150°C and the hypothetical meltingpoint of solid B is 100°C. The eutectic point at temperature of 60°C corresponds to the 73mol%composition for B solid.b. Label the important regions corresponding to the:i. mol% axis for solids A and B.i. maximum melting temperatures for pure solid A and pure solid B.ill. the eutectic point.iv. molten (all liquid) regionv. all solid regionvi. region for solid A with meltvii. region for solid B with melt IV.a. Draw a rough sketch of a melting curve for the non-reacting eutectic mixture of Solids A and B.Given that the hypothetical melting point of pure solid A is 150°C and the hypothetical meltingpoint of solid B is 100°C. The eutectic point at temperature of 60°C corresponds to the 73mol%composition for B solid.b. Label the important regions corresponding to the:i. mol% axis for solids A and B.ii. maximum melting temperatures for pure solid A and pure solid B.ii. the eutectic point.iv. molten (all liquid) regionv. all solid regionvi. region for solid A with meltvii. region for solid B with melt

A question based on phase diagram that is to be accomplished.

a. Draw a rough sketch of a melting curve for the non-reacting eutectic mixture of Solids A and B. Given that the hypothetical melting point of pure solid A is 150°C and the hypothetical melting point of solid B is 100°C. The eutectic point at temperature of 60°C corresponds to the 73mol% composition for B solid. b. Label the important regions corresponding to the: i. mol% axis for solids A and B. i. maximum melting temperatures for pure solid A and pure solid B. ill. the eutectic point. iv. molten (all liquid) region v. all solid region vi. region for solid A with melt vii. region for solid B with melt

a. Draw a rough sketch of a melting curve for the non-reacting eutectic mixture of Solids A and B. Given that the hypothetical melting point of pure solid A is 150°C and the hypothetical melting point of solid B is 100°C. The eutectic point at temperature of 60°C corresponds to the 73mol% composition for B solid. b. Label the important regions corresponding to the: i. mol% axis for solids A and B. i. maximum melting temperatures for pure solid A and pure solid B. ill. the eutectic point. iv. molten (all liquid) region v. all solid region vi. region for solid A with melt vii. region for solid B with melt

Macroscale and Microscale Organic Experiments

7th Edition

ISBN:9781305577190

Author:Kenneth L. Williamson, Katherine M. Masters

Publisher:Kenneth L. Williamson, Katherine M. Masters

Chapter7: Extraction

Section: Chapter Questions

Problem 1Q

See similar textbooks

Similar questions

The analgesic aspirin is soluble at 25oC in water to the extent of 3mg/mL and in ethylacetate to the extent of 86 mg/mL. The approximate distribution coefficient of aspirin in these two solvents is __
1. Sodium carbonate is recovered as decahydrate from 1000kg of 5% solution of sodium carbonate in water. If it is desired that 95% of Na2CO3 is to be recovered as decahydrate by cooling to 278 K, determine the following: a) the mass of water evaporated (b) the mass of crystals obtained (Na2CO3 ∙ 10H2O). The solubility of Na2CO3 in water at 278K is 9.0% (weight) 2. A copra batch contains 44% oil and is to be extracted with n-hexane. The extracted meal contains 0.07 kg of oil/kg oil free matter and the mass fraction of n-hexane in it is 0.05. The extract contains 49% n- hexane. If 10,000 kg of copra are to be processed, how many kg of n-hexane are required and the determine the amount of extract. 3. Absorption of sulphur dioxide is carried out in a packed tower. Gas containing 14.8% sulphur dioxide and the rest inert gases enters the tower while the leaving gases contains 1% sulphur dioxide. Water flows at the rate of 1m3/min. The tower handles 7380 m3/hr of gas at 303K and 1 bar. Find…
Suppose you have a soil that is made up of 10% organic matter with CEC = 200 cmol/kg, 40% kaolinitewith CEC = 10 cmol/kg, and 50% vermiculite with CEC = 100 cmol/kg.1- Calculate the overall CEC of the soil by taking a weighted average of the three soil components.2- What percentage of the overall CEC is contributed by the organic matter? How does that numbercompare to the 10% of the soil itself that is organic?
Note: Express % strength with 4 decimal places. For ratio strength, state the volume only% Astelin nasal spray contains 0.1% azelastine hydrochloride and 125 mcg/mL of benzalkonium chloride as a preservative. A container is capable of delivering 200 metered sprays of 0.137 mL each. The percent concentration of benzalkonium chloride in the preparation is _______%, which is equivalent to a ratio strength of 1 in _____ w/v.
Q1. Dissolved 0.273 grams of pure sodium oxalate (Na,C,O.) in distilled water and added sulfuric acid and titration the solution at 70 ° C by using 42.68 ml of KMNO, solution and has exceeded end point limits by using 1.46 ml of standard oxalic acid (H; C;O.) with 0.1024 N. Calculate the normlity of KMN0.. Note that the molecular weight of sodium oxalate (Na,C,O.) = 134 and its equivalent weight = 67
There are two separate phases, one with a composition of 12% phenol and the other with a composition of 60% phenol, from a 210 gram phenol-water mixture with 35% phenol at 60oC. Calculate the masses of these phases.
Why was it necessary to keep the total volume of the reagents after mixing constant in all the kinetic runs (i.e., why was it necessary to add distilled water in inverse proportion to the quantity of Solution 1 that was required)?
Solution Calculations Using unit analysis, clearly show the set-ups for your calculations. You wish to prepare 50.0 mL of 2.30 x 10–2 M solution of Levothyroxine (hint-how many grams will you need of Levothyroxine?) 1. Describe how to prepare this solution from the pure drug and deionized water. Analytical balances and volumetric flasks are available to you. (Assume that Levothyroxine dissolves in water, at least to the extent necessary for this problem.) Use complete sentences in your description of the solution preparation process. a. A patient is given 2.0mL of a 3.00% (m/v) solution of Levothyroxine, how many milligrams of the drug did they receive? b. What is the molarity of a 3.00% (m/v) solution of Levothyroxine?
A 0.512 g sample of a commercial phosphate detergent was ignited at a red heat to destroy the organic matter. The residue was taken up in hot HCl, which converted the P to H3PO4. The phosphate was precipitated as MgNH4PO4.6H2O by addition of Mg2+ followed by aqueous NH3. After being filtered and washed the precipitate was converted to Mg2P2O7 by ignition at 1000 0C and the residue weighed 0.1151g. (a) What is the Gravimetric Factor to convert Mg2P2O7 to P? (b) Calculate the percent P in the sample could you type it out please
Using the phase diagram for mixtures of cyclohexane and toluene, estimate: A) Boiling point of pure toluene _________ B) Boiling point (Tbp) of solution with molar fraction of toluene 30%.______ C) Molar fraction of toluene (in %) in the gas phase above the solution with molar fraction of toluene 30% at its boiling point Tbp. ____________ D) Approximate molar fraction of solvent which remains in the liquid phase upon heating of mixture with 60% of toluene to 100oC. _______________
Pls do fast within 5 minutes and i will give like for sure Solution must be in typed form To plan a liquid–liquid extraction we need to know the solute’s distribution ratio between the two phases. One approach is to carry out the extraction on a solution that contains a known amount of solute. After the extraction, we isolate the organic phase and allow it to evaporate, leaving behind the solute. In one such experiment, 1.235 g of a solute with a molar mass of 117.3 g/mol is dissolved in 10.00 mL of water. After extracting with 5.00 mL of toluene, 0.889 g of the solute is recovered in the organic phase. If we extract 20.00 mL of an aqueous solution that contains the solute using 10.00 mL of toluene, what is the extraction efficiency?
(a) The heat evolved upon dissolution of atmospheric ozone into water is determined to be +5 kcal/mol at 298 K. Given that ozone has a Henry’s constant of 9.4 × 10−3 mol/L/atm at 298 K, determine its Henry’s constant at 273 K. Note that the definition of Henry’s constant is for the process air to water. (b) If the atmospheric ozone concentration in a polluted air is 100 ppbv, what is the concentration in equilibrium with a body of water in that region at 298 K? Note that you need to assume no losses of ozone other than absorption into water